Jeon, Min Jae;Park, Min Jeong;Hur, Suel Hye;Min, Byung Whan
Journal of agriculture & life science
/
v.51
no.1
/
pp.35-43
/
2017
This research was carried out to excessive water tolerance test among corn accessions collected from India to breed corn cultivars targeting India market. The corn accessions were 20 Inbred lines and cultivars from India as well as Korean cultivars Gwangpyungok and Chaloksusu. Excessive water tolerance test was done in the green house by immerging the pots containing corn seedlings for two weeks. Then, the plant heights were measured to compare the control plants that were not grown in the immerging state. The results showed that seven accessions of high tolerance in flooding; H2(92.9%), H18(88.8%), CN114A(98.1%), CN351A(94.3%), Super900M(95.3%), P3394(98.8%), 31N27(96.7%) in which the percent is comparison to the control plants. Whereas nine accessions showed high damage by immerging; H1(78.9%), H8(73.4%), H10(77.1%), H19(79.0%), H26(74.1%), H31(75.7%), H34(77.5%), H36(77.4%), H40(74.6%). However, the reduction on the contents of chlorophyll a, chlorophyll b, carotenoids in leaf revealed contrast results to the flooding tolerance. Particularly, H36($7.249{\mu}g{\cdot}mg^{-1}$) and H40($7.642{\mu}g{\cdot}mg^{-1}$) showed rapid reduction in the chlorophyll a content during the flooding treatment. Whereas two Indian commercial varieties 37N27($0.630{\mu}g{\cdot}mg^{-1}$) and P3394($1.208{\mu}g{\cdot}mg^{-1}$) showed slight reduction. The reduction of chlorophyll a and carotenoid contents was positively correlated during the excessive water stress.
This paper discusses the Historical significance of Li-thought at the Hoejae, Lee-Eonjeok's Bongseonjabui. In this study, I tried to derive the value and meaning in the history of the Chosun Dynasty by examining the comparison between the Bongseonjabui and Book of Ancestor-memorial Ceremonies written in the 16th century The following is a summary of the Historical significance of Li-thought of Bongseonjabui. First, it is the first concrete result of the Chosun Dynasty concerning the Family Rituals. Second, it is characterized not only the description of actual procedures but also the explanations of both the theory and reality in Ancestor-memorial Ceremony. Third, it is an example of harmonizing with the national system and the customs of time by applying to the situation of Chosun society at that time. Fourth, it is an example that focuses on the essential meaning of the Ancestor-memorial Ceremony, not the attitude of one side the Zhu Xi's Family Rituals as in the later books.
Journal of The Korean Association For Science Education
/
v.41
no.2
/
pp.115-131
/
2021
As the global climate change emergency is escalating, the need for 'Social Action-Oriented SSI (SAO-SSI) on climate change topics' in science education that can change society through social activity is increasing. By employing sociocultural theory, this study explores the challenges of limiting teacher's agency in implementing SAO-SSI on climate change topics in science education. Data from participant observation for 46 lessons, in-depth interviews with participants, field notes, and teacher reflection notes were analyzed by the structure of into micro- (classrooms), meso- (school), and macro- (Korea society) level. At the micro-level, the teacher's new attempts of SAO-SSI on climate change topics class made it difficult for him to identify students' understanding of climate change, because they have a low sense of perception that climate change is also their problem. In addition, the teacher had difficulties leading students' into an engagement for social action because students were skeptical about the feasibility of planned social behavior by positioning themselves as children or had difficulty in understanding social action and sympathizing with its values. At the meso-level, a school culture that encourages the implementation of a curriculum similar to that of colleagues, it was difficult to implement one's own curriculum. And it was difficult to develop expertise without the support and communications with colleagues who revealed the burden of unfamiliar science topics of climate change. In addition, conflicts arose in the process of implementing out-of-school social actions with the principal's passive support. At the macro-level, the insufficient proper material resources for SAO-SSI on climate change topics class, and negative perceptions on the students' social action in the society were acting as constraints. We offer implications for what kind of structural support and efforts from various subjects in the educational community should be provided to implement SAO-SSI on climate change topics class in science education.
