• The Korean Journal of Quaternary Research
• /
• v.7 no.1
• /
• pp.69-91
• /
• 1993

A total of 76 surface sediment samples, collected from the Korean west coast and the eastern Yellow Sea areas, were analyzed for their elemental composition in order to understand the geochemical characteristics of these deposits. The analyzed elements included 9 major elements (Al, Fe, Na, K, Mg, Ca, Ti, P, Mn), 8 minor elements (Sr, Ba, V, Cr, Co, Ni, Cu, Zn), organic carbon and calcium carbonate. Contents of most analyzed elements, excluding K and Ba, were generally low compared to those of average crust. Contents of most elements, except K and Ca, also correlated with sediment grain size, though the degree of relationship varied widely from one element to another. For fine-grained sediments, a distinction could be made between those in the central Yellow Sea and those in the Keum Estuary based on their characteristic elemental composition: the former were rich in Fe, Na, K, Mg, Ca and V, and the latter in Mn, Co and Ni. The element/aluminium ratios, on the other hand, showed that the central Yellow Sea muds were enriched in Fe, Mg, V, Ni, Cu and Zn and depleted in K, Mn, Ba and Sr relative to the mud located near the Korean Peninsula. Based on the analysis of these results, as well as of the influences of particular mineral phases or pollution effects, we could suggest geochemical criteria which can be used in distinguishing muds from the two different sources, the Keum River and the Yellow River: the former by the higher Mn content and the latter by the higher Mg and V contents, relative to each other.

• Journal of the Korean Chemical Society
• /
• v.50 no.1
• /
• pp.14-22
• /
• 2006

the basic model of chemical reactor using glow discharge, we used cathode discharge cell with vacant cavity in the middle. Currently glow discharge is widely studied as a radiation source or atomization device in atomic spectroscopy and remarkable technological achievements are made through the graft with other analysis devices such as microanalysis and steel analysis.1 Additionally, as the characteristics of basic glow discharge and radiation have been reviewed many times, those results could be used in this experiment.2-3 In 1993, an article regarding the treatment of poisonous gas in the air using low temperature plasma was published. According to this article, if DC Glow Discharge is used under continuous atmospheric flow, poisonous gases such as SO2 and NO can be removed.4 Based on those findings, we designed highly efficient reactor where stable air plasma is composed and all air flow pass the negative glow area passing through the tube. It was observed that the cathode tube type glow discharge developed in this study would be economical, easy to use and could be used as radiation source as well.

• Journal of the Mineralogical Society of Korea
• /
• v.13 no.2
• /
• pp.96-114
• /
• 2000

