• Journal of the Korea Organic Resources Recycling Association
• /
• v.5 no.1
• /
• pp.15-23
• /
• 1997

Commercial inocula and mature compost were added separately to food wastes in order to compare the inoculating effect on garbage decomposition. Among commercial inocula available in the market, GM (Green Microorganisms) and EM (Effective Microorganisms) were selected as test inocula. Garbage decompostion were evaluated in Volatile Solid (VS) reduction and FDA (Fluorescein DiAcetate) hydrolysis activity. VS reduction with mature compost experiment was higher than that with GM-added one. VS reduction rates were about 32% with mature compost and 27% with GM. When food wastes were treated with GM and EM based on the manufacturer's specifications, GM-added and EM-added food wastes showed only 8% and 9% of VS reduction respectively, which are much lower than those with the mature compost. FDA hydrolysis activity increased during the first 10 days of active composting periods for the composting experiments, while it decreased continuously for the experiments based on manufacturer's specifications.

• Korean Journal of Food Science and Technology
• /
• v.38 no.6
• /
• pp.767-772
• /
• 2006

In this study, we sought to produce a double layer microcapsule containing Lactobacillus sp. as the core material. The conditions for this microencapsulation process were optimized for the formation of a microcapsule with high storage stability. The effects of the ratio of[core material] to [wall material], the type and concentration of emulsifier used, the stirring rate(dispersibility) and the temperature of the dispersion fluid on the microencapsulation yield were studied. The optimal concentration and type of emulsifier required in order to allow for the stable formation of a W/O type emulsion (a primary process in double layer microencapsulation) were 1.00% (w/w) and polyglycerol polyricinileate (PGPR, HLB 0.6). However, the optimal concentration and type of emulsifier required to construct a W/O/W type emulsion (a secondary process in double layer microencapsulation), were 0.65% (w/w) and polyoxyethylene sorbitan monolaurate (PSML, HLB 16.7). Finally, we obtained a maximum yield of microencapsulation with a dispersion fluid stirring rate of 270rpm and a dispersion fluid temperature of 10$^{\circ}C$ after spraying a W/O/W type emulsion into the dispersion fluid.

• Korean Journal of Culture and Social Issue
• /
• v.24 no.3
• /
• pp.385-410
• /
• 2018

Materialistic values can be a important variable to understand Koreans' psychological well-being and mental health. This study aimed to validate the Korean version of the Material Values Scale (K-MVS)(Richins & Dawson, 1992). In study 1, we performed confirmatory factor analysis(CFA) to ascertain the three factor model of the original MVS using 417 Korean undergraduate student data(sample 1). The CFA confirmed the three-factor model of the MVS. Yet, three items that yielded low factor loadings in this study as well as in other MVS validation studies were excluded from the final model. In study 2, content, construct, and concurrent validity of the K-MVS were examined with 650 undergraduate student data(Sample 2). We also tested measurement invariance across two groups(i.e., college student group of Sample 2 and employee group of Sample 3). The result revealed that the three-factor model of the K-MVS hold true across the two groups. Lastly test-retest reliability was calculated with 408 female college student data(Sample 4) that filled out K-MVS twice within 6 months. These findings suggest that the K-MVS is a reliable and valid measure for assessing materialistic values in Korea.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.11
• /
• pp.720-728
• /
• 2012

In general, nonpoint pollutant of a watershed is drained out in the form of storm water runoff during rainfall events. As the bulk of the nonpoint pollutant is in adsorbed form on particulate matters, in order to understand the behavior of nonpoint pollutant it is essential to grasp the characteristics of particulate matters in rainfall runoff. Though, previous studies for the relationship between the runoff characteristics of pollutants and the size distribution of particulate matters are very rare. In this study, a small non-urbanized area (basin area of 52.8 ha) with various landuse types including paddy, dry fields and forest was selected and investigated in detail for the runoff properties of each pollutant during several rainfall events. The correlation and effects between particulate matters and nonpoint pollutant were analyzed quantitatively. As a result, the significant first flush was observed on each event and it became clear that fine particulate matters ($80{\mu}m$ or less) has contributed in the runoff process of nutrients and heavy metals. Organic matters ($BOD_5$, TOC), nutrients (TN, TP) and several heavy metals (Al, Cr, Cu, Fe, Hg and Zn) represented high correlations with SS (total), VSS, SS (d < $20{\mu}m$) and SS ($20{\mu}m$ $$\leq_-$$ d < $80{\mu}m$). On the other hand, $COD_{cr}$, Cd, Mn and Pb did not show clear correlations with the behavior of particulate matters. Therefore, we have to examine the introduction of nonpoint pollution mitigation facilities considering the facts that nonpoint pollutant runoff process has high correlation with the behavior of particulate matters and is changeable based on the target pollutants.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.333-334
• /
• 2003