Park, Eun-Ji;Kim, Nam Young;Shim, Jae-Han;Lee, Jung Mi;Jung, Yong Hyun;Oh, Jae-Ho
Journal of Food Hygiene and Safety
/
v.36
no.3
/
pp.228-238
/
2021
The aim of this research was to develop a rapid and easy multi-residue method for determining dimethipin, omethoate, dimethipin, chlorfenvinphos and azinphos-methyl in agricultural products (hulled rice, potato, soybean, mandarin and green pepper). Samples were prepared using QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) and analyzed using gas chromatography-tandem mass spectrometry (GC-MS/MS). Residual pesticides were extracted with 1% acetic acid in acetonitrile followed by addition of anhydrous magnesium sulfate (MgSO4) and anhydrous sodium acetate. The extracts were cleaned up using MgSO4, primary secondary amine (PSA) and octadecyl (C18). The linearity of the calibration curves, which waas excellent by matrix-matched standards, ranged from 0.005 mg/kg to 0.3 mg/kg and yielded the coefficients of determination (R2) ≥ 0.9934 for all analytes. Average recoveries spiked at three levels (0.01, 0.1, 0.5 mg/kg) and were in the range of 74.2-119.3%, while standard deviation values were less than 14.6%, which is below the Codex guideline (CODEX CAC/GL 40).
Ground investigation and result analysis generally used to examine all sorts of structures' subsidence or stability can be classified into sandy soil and cohesive soil, and analysis on the liquid limit of soil is utilized to evaluate the physical properties of ground and types or technical behavior of soil. The most widely used method to analyze liquid limit is Casagrande with which liquid limit can be calculated relatively easily; however, it is fairly difficult to apply it to soil equipped with intermediate properties. Therefore, concerning the properties of soil having the intermediate properties of sedimentary ground, this researcher mixed the clay from Yangsan, Gwangyang, and Busan with sandy soil to make intermediate soil and then carried out the test of consistency limit and also evaluated applicability by using the suggested formula of consistency revision. The sample of intermediate soil was the mixture of clay and sandy soil, and to produce intermediate soil, the content (Fc) of fine soil was applied as 50%, 75%, or 100%. Regarding the physical properties of intermediate soil, to maintain the properties of clay in the natural state, bentonite was added at a fixed rate for controlling the properties of clay, and then, consistency was analyzed. By adopting the formula of consistency revision suggested in advanced research, this author analyzed consistency based on the experiment and consistency based on the suggested formula of revision. Also, about intermediate soil collected at the site, consistency based on the experiment and consistency based on the suggested formula of revision were analyzed comparatively, and about intermediate soil collected, this researcher analyzed particle size and calculated the content (Fc) of fine soil to analyze intermediate soil in diverse conditions. Moreover, about intermediate soil collected at the site, the suggested formula of consistency revision was applied to calculate the compression index, and the compression index based on the experiment and the compression index based on the suggested formula were analyzed comparatively to evaluate the applicability of the suggested formula.
Journal of the Korean Applied Science and Technology
/
v.38
no.3
/
pp.824-831
/
2021
1, 2-Octanediol galactoside (OD-gal) has been synthesized from 1, 2-octanediol (OD), as a safer cosmetic preservative, using recombinant Escherichia coli β-galactosidase (β-gal). To confirm the molecular structure of synthesized OD-gal, mass spectrometry and NMR (1H- and 13C-) spectroscopy of OD-gal were carried out. In the reaction mixture, a sodium adduct ion of OD-gal (m/z=331.1732) was identified using mass spectrometry analysis. In addition, 1H NMR spectrum of OD-gal showed multiple peaks corresponding to the galactosyl group, which is evidence of galactosylation on OD. Downfield proton peaks at δH 4.39 ppm and multiple peaks from δH 3.98~3.55 ppm were indicative of galactosylation on OD. Up field proton peaks at δH 1.52~1.26 ppm and 0.89 ppm showed the presence of CH2 and CH3 protons of OD. 13C NMR spectrum revealed the presence of 24 carbons suggestive of α- and β-anomers of OD-gal. Among 14 carbon peaks from each anomer, the 4 peaks at δC 31.4, 29.0, 22.3, and 13.7 ppm were assigned to be overlapped showing only 24 peaks out of a total of 28 peaks. The mass value from mass spectrometry analysis of OD-gal, and 1H and 13C NMR spectral data were in good agreement with the expecting structure of OD-gal. Finally, we identified a galactose molecule from the hydrolysate of OD-gal using β-gal. We are expecting that through future study it will eventually be able to develop a safe cosmetic preservative.
