• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.18 no.1
• /
• pp.99-132
• /
• 1992

Polypeptide has been used broadly as an active ingredient in cosmetics We thought it is very important to investigate the adsorption behavior of polypeptide in order to pre-estimate the effect of these polypeptides. For the study of polypeptide adsorption, we have investigated complex formation of basic homopolypeptides, poly(L-proline) Form I [PLP(I)], Form II [PLP(II)] and poly(4-hydroxy-L-proline) (PHLP) with acidic homopolypeptides, poly(L-glutamic acid) (PLGA), poly(D-glutamic acid) (PDGA) and poly(L-aspartic acid) (PLAA) through hydrogen bonding in a hydroalcoholic medium with viscometer, 1ight scatter, pH meter and circular dicroism (CD). The polypeptides used in this study have helical structure in some conditions. The result exhibited that al 1 the complexes were formed as the composition of basic/acidic homopolypeptide : L:2 irrespective of the complex systems used. A more favorable complex is formed in the PLP(II)-PLGA system than PHLP-PLGA because PLP(II) has a more flexible helical conformation, whereas PHLP has a more rigid helical conformation. The right-handed helix PLGA formed the complex favorably and quickly with the left-handed helix PLP(II), whereas the left-handed helix PDGA formed the complex favorably with the right-handed helix PLP(I). The effect of side chain of the acidic homopolypeptides on the complexation was also studied. The result showed that more favorable condition for the complexation was PLGA-PLP(II) system which has longer side chain at acidic homopolypeptide than PLAA - PLP(II). All the above facts were well supported by CD measurement for the complex systems. By the CD spectra for the complexes we could deduce the conformational change of each homopolypeptide in the complexes On the basis of the above results, we performed the adsorption test of PLP(I, II) and PHLP on the hair having a left-handed helix. The adsorption amount of each polypeptide was analyzed by HPLC. The result showed that PLP(I) was adsorbed more than PLP(II), PLP(II) was adsorbed more than PHLP on the hair. On adsorbing polypeptides having a helical structure on the hair through hydrogen bonding, it could be concluded that the helical polypeptides having the opposite directional structure to the hair are adsorbed more than those having the same directional structure with the hair and also the polypeptides having a flexible conformation are adsorbed more than those having a rigid conformation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.2
• /
• pp.171-181
• /
• 2018

Genistein is one of the representative isoflavone compounds isolated from soybeans and has been studied very well for its anti-aging and anti-inflammatory activity through previous studies. However, although genistein exhibits high solubility in organic solvents, it shows low bioavaility due to the low water solubility. In this study, we compared directly the functional difference between genistein and genistein cyclodextrin complex which has the improved water solubility and stability by cell based assay. Cell cytotoxicity experiment were carried out on RAW264.7 with CCK-8 assay and cytotoxicity was appeared from $10{\mu}g/mL$, thereby maximum concentration was set to $10{\mu}g/mL$ in all condition. We discovered that genistein CD complex suppressed NO production and iNOS expression as concentration dependent manner in the condition of LPS rather than genistein. Also, we could understand that genistein CD complex was able to down-regulate mRNA expression of anti-inflammatory cytokines such as $IL1-{\alpha}$, $IL1-{\beta}$, IL-6, and $TNF-{\alpha}$ as concentration dependent manner in the presence of LPS. In addition, we verified that genistein CD complex increased TEER of HaCaT human keratinocyte cells as concentration dependent pattern and stimulated cell division and migration rather than genistein in cell migration assay. Thus, it is expected that it can be used as an effective cosmetic raw material for improving atopic dermatitis or skin barrier if clinical studies on skin regeneration and skin barrier of the genistein CD complex are carried out.