춘천 연옥은 색깔에 따라 세가지 유형 (연녹색, 암녹색, 및 회색 연옥)으로 구분되고 이들은 각기 서로 다른 조직과 조성을 나타낸다. 연녹색 연옥이 이중에서 가장 일반적인 유형이다. 연옥은 주로 극미립의 연옥질 투각섬석으로 구성되고 여기에 미량의 휘석, Mg-녹니석 및 방해석이 불순물로서 수반된다. 연옥질 투각섬석 결정들은 그 폭이 5$\mu\textrm{m}$ 이하의 극미립질 침상 결정형을 이루며 서로 치밀하게 얽혀있는 연옥 특유의 조직을 나타낸다. 주사전자현미경 하에서 (110)의 벽개면의 발달이 현저하고, 주사탐침현미경 하에서는 벽개면을 가로지르는 방향으로 특징적인 조선이 나타나는 것이 특징이다. 연옥질 투각섬석은 투과전자현미경 하에서 흔히 단쇄형과 복쇄형이 결합한 3중쇄형 격자가 복쇄형의 투각섬석 구조 내에서 불규칙적으로 협재되는 혼성격자 구조가 발달하는 것이 특징이다. 드물지만 5중쇄형 격자와 4중쇄형 격자도 관찰되는데, 이 같은 불규칙한 격자 혼재상은 회색 연옥에서 보다 현저한 경향을 보인다. 이와 같은 혼성격자 구조형의 존재는 춘천 연옥이 열역학적으로 비평형 상태에서 형성되었음을 시사하는 것으로 여겨진다. 리트벨트법에 의한 구조검증을 통해서 구해진 연옥질 투각섬석들의 격자상수 값들은 X-선회절의 경우, a=9.837(1)~9.9804(4)$\AA$, b=18.046(2)~18.062(1)$\AA$. c=5.2765(7)~5.2803(3)$\AA$, $\beta$=104.717(9)~104.786(3)$^{\circ}$로 계산되었다. 이에 비해서 중성자 회절법에 의해서 측정되 격자 상수 값은 a=9.8841(6)~9.8933(7)$\AA$, b=18.1429(7)~18.161(2)$\AA$, c=5.3024(3)~5.3060(7)$\AA$, $\beta$=104.698(7)~104.771(4)$^{\circ}$로서 X-선회절에 의한 값들과 약간의 차이를 보인다. 연옥질 투각섬석은 Ca에 대한 Mg의 치환에 의해 M(4) 자라의 크기가 작아지면서 b축의 단위포도 함께 줄어드는 결정화학적 특징을 나타낸다. 이는 중성자 회절분석에 의해서 구해진 M(4)의 자리점유율과 M(4)-O의 원자간 거리에 의해서도 확인된다. 그러나 연옥질 투각섬석에 대한 리트벨트법에 구조검증 결과는 연옥의 유형별 미시적 광물상과 혼성격자 구조형의 특징에 별다른 연계성이 없는 것으로 나타났다.

• Journal of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.423-432
• /
• 1986

Atomic absorption spectrophotometric (AAS) determination of hexavalent chromium [Cr(VI)] in a waste water was studied. Cr(VI) was extracted with p-xylene from the wastewater, in the way of ion pair formation with anion exchanger aliquat-336(tri-caprylmethyl ammonium chloride). 100ml waste water, after organic materials were extracted out with toluene, was acidified with conc. HCl adjusting the medium to pH 0.5 and 20ml of p-xylene containing 0.01M aliguat-336 was used to extract Cr(VI) from the acidified solution. The absorbance of chromium was measured with air-acetylene flame at 357.9nm. Standard addition method was used in the determining concentration of Cr(VI) extracted. No interference has been found in the extraction of Cr(VI) by the Al(III), Fe(III) and Cr(III) ion presented. However, Fe(II) decreased the absorbance of Cr(VI), due to the fact Fe(II) reduces Cr(VI) to Cr(III). The contained organic material was removed prior to extracting process, since it may reduced the absorbance of Cr(VI). The recovery of added Cr(VI) was over 96%, which seems to be promising and the relative standard deviation was 3.95%

• 보존과학연구
• /
• s.35
• /
• pp.5-23
• /
• 2014

The possibility of non-destructive inspection glass beads for verification. Conduct a comparative analysis of the Chungcheong area with glass beads excavated Age-specific characteristics of the glass beads shall be classified by region. Trace amounts of ingredients such as CaO, $Al_2O_3$ (stabilizer), MgO, the difference is negligible. $SiO_2$ (subjects), $Na_2O$ (flux) analysis and the difference between the values was greater than in the other ingredients. Composition differences occurred rough surface to a non-uniform cross-section analysis is considered. Minimize the error value, such as the surface of carbon-coated Study, there are additional requirements. Produced at the time of the social and cultural characteristics of ancient glass and important archaeological materials, and to inform the process of cultural exchange between each region in the production of glass technology era according to the level of science and technology, arts and crafts, can be identified.