The Buddha triad and 16 Arhat statues carved on the rock surface at Seongbulsa temple is the only domestic remaining example of all 16 Arhats, so its academic value is very high. However, it is severely damaged and so required a stability evaluation through study of digital documentation and precise diagnosis for the purpose of comprehensive conservation. This process established that the Buddha statues were of similar scale, while the Arhats showed a wide variety of sizes, and the two kith and kin in the volume were larger than the Arhats. It was estimated that the statues of food for Buddha are similar to the Arhat statues, and most of the statues are well-formed. The rock used to carve the Buddha statues is banded gneiss with distinct foliation, alternating between white bands of quartz and feldspar and black bands composed of biotite. The Buddha statues have been damaged by physical weathering, discoloration, and biological contamination. In damage evaluations, joint (3.6 crack index), peeling (5.2%), exfoliation (1.7%), and falling off (0.1%) were observed on the rock surface of the Buddha statues. In particular, due to severe biological weathering, stage 9 and 10 biological coverage of the rock surface accounted for 57.5% of the total area, and stages 5 to 8 also accounted for a high share at 22.3%. The discoloration factors were shown to be dark brown and white with Fe, Ca, and S, and a large amount of C detected in the blackened contaminants, and the damage weight high in all areas. Discontinuities in different directions were identified in the rock surface. Analysis of potential rock failure types indicated that there is a possibility of plane and toppling failure, but wedge failure is unlikely to occur. The mean ultrasonic velocity of the main rock surface was 2,463m/sec, the lower part of the left side with a large number of joints was relatively low, and the highly weathered (HW) type to the completely weathered (CW) type concentrated distribution, showing weak properties. For the Buddha statues, conservation treatment is required for about 14.9% of micro cracks and 58.9% of exfoliation cracks. In addition, in order to improve the conservation environment of the Buddha statues, maintenance of drainage and ground preparations for the rock surface gradient and plants are necessary, and protection facilities should be reviewed for long-term conservation and management purposes.
Kim, Hee-Jin;Jeon, Jin-Joo;Kim, Hyun-soo;Son, Jiseon;Kim, Kwang-Yeol;You, Are-Sun;Hong, Eui-Chul;Kang, Bo-seok;Kang, Hwan-Ku
Korean Journal of Poultry Science
/
v.48
no.1
/
pp.13-22
/
2021
The present experiment was conducted to evaluate the effect of stocking density on the growth performance, immune status, and meat quality of broilers. In total, 385 one-day-old Ross 308 broilers were randomly assigned to one of four distinct stocking densities: 26 birds/㎡, 22 birds/㎡, 19 birds/㎡, and 16 birds/㎡. They were fed the diet ad libitum for 5 weeks. Immunoglobulin (Ig) and corticosterone levels were evaluated, and growth performance, blood parameters, and breast meat quality were determined. It was observed that the weight gain and feed intake of growers (21~35 d) and broilers (0~35 d) were significantly reduced as the stocking density increased (P<0.05). However, the feed intake of starters (0~21 d) significantly increased as the stocking density increased (P<0.05). There were no significant differences in the biochemical profiles among the four different stock densities. Furthermore, no significant differences were observed in the stress parameters: (heterophils / lymphocytes ratio and corticosterone), IgA, and IgM; however, IgG significantly increased with stocking density (P<0.05). The pH, water holding capacity, and cooking loss of the muscle were all unaffected by the stocking density, but the shear force (tenderness) increased slightly as the density increased. The findings of this study suggest that a lower stocking density (16 birds/㎡) significantly improved the shear force of breast meat and IgG in broilers.
