• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.10
• /
• pp.851-856
• /
• 2016

Despite all the recent advances in biodegradable material-based microneedles, the bending and failure (especially buckling) of a biodegradable microneedle during skin tissue insertion remains a major technical hurdle for its large-scale commercialization. A reduction in skin tissue puncture force during microneedle insertion remains an essential issue in successfully developing a biodegradable microneedle. Here, we consider uniaxial and equibiaxial prestrains applied to a skin tissue as mechanophysical stimuli that can reduce the skin tissue puncture force, and investigate the effect of prestrain on the changes in skin tissue puncture force. For a porcine skin tissue similar to that of humans, the skin tissue puncture force of a flat-end microneedle is measured with a z-axis stage equipped with a load cell, which provides a force-time curve during microneedle insertion. The findings of this study lead to a quantitative characterization of the relationship between prestrain and the skin tissue puncture force.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.922-923
• /
• 2011

비파괴 검사방법 중 자기누설 방법을 이용한 방법은 높은 자기 투자율을 갖고 있는 배관 검사에 적합하다. 자기누설 방식이 적용된 시스템을 MFL PIG라고 한다. MFL PIG는 금속 손실이나 부식과 같은 결함을 검출하는데 높은 성능을 보인다. 하지만 이 시스템은 축방향으로 자기장을 형성하여 투자율이 큰 금속 배관을 포화시켜 결함이 있는 부분에서 발생하는 누설자속을 검출하는 방식이기 때문에 축방향으로 발생하는 미소 결함은 자기장이 통과하는 단면이 작고 누설자속이 거의 없어 검출이 어렵다. 축방향 미소결함을 검출하기 위해 기존의 MFL PIG를 개선시킨 것이 CMFL PIG이며, 이것은 자기장을 원주방향으로 형성하여 결함에서의 자기 누설을 최대화 가능하다. 본 논문에서는 축방향 미소 결함의 검출이 가능한 CMFL 비파괴 검사 방법에 관한 논의와 이를 이용하여 축방향 결함의 위치이동에 따른 왜곡 신호의 분석 및 보정하는 방법에 관해 제안한다.

• Journal of the Korean Magnetics Society
• /
• v.23 no.1
• /
• pp.18-25
• /
• 2013

MFL PIG (Magnetic Flux Leakage Pipeline Inspection Gauge) is called the system which detects the defect for underground pipelines by using magnetic flux leakage method in nondestructive testing. This method is very suitable for testing pipelines because pipeline has high magnetic permeability. MFL PIG generates the magnetic fields to the pipe axially oriented, and detect the signal of leakage flux by using hall sensor. However, MFL PIG is hard to detect the axially oriented crack with small size because the magnetic flux leakage is not enough to be occurred. To detect the small size and axially oriented crack, the circumferential MFL (CMFL) PIG is being proposed and it can maximize the leakage flux for the axial crack by performing magnetic fields circumferentially on the pipe. In this paper, CMFL PIG is applied to detect the axially oriented crack with small size and the analysis for the distribution and the amplitude of the leakage flux signal is performed by using three dimensional finite element method. From sensing signals, the method how to determine the shape of axially oriented cracks is proposed and verified with experiment.

• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.25-33
• /
• 2004

In this paper, we briefly introduce the micro-vibration test bench of KARI and the test and analysis method of RWA(Reaction Wheel Assembly) micro-vibration. The micro-vibration of RWA is measured on a KISTLER dynamic plate which can measure the time signal of 6 DOF simultaneously up to 400Hz. Measured data are extensively evaluated with respect to the wheel spin rate to identify the complicate wheel dynamic characteristics, and the static/dynamic unbalances are estimated from the extracted first harmonic component as a part of evaluation process. The estimated static and dynamic unbalances. 0.79gcm and 17.4gcm² respectively. The structural resonance mode and two rocking modes observed as a results of its frequency analysis. Several higher order harmonic components observed, which come from its rotor shape as well as the wheel bearing characteristics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.124-124
• /
• 2004

