• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.4
• /
• pp.280-288
• /
• 2009

In this paper, we developed new time information recording module of VSI (VLBI Standard Interface) format by analyzing the Mark5B recorder control and operation software with 1Gbps speed, which is able to record the weak signal of space radio source, through the Korean VLBI Network (KVN). The control and operation software of high-speed recorder consists of 2 kinds of software, which is that it can operate RAID control board by controlling large capacity HDD drive and the network control and operation. Especially, core software in high-speed recorder is able to output the results after performing and analyzing the input command. Through the analysis of control and operation software, new time information recording module, which is needed to process the observed data for correlation, is developed. New developed time information recording module can record the time information together after checking the interrupt of 1PPS(Pulse Per Second) input signal when the observed data will be recorded. To verify the normal operation of the developed time information recording module, we performed the real observation test and confirmed the effectiveness of developed software through analyzing the recorded observation data.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.575-580
• /
• 2004

In this work, a method is presented to find an anatomical site of a current source crudely in a standard brain using grand average of MEG data. Minimum norm estimation algorithm and truncated singular value decomposition were applied to calculate the distributed sources that can reproduce the measured signals. Grand average over all subjects was obtained from the transformed signals, which would be detected in a standard sensor plane by the obtained distributed current sources. In the simulation study, it was shown that the localized dipole using the grand average is consistent with the mean location of localized dipoles of all subjects within several mm even with large inter-individual differences of sensor positions. This result suggests that the mean location of low level signal source can be estimated as a dipole source in grand average and it was confirmed in the localization of the current source of N100m. when the localized dipole is registered on a standard brain. This result also suggests that the activity region obtained from grand average can be crudely estimated on a standard brain using the source location of the N100m as a reference point.

• Journal of Life Science
• /
• v.17 no.6 s.86
• /
• pp.783-790
• /
• 2007

G protein coupled receptors (GPCRs) transmit various extracellular signals into the cells. Upon binding of the ligands, conformational changes in the extracellular and/or transmembrane (TM) domains of CPCRs were propagated into the cytoplasmic (CP) domain of the molecule leading to the activation of their cognate heterotrimeric C proteins and kinases. Constitutively active GPCR mutants causing the activation of C Protein signaling even in the absence of ligand binding are of interest for the study of activation mechanism of GPCRs. Two classes of constitutively active mutations, categorized by their effects on the salt bridge between Ell3 and K296, were found in the TM domain of rhodopsin. Opsin mutants containing combinations of the mutations were constructed to study the conformational changes required for the activation of rhodopsin. Rhodopsin chromophore regenerated with 11-cis-retinal showed a thermal stability inversely correlated with its constitutive activity. In contrast, rhodopsin mutants exhibited a binding affinity to an agonist, all-trans-retinal, in a constitutive activity-dependent manner. In order to test whether the conformational changes responsible for the activation of trans-ducin (Gt) are the same as the conformation required for the recognition of rhodopsin kinase, analysis of the mutants were carried out with phosphorylation by rhodopsin kinase. Rhodopsin mutants containing combinations of different classes of the mutations showed a strong synergistic effect on the phosphorylation of the mutants in the dark as similar to that of Gt activation. The results suggest that at least two or three kinds of segmental and independent conformational changes are required for the activation of rhodopsin and the conformational changes responsible for activating rhodopsin kinase and Gt are similar to each other.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.2 s.52
• /
• pp.97-102
• /
• 2007

NMR experiments with various pulse repetition delay time were carried out for the $^{15}N\;and\;^{13}C$ of a natural gem diamond and synthetic diamonds. The natural gem diamond had a weak $^{13}C$ peak at 34.1ppm when 30 second pulse repetition delay time was applied. Similar but more prominent $^{13}C$ peaks were observed at 34.2 ppm with 0.5 second pulse repetition delay time and at 34.7 ppm with 50 second pulse repetition delay time for the synthetic diamonds. Any meaningful $^{15}N$ peak was not observed for either natural or synthetic diamonds due to extremely low content of the $^{15}N$. Significant relationship was observed between relative spin-lattice relaxation times we estimated and the content of impurities. however, it was not possible to distinguish natural diamond from synthetic diamonds due to very similar characteristics of their $^{13}C$ NMR signals except relative spin-lattice relaxation times.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.62-62
• /
• 2000