• Food Science and Preservation
• /
• v.15 no.3
• /
• pp.367-376
• /
• 2008

This study was conducted to investigate 1he quality characteristics of 1he soybean anchovy sauces added with medicinal herbs, Saururu chinensis Baill. and Houttuynia cordata Thunb. and fermented for 4 months. The total nitrogen content of 1he soybean anchovy sauce increased with the fermentation time showing the highest values in the sauce with Houttuynia cordata Thunb.. The contents of total sugar and reduced sugar were high in the order of the sauces with Houttuynia cordata Thunb.(sauce T), with Saururu chinensis Baill.(sauce B), and control. The content of salt decreased much more in the sauces with medicinal herbs. After 4 months of fermentation, pH was lowered from 5.86 to 5.27 in control, to 5.38 and 5.54 in sauce B and sauce T, respectively. Generally the total aerobic bacterial count increased until 3 months of fermentation and then decreased, and the addition of medicinal hems reduced the count especially showing apparent reduction in the sauce T. During the fermentation, total protease activity generally increased with the highest value in the sauce T. In the changes of nucleotides and their related compounds, the contents of AMP, ADP, and ATP were increased and hypoxanthine decreased during the fermentation, and IMP produced after 3 months. The soybean anchovy sauce B had 1he highest IMP and the lowest hypoxanthine after 4 months. The content of total amino acids increased showing 177.1 mg% and 134.7 mg% in the sauce B and sauce T respectively compared with 171.2 mg% of control. The contents of glutamic acid and aspartic acid were 29.2 mg% in sauce B and 34.3 mg% in sauce T, which were higher compared with 25.9 mg% of control. The fermented soybean anchovy sauce had 1he functionality of ACE inhibition with 70.5% (control), 72.5% (sauce B) and 81.6% (sauce T). In the results of sensory evaluation, the sance T scored the highest and the sauce B was preferred to control.

• The korean journal of orthodontics
• /
• v.32 no.5 s.94
• /
• pp.313-325
• /
• 2002

Three-dimensional CT imaging is efficient in examining specific structures in the craniofacial area by reproducing actual measurements through minimization of errors from patient movement and image magnification. Due to the rapid development of digital image technology and the expansion of treatment range a need for developing three -dimensional analysis has become urgent. Therefore the purpose of this study was to evaluate the percentage of error and magnification of three-dimensional CT using a dried skull and Vworks $program^{TM}$ (Cybermed Inc., Seoul, Korea) and also to obtain landmarks that are easy to designate and reproduce in three-dimensional images using the Vmorph-proto $program^{TM}$ (Cybermed Inc., Seoul, Korea). The following conclusions were obtained, 1. In the comparison of actual measurements from the dried skull and the three-dimensional image obtained from the Vworks program, the mean error was 0.99mm and the magnification was 1.04%. 2. Clinically useful hard tissue landmarks from three-dimensional images were Supraorbitale, Lateral orbital margin, Infraorbitale, Nasion, ANS, A point, Zygomaticomaxilla, Upper incisor, Lower incisor, B point, pogonion, Menton, PNS, Condylar inner margin, Condylar outer margin, Porion, Condylion, Gonionl, Gonion2, Gonion3, Sigmoid notch and Basion. 3. Clinically useful soft tissue landmarks from three-dimensional images were Endocanthion, Exocanthion, Soft tissue Nasion, Pronasale, Alare lateralis, Upper nostril point, Lower nostril point, Subnasale, Upper lip point, Cheilion, Stomion, Lower lip center, Soft tissue B, Pogonion, Menton and Preaurale. The Vworks program can be considered a clinically efficient tool to produce and measure three-dimensional images. Most of the hard and soft tissue landmarks proposed above are anatomically important points which are also easily reproducible and designated. These landmarks can be beneficial in three-dimensional diagnosis and the prediction of changes before and after surgery.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.6
• /
• pp.1-6
• /
• 2011