자동차로 인한 대기오염은 규제물질 뿐만 아니라 많은 미량유해물질들에 크게 기여하고 있다. 이러한 자동차 배출가스들은 1차 대기오염물질로 배출되기도 하지만 그중 탄화수소나 질소산화물 등은 대기중 광산화반응을 거쳐 2차 오염물질 생성에 관여하여 더 심화된 대기질 저하에 기인하고 있다. 이처럼 자동차에서 배출되는 탄화수소류에 포함되어 있는 VOCs는 이러한 2차 오염물질로 생성되는 성분중 오존에 긴밀히 관여하여 인체 등에 미치는 영향이 크기 때문에 VOCs 저감을 위한 여러 가지 방안들이 고려되고 있다. (중략)

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.05a
• /
• pp.452-455
• /
• 2003

마이크로캡슐화 기술은 심물질, 캡슐의 벽재재료 및 후가공과 관련한 응용기술로 구성되어 있으며, 심물질로서는 다양한 종류의 기능성 물질을 적용할 수 있다. 벽막재료 또한 목적하는 마이크로캡슐의 용도에 따라서 고분자 물질이나 무기재료 등 적합한 재료를 쓸 수 있다. 이러한 기술을 통하여 심물질 자체의 단점들 예를 들면 열안정성, 광안전성, 분산성, 등을 대폭 개선할 수 있고, 또한 이 심물질의 이용시 가공방법의 한계 등을 보완할 수 있으며, 특히 서방성을 목적으로하는 경우에 적당한 가공방법이라고 할 수 있다.(중략)

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2007.05a
• /
• pp.48-50
• /
• 2007

본 연구에서는 기능성 의류소재로서 나노캡슐화 상전이 물질 처리 직물의 적합성을 평가를 위한 기초자료를 제시하고자 직물의 역학적 특성과 촉감 감성과의 관계에 대해 분석하였다. 분석결과, 면직물과 폴리에스테르직물에 모두 영향을 미치는 요인으로는 최대 하중시의 신장성, 전단강성, 표면마찰계수, 인장선형성, 두께 총 5가지로 나타났다. 이를 바탕으로 역학적 특성이 면직물과 폴리에스테르직물의 촉감 감성을 예측할 수 있는지 확인하기 위한 회귀분석 결과 두 직물 모두 R2가 0.7이상으로 예측력이 높게 나타난 것을 확인할 수 있었다.

• Proceedings of the KAIS Fall Conference
• /
• 2006.11a
• /
• pp.309-312
• /
• 2006

최근에는 산업의 발전에 따라 다종 다양한 형태의 중금속이 이용되고 있지만 처리공정의 효율상의 한계성 때문에 미량의 중금속이 배출되어 생태계의 치명적인 위협요소로 부각되고 있다. 중금속이 포함된 폐수는 일반적으로 여러 가지 방법이 있지만 생체물질을 이용한 생체흡착에 대한 연구 및 공정 개발이 활발히 이루어지고 있다. 생체흡착은 중금속이 생물체 표면이나 내부로 물리 화학 및 생물학적 상호작용에 의한 이온교환, 흡착등 다양한 기작에 의해 수용액으로부터 중금속이 제거되는 것이다. 본 연구에서 바실러스에 의한 EPS 물질을 추출하였으며 포자화 전과 후의 EPS를 이용하여 중금속제거 실험을 하였다. EPS 물질은 Protein이 Carbohydrate보다 많은 함량을 보였으며 중금속 제거는 포자화 전보다 포자화 후의 EPS가 더 많이 제거되는 것으로 나타났다.

• Journal of Radiation Protection and Research
• /
• v.15 no.2
• /
• pp.51-56
• /
• 1990

The dispersing model of radioactive plume in the atmosphere was assumed to form finite ellipseshaped volumes rather than a single plume and gamma absorbed doses from the plume were computed using the proposed model. The results obtained were compared with those computed by the Gaussian plume and the circular approximation models. The results computed by the proposed ellipse-shaped approximation model were close to those by the Gaussian plume model. and more accurate than those by the circular approximation model. The computing time for the proposed approximation model was one fortieth of that for the Gaussian plume model.

• Journal of the Korean Society of Radiology
• /
• v.11 no.6
• /
• pp.525-529
• /
• 2017

As a photoconductive material with a high X-ray sensitivity, many researches about mercury iodide has been carried out to substitute for amorphous selenium. However, it has many limitations in commercialization because of the high leakage current. In this study, we fabricated $HgI_2$ unit-cells with mixed silicon oxide($SiO_2$) and titanium oxide($TiO_2$) to reduce a high leakage current and we evaluated an electrical properties of the fabricated unit-cells. As a result, we confirmed that both mixtures were effective in reduing the leakage current of the $HgI_2$ and x-ray sensitivity were significantly increased in fabricated $HgI_2-TiO_2$ unit-cell.