비접촉식 온도센서는 물체에서 방출하는 적외선 등의 복사신호를 열에너지로 전환하고 이를 다시 전기신호로 2차 에너지 변환하여 온도를 감지하는 센서로 인체 검지를 응용한 다양한 상품 및 교통, 방재, 빌딩 시스템 등의 분야에 널리 응용되고 있다. 비접촉식 적외선 센서는 열에너지를 전기에너지로 변환하는 방법에 따라 양자형과 열형으로 구분되며, 이중 양자형은 광전도나 광기전력 효과 등을 이용하여 감도 및 응답성이 우수하다는 장점을 지니고 있지만, 소자부를 80K 이하 온도로 유지시키는 냉각을 필요로 하므로 대형 제작이 불가피하고 그 용도가 제한적이다. 열형은 냉각이 필요 없고 소형으로 제작가능한 장점을 지니고 있어 써모 파일이나 초전체를 이용한 번용 센서가 보급되고 있다. 그러나 써모파일의 경우 출력되는 전기 신호가 미약하여 감도 및 응답성을 향상하기 위해 구조가 복잡하고, 특히 모터초퍼나 저항을 전압으로 변환시키는 전력기 등이 필요로 하는 단점을 지니고 있다. 따라서 이러한 문제점을 보완하기 위해 열전재료 박막을 이용한 적외선 센서를 개발하려는 노력이 진행중에 있다. 열전박막을 이용한 적외선 센서는 열전재료의 Seebeck 현상을 이용하여 열에너지에서 전기에너지의 변환이 자가발전으로 이루어져 offset과 외부 바이어스를 필요로 하지 않는다. 또한 작은 온도 변화에도 그 감도와 응답성이 높고, 출력신호가 커서 증폭기 등이 불필요한 장점을 지니고 있다. 특히 초전형 센서가 상온에서도 기판에 대한 열 확산을 제어해야 하는 문제점을 갖는 반면, 열전박막형 적외선 센서는 고온에서도 안정된 출력 신호를 얻을 수 있어 그 활용 온도 범위가 크게 확대될 것으로 기대된다. 본 실험에서는 우수한 열전특성을 갖는 (Bi1-xSbx)2Te3 박막을 얻기 위해 열팽창계수가 작고 알칼리 원소가 0.3% 이하로 포함되어 있는 corning glass(# 7059)를 기판으로 사용하였다. 또한 최적의 열전특성을 나타내는 조성을 실험적으로 구하기 위해 (Bi0.2Sbx)2Te3 조성의 합금 타？ 위에 Bi2Te3 및 Sb2Te3 chip을 올려놓고 그 면적을 변화시켜 다양한 조성의 열전박막을 증착하였다. 열전박막의 증착시 산화와 오염에 의한 열전특성 변화를 최소화하기 위해 초기진공도를 1$\times$10-6 Torr로 하였으며, Ar 가스를 흘려주어 2$\times$102 Torr 의 증착진공도를 유지하였다. 열전박막을 증착하기 전에 기판을 10분간 200W의 출력으로 RF 처리하였으며, 30$0^{\circ}C$에서 33 /sec의 속도로 (Bi1-xSbx)2Te3 박막을 증착하였다. 이와 같이 제조된 (Bi1-xSbx)2Te3 박막의 미세구조를 SEM으로 관찰하고 EDS로 조성을 분석하였으며, XRD를 이용하여 결정성을 관찰하였다. 또한 (Bi1-xSbx)2Te3 박막의 Seebeeck 계수 및 전기비저항을 측정하고 증착된 박막조성, 결정상, 미세구조와 열전특성간의 상관관계를 고찰하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.182-188
• /
• 2006