A transparent oxide thin film transistors (Transparent Oxide-TFT) have been fabricated by RF magnetron sputtering at room temperature using amorphous indium zinc oxide (a-IZO) as both of active channel and source/drain, gate electrodes and co-sputtered $HfO_2-Al_2O_3$ (HfAIO) as gate dielectric. In spite of its high dielectric constant > 20), $HfO_2$ has some drawbacks including high leakage current and rough surface morphologies originated from small energy band gap (5.31eV) and microcrystalline structure. In this work, the incorporation of $Al_2O_3$ into $HfO_2$ was obtained by co-sputtering of $HfO_2$ and $Al_2O_3$ without any intentional substrate heating and its structural and electrical properties were investigated by x-ray diffraction (XRD), atomic force microscopy (AFM) and spectroscopic ellipsometer (SE) analyses. The XRD studies confirmed that the microcrystalline structures of $HfO_2$ were transformed to amorphous structures of HfAIO. By AFM analysis, HfAIO films (0.490nm) were considerably smoother than $HfO_2$ films (2.979nm) due to their amorphous structure. The energy band gap ($E_g$) deduced by spectroscopic ellipsometer was increased from 5.17eV ($HfO_2$) to 5.42eV (HfAIO). The electrical performances of TFTs which are made of well-controlled active/electrode IZO materials and co-sputtered HfAIO dielectric material, exhibited a field effect mobility of more than $10cm^2/V{\cdot}s$, a threshold voltage of ~2 V, an $I_{on/off}$ ratio of > $10^5$, and a max on-current of > 2 mA.

• Korean Journal of Agricultural Science
• /
• v.19 no.1
• /
• pp.1-8
• /
• 1992

This experiment was conducted to improve the germination when we sowed Chinese milk vetch (Astragalus sinicus L. Local vas. Jinjoo) in the up-land.. The results are summerized as follows 1. There is no difference on the germination of Chinese milk vetch from $15^{\circ}C$ to $35^{\circ}C$. Germination ratio is 7l%, speed is 60% and mean of germinating day. is about 4. But at $10^{\circ}C$ germination ratio and speed are decreased as 65%, 8% but mean of germinating day is increased as 8. 2. Chemicals used for improve of germination $KNO_3$, $H_2SO_4$, HCl, NaOCl, NaOH and GA were increased about 6~8% of germination ratio. 3. Germination in response to soil covering up depth, surface sowing showed 68% of germination and not more than 4cm the seed is germinated 60% but not less than 6cm, germination ratio is not more than 50%. 4. Soil water content needed in the germination is proper about 70~80% of field water capacity and the ratio is 65% but not. more than 40% germination ratio is not more than 31%. 5. Germination in response to seed treatment (1 day sbsorption /1 day dry) germination ratio is not decreased when it treated 2 times but not less than 3 times it decreased seriously and not less that: 5 times it decreased not more than 31%. 6. Germination in response to seed largement, small seed is not good for germination, so seeds harvested after the majority of the seed is ripened.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.105-115
• /
• 2008

Statement of problem: Proper finishing and polishing enhance both the esthetics and the longevity of restored teeth. Blade finishing technique would be suited for smoothing and finishing. Evaluation of this technique are necessary. Purpose: The purpose of this study was to evaluate the blade finishing and polishing procedures on the surface profile and roughness of ormocer-based composite resin and nanohybrid composite resin. Material and methods: The material included a ormocer-based composite resin ($Admira^{(R)}$ & $Admira^{(R)}$ Flow); a nanohybrid composite resin ($Grandio^{(R)}$ & $Grandio^{(R)}$ Flow). One hundred forty specimens of each group were prepared using a mylar strip and randomly divied into blade finishing and rubber polishing groups (n=10). The average surface roughness (Ra) in micrometers was measured and the surface profile was examined by scanning electron microscopy (SEM) (Magnification ${\times}$ 200). The data were analyzed by Mann-Whitney Test at 0.05 significance level. Conclusion: The results of this study indicated that the mylar strip produced the smoothest surface on all materials and among the finishing-polishing methods was not significanct difference (P>0.05). Ormocer-based flowable composite resin performedthe lowest variability in initial surface roughness among the tested materials.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.2
• /
• pp.75-85
• /
• 2015