최근 MEMS공학의 발전으로 미소 가공물과 그 미소 가공물을 가공하는 공작기계의 발전이 두드러지고 있다. 마이크로 성형기는 이러한 미소 가공물을 만드는 공작기계들 중의 하나이다. 마이크로 성형기(micro former)는 마이크로 홀(micro holl)을 만드는 성형기로써 크랭크 축의 회전에 의한 펀치의 직선 운동으로 마이크로 홀을 뚫는 성형기이다. 마이크로 홀을 성형할 때에는 상하, 좌우의 미세한 변위가 생길 수 있다.(중략)

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.9
• /
• pp.784-793
• /
• 2017

A two-axis gimbal-type X-band antenna mounted on an observation satellite can efficiently transmit high-capacity image data to a ground station regardless of both the satellite position and the orbital motion. However, this X-band antenna induces unnecessary micro-jitter which can degrade the image quality of the high-resolution observation satellite. Therefore, to achieve the high-resolution image quality from the observation satellite, micro-jitters have been required to be isolated. In this study, to resolve aforementioned drawback, we proposed blade gear using a shape memory alloy (SMA) applied to azimuth stage of X-band antenna. To investigate the rotational basic characteristics of the proposed SMA blade gear, we performed rotational static loading test. Futhermore, to evaluate the cycle to failure of the gear, accelerated life test was conducted. The temperature test was conducted to confirm rotational basic characteristics at various temperature conditions. To verify the isolation performance for micro-jitter, we performed micro-jitter measurement test.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2012.05a
• /
• pp.45-46
• /
• 2012

• Journal of Aerospace System Engineering
• /
• v.12 no.2
• /
• pp.46-58
• /
• 2018

A two-axis gimbal-type X-band antenna is widely used to transmit bulk image data from high-resolution observation satellites. However, undesirable microvibrations induced by driving the antenna should be attenuated, because they are a main cause of image-quality degradation of the observation satellite. In this study, a pseudoelastic memory alloy (SMA) gear was proposed to attenuate the microvibrations by driving the antenna in an azimuth angle. In addition, the proposed gear can overcome the limitations of the conventional titanium blade gear, which is not still enough and is vulnerable to plastic deformations under excessive torque. To investigate the basic characteristics of the proposed SMA mesh washer gear, a static load test was performed on the thickness of the SMA mesh washer and the rotation of the gear. Moreover, The microvibration measurement test demonstrated that the SMA mesh washer gear proposed in this study is effective for microvibration attenuation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.420-424
• /
• 2012

A 2-axis gimbal system is one of main disturbance sources affecting on image jitter response of a satellite. The gimbal system can be rotated on its azimuth and elevation axes, resulting in variation of its moment of inertia and structural modes, so that generates non-linear vibration characteristics. In order to estimate the jitter response, it is an indispensable process to characterize micro-vibration disturbance of the 2-axis gimbal system. In the present research, the vibration characteristics of the 2-axis gimbal system was investigated with respect to the types of stepping motors. The micro-vibration tests were performed for 2-phase and 5-phase stepping motors. The test results show that the disturbance can be reduced with vibration attenuation ratio of 60% by replacing the 2-phase stepping motor with the 5-phase one.

• Journal of Korea Multimedia Society
• /
• v.14 no.11
• /
• pp.1373-1382
• /
• 2011

In this study, we propose an automated smile analysis system for self smile training. The proposed system detects the face area from the input image with the AdaBoost algorithm, followed by identifying facial features based on the face shape model generated by using an ASM(active shpae model). Once facial features are identified, the lip line and teeth area necessary for smile analysis are detected. It is necessary to judge the relationship between the lip line and teeth for smiling degree analysis, and to this end, the second differentiation of the teeth image is carried out, and then individual the teeth areas are identified by means of histogram projection on the vertical axis and horizontal axis. An analysis of the lip line and individual the teeth areas allows for an automated analysis of smiling degree of users, enabling users to check their smiling degree on a real time basis. The developed system in this study exhibited an error of 8.6% or below, compared to previous smile analysis results released by dental clinics for smile training, and it is expected to be used directly by users for smile training.