In this study, we have designed the millimeter-wave passive imaging system which records energy that is reflected or emitted from the source and produces image. The lens and front-end of receiver appeared to be important in the system to detect input thermal noise signal. The lens for signal focusing has been designed by optical transfer function. Amplifier of the imaging systemhas been set up with 40dB in maximum gain, 5 dB in maximum noise figure, and 10GHz in bandwidth to enhance sensitivity for thermal noise and to receive it in wide-band width as well. The SBD MSS-20 141B10D diode has been used for the detector circuit to convert amplified millimeter-wave signals to DC output.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.89-95
• /
• 2008

The introduction of wireless information technology gives rise to new mobile services in all kinds of areas of out daily life. Mobile healthcare system is a production of composite ICT (Information and Communication Technology) which focused on signal sensing, processing, and communication in wireless environment. The mobile and wireless revolution promises not only expanded access to patient health information, but also improved patient care. In this paper, we describe a surrogate host based mobile healthcare information system which utilized Grid computing for real-time ECG signal processing. The surrogate host provides seamless interface between mobile device and Medical Grid portal. The security extension of GSI (Grid Security Infrastructure) allows mobile users to access Grid portal in a secure and convenient manner. The presented system architecture can be used as a secure enterprise mobile healthcare system for hospital physicians.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.4
• /
• pp.1-9
• /
• 2003

Many CDMA systems provide pilot channels in order to help channel estimation process. Especially in wideband CDMA systems, the number of receive diversity paths can be large due to small chip duration and high multi-path resolution capability. Hence, the received signal power of each path is small for a given total SNR (signal-to-noise ratio) and the pilot power of each path may not be sufficiently large for accurate channel estimation. When the pilot power is small, one can use decision-directed channel estimation to utilize more energy of the received data. However, the decision errors can deteriorate the quality of decision-directed channel estimation. This paper proposes a novel channel estimation method that optimally utilizes receiver decisions as well as pilot symbols with the help of estimated SER (symbol error rate) and SNR. The proposed method computes two channel estimates using the pilot and the data channel filters and optimally combines them. The simulation results show that the proposed method is robust and outperforms the conventional pilot-symbol-aided channel estimation method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.51-57
• /
• 2007

In this paper we introduce the concept of MPLS-based VPN and propose a scheme for providing VPN services in MPLS networks. Furthermore, we design the control components and the operational procedures and evaluated the performance of traditional VPN implementation methods and MPLS-based VPN. In this scheme it is possible to solve several problems that IP-based VPN pertains via the allocation of VPN ID and virtual space without tunneling, thereby providing effective VPN services. In other words, the MPLS-based VPN scheme uses MPLS networking technology together with the PSTN which can achieve a perfect segregation of user traffic on per-customer basis in a physical link and can guarantee high reliability and security levels. Specially, in the perspective of customers, it can save networking facilities installation and maintenance costs considerably. On the contrary, it possesses some shortcomings in that its deployment tends to be restricted within an ISP's network boundary and it is vulnerable to external security break-ins when going through public networks such as the Internet due to its lack of data encryption capability.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.4
• /
• pp.272-278
• /
• 2007

In this paper, we present an automated API translator for embedded software development based on a model-driven approach. Since MDA(Model Driven Architecture) provides little support for the development of embedded software, we propose a new method which contains the MDA's advantage, automation of implement process, and can solve the problem of real-time overhead. First, we define 'generic APIs' which do not depend on any RTOS's but provide most of typical RTOS services. We can describe RTOS-related behaviors of target application using these generic APIs in a CIC(Common Intermediate Code). Then, we propose a transformation tool for translating a CIC using generic APIs into a C-code for specific RTOS. The proposed API translator converts them into C-code using XML transformation rule which is defined outside. It indicates that an API translator extends to other RTOS's by modifying or adding the transformation rule. From the experiment, we validate the proposed method.