Chogak has been regarded as originating from the paintings decorating building elements. Various curved shape drawings that were first seen in the paintings of Goguryeo tomb murals evolved into the vine patterned Dancheong of Geuklakjeon in Bongjeongsa. Cheomcha of Geuklakjeon was chiseled with Yeonhwadusik relievo at the bottom on top of Dancheong, and this was the beginning of Cheomcha-Chogak. Also, Cheomcha, which was carved with a preliminary vine patterned Chogak in Daeungjeon in Bongjeongsa, opened the era of engraving Chogak directly on the surface of structural elements. Since then, vine patterned Chogak was a significant decoration technique for the Cheomcha of traditional wooden construction for a long time. Because Jeongjagak is a structure that was continuously built between the end of the Japanese invasion of Korea in 1592 and the late Joseon Dynasty, the transition of Cheomcha-Chogak over time can be seen through Jeongjagak architecture. The early Cheomcha-Chogak presents stems that climb up (Upbound-type) towards the headpiece on a column, while stems of Chogak later reversed direction to descend (Downbound-type) from the headpiece. This study examined the transition process and reasons for the change, with a focus on the findings above, and identified a new type of Chogak that is unrelated to the direction type and was adopted during the transition from Upbound-type to Downbound-type. The new type appeared when the Jeongjagaks for the Royal Tomb of Kyeongjo and those of the Injo were built, and it matches with the transitional period wherein lotus vanishes from Hwaban-Chogak. The study also inferred that the direction change of Cheomcha-Chogak stems was caused by the separation of vine patterned Chogak, carved with a two-stepped inner Ikgon, into both upward and downward from the headpiece, and this led to the changes that manifested as the inside of Choikgong being the Downbound-type Chogak and the variegated vine patterned Chogak of Choikgong affecting the direction of Cheomcha-Chogak. This is the follow-up study of "A Study on the Hwaban-Chogak of the Neungwon-Jeongjagak," a paper published in 2018, and is limited in n that Cheomcha, the focus of the research, is just one of the construction elements of Jeongjagak. The entirety ofChogak cannot be understood only by observing Cheomcha.
As the electric vehicle market grows, there is an issue of light weight vehicles to increase battery efficiency. Therefore, it is going to replace the battery module cover that protects the battery module of electric vehicles with high strength/high heat-resistant polymer composite material which has lighter weight from existing aluminum materials. It also aims to respond to the early electric vehicle market where technology changes quickly by combining 3D printing technology that is advantageous for small production of multiple varieties without restrictions on complex shapes. Based on the composite material mechanics, the critical length of glass fibers in short glass fiber (GF)/polycarbonate (PC) composite materials manufactured through extruder was derived as 453.87 ㎛, and the side feeding method was adopted to improve the residual fiber length from 365.87 ㎛ and to increase a dispersibility. Thus, the optimal properties of tensile strength 135 MPa and Young's modulus 7.8 MPa were implemented as GF/PC composite materials containing 30 wt% of GF. In addition, the filament extrusion conditions (temperature, extrusion speed) were optimized to meet the commercial filament specification of 1.75 mm thickness and 0.05 mm standard deviation. Through manufactured filaments, 3D printing process conditions (temperature, printing speed) were optimized by multi-optimization that minimize porosity, maximize tensile strength, and printing speed to increase the productivity. Through this procedure, tensile strength and elastic modulus were improved 11%, 56% respectively. Also, by post-processing, tensile strength and Young's modulus were improved 5%, 18% respectively. Lastly, using the FEA (finite element analysis) technique, the structure of the battery module cover was optimized to meet the mechanical shock test criteria of the electric vehicle battery module cover (ISO-12405), and it is satisfied the battery cover mechanical shock test while achieving 37% lighter weight compared to aluminum battery module cover. Based on this research, it is expected that 3D printing technology of polymer composite materials can be used in various fields in the future.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.