• Journal of the Korean Chemical Society
• /
• v.44 no.2
• /
• pp.109-114
• /
• 2000

In this study, the optimum analytical condition of Differential pulse Voltammetry for the polymeric Sodium Alginate was studied and its reduction funtional groups were confirmed using Cyclic Vol-tammetry and IR spectroscopy. Optimum conditions were as followed; mercury drop size : medium size, accumulation time : 60sec, accumulation potential : -0.20V vs Ag/AgCl, scan rate : 100mV/sec, supporting electrolyte : 0.10M $NaClO_4$(pH 6.8). After polymeric Sodium Alginate was hydrolized at $100^{\circ}C$ in acidic condition, the current peaks of oligomer were compared with current peak of polymeric Sodium Alginate. In this optimum condition, calibration curve of polymer Sodium Alginate showed good linearity from 0.50ppm to 4.0ppm where as oligomeric Sodium Alginate showed good linearity from 0.05ppm to 0.24ppm.

• Journal of the Korean Chemical Society
• /
• v.38 no.11
• /
• pp.819-826
• /
• 1994

This study described a simple, rapid and cost effective analytical technique for the ultra-trace analysis of dioxins in environmental samples. Liquid-Liquid extraction methods were used for the initial extraction and enrichment of the analyte. Subsequent clean-up procedures were achieved by using strong cation exchanger, silica and Florisil cartridges. Extracts were analysed by HRGC/HRMS-SIM. The efficiency of these analytical methods was tested by recovery and selectivity for elimination of interferences such as phenols, pesticides and PCBs in each step. The mean recovery of 1,2,3,4-TCDD spiked at 10 ppt in sea water was about 92(${\pm}$1.6)%. This analytical method was applied to Kwangyang sea water and 4.5pg/L of 2,3,7,8-TCDD was determined.

• Journal of the Korean Chemical Society
• /
• v.48 no.1
• /
• pp.17-27
• /
• 2004

A procedure based on solid phase microextraction extraction(SPME)-GC/MS has been developed for the simultaneous analysis of plasticizers. The plasticizers investigated in this study are dimethyl phthalate(DMP), diethyl phthalate(DEP), dibutyl phthalate(DBP), benzylbutyl phthalate(BBP), diethylhexyl phthalate (DEHP), di-n-octyl phthalate(DnOP). The limit of detection(LOD) was 0.163~0.299 with relative standard deciation(RSD) of 5.85~15.80% for these compounds. At water reserviors of Han, Geum, Nakdong and Sumjin rivers, only DBPand DEHP were detected at trace level, 0.192~1.270 ng/ml for DBP and 0.077~1.102 ng/ml for DEHP depending on the river.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.3
• /
• pp.427-433
• /
• 2013

This study was designed to examine changes in the physicochemical properties of extruded corn fibers with different amounts of feed moisture (30, 40, and 50%). The screw speed and die temperature were fixed to 200 rpm and $140^{\circ}C$, respectively. The crude ash, fat, and protein in corn fiber decreased from the extrusion process. The insoluble dietary fiber in corn fibers decreased, while soluble dietary fiber increased at a feed moisture of 30%. The specific length of the extruded corn fiber increased while the specific mechanical energy input, density, breaking strength, and elastic modulus decreased. The water absorption index (WAI) and reducing sugar content of the corn fibers did not significantly change, but the water soluble index (WSI) decreased as the feed moisture content of the corn fiber increased. On the other hand, the WAI of de-starched corn fiber decreased while WSI and reducing sugars increased as the feed moisture content of the corn fiber increased.

• Microbiology and Biotechnology Letters
• /
• v.35 no.1
• /
• pp.52-57
• /
• 2007

A gas-circulating bioreactor was used for enrichment of autotrophic methanogens. Mixture of hydrogen and carbon dioxide (5:1) was used as a sole energy and carbon source. Anaerobic digestive sludge isolated from wastewater treatment system was inoculated into the gas-circulating bioreactor. The enrichment of two chemolithotrophic methanogens, Methanobacterium curvum and Methanobacterium oryzae was accomplished in the gas-circulating bioreactor. The enriched bacteria were cultivated in a bioreactor equipped with hollow-fiber hydrogen-supplying system (hollow-fiber bioreactor), and a hybrid-type bioreactor equipped with hollow-fiber hydrogen-supplying system and electrochemical redox control system. The methane productivity was maximally 30% (V/V) in the hollow-fiber bioreactors and 50% (V/V) in the hybrid-type bioreactor.