Purpose: The purpose of this study is to evaluate which FRC-posts were more distinguishable from core. Materials and Methods: Nine extracted single-rooted mandibular premolars with similar lengths (${\pm}0.5 mm$) and widths (${\pm}0.5 mm$) were endodontically treated and obturated. One specimen which the three roots were embedded in a cold mounting resin was made. 3 specimens were made by this method. Post spaces were prepared for the following post system: FRC $Postec^{(R)}$ Plus, MACRO-$LOCK^{TM}$ POST $ILLUSION^{TM}$ $XRO^{(R)}$, $Snowpost^{(R)}$. After three different posts were placed in the roots of a specimen, each three specimens received a direct core build-up: $Luxacore^{(R)}$ Dual A3, $Luxacore^{(R)}$ Dual blue, $Filtek^{TM}$ Z350 A1E. Digital images were taken of the post and core with and without air-blowing. We asked to fifty dentists and fifty dental college students which post was more clearly discriminated from the core. Results: In surveys, when core was $Luxacore^{(R)}$ Dual blue, among three types of posts people more easily discriminated the $Snowpost^{(R)}$ from core. When core was $Luxacore^{(R)}$ Dual A3, among three types of posts people similarly more easily discriminated $Snowpost^{(R)}$ from core. When core was $Filtek^{TM}$ Z350 A1E, among three types of posts people more easily discriminated distinguished MACRO-$LOCK^{TM}$ POST $ILLUSION^{TM}$ $XRO^{(R)}$ post from core. People more easily distinguished MACRO-$LOCK^{TM}$ POST $ILLUSION^{TM}$ $XRO^{(R)}$ post from core when temperature was lowered by air-blowing. Conclusion: Ability to discriminate between FRC-post and core is different according to color contrast. MACRO-$LOCK^{TM}$ POST $ILLUSION^{TM}$ $XRO^{(R)}$ posts are more discriminable when temperature is lowered by air-blowing.

• The Korean Journal of Mycology
• /
• v.1 no.1
• /
• pp.3-11
• /
• 1973

Four species of nematodes attacking mushroom beds were found in samples taken from 35 mushroom farms throughout Korea. These were Rhabditis sp., Aphelenchoides sp., Ditylenchus sp. and Aphelenchus sp. ,Rhabditis sp. was found from compost and casing from all mushroom farms and the frequencies of Aphelenchoides sp. was 31.4% in the both compost and casing. Both Ditylenchus sp. and Aphelenchus sp. showed 2.7% of frequencies in the compost, none in casing. Temperature and moisture content of compost affected pathogenicity of Aphelenchoides sp. on mushroom mycelia grown in compost. The higher temperature and moisture content the sooner the damage became apparent, and the more rapid was subsequent destruction of mycelia. There was no mycelial destruction at the lowest temperature of $10^{\circ}C$. Rhabditis sp. completely disintegrated mycelia grown in the compost, in the early stage, the numbers of Rhabditis sp. rose gradually and then increased suddenly to reach a peak but soon declined. At first, the pH of Rhabditis-infested spawned compost declined but then rose gradually as mycelia was disintegrated by nematodes. The trend in pH of infested unspawned compost was similar to those of uninfested, unspawned compost. Cultures inoculated with surface-disinfected dead Rhabditis sp. and with tap water used in the nematode extraction procedures showed no mycelial injury associated microorganisms containing within or outside the nematodes even though added by artificial wounding of the mycelia. Cultures artificially wounded showed no injury away from the wounds without the presence of living Rhabditis sp., such wounded mycelia slowly regenerated. On the other hand, artificial wounding accelerated the breakdown of mycelia in the presence of living Rhabditis sp.

• Korean Journal of Food Science and Technology
• /
• v.13 no.4
• /
• pp.314-318
• /
• 1981

In order to improve the storage stability of spray and freeze dried red ginseng extract powder packed in a bottle, the water vapor permeability of Al-foil laminate paper used for cap closure and shelf life of those products on various storage temperatures and relative humidities were investigated. The thickness of the laminate paper was $93{\pm}3\:{\mu}m$ and its physical properties were equal to standard of ASTM (B-377-66) The absorption rate of the freeze dried powder was 2-6 times greater than that of the spray dried powder at $37^{\circ}C$. Therefore it was considered that the laminate could be used for cap closures for the spray dried powder but unsuitable for the freeze dried powder. The shelf life of the spray dried powder was longer than that of the freeze-dried powder at $37^{\circ}C$.