• Title/Summary/Keyword: 물질의 입자성

Search Result 1,028, Processing Time 0.037 seconds

Analysis of Heterogeneous $CaCO_{3}-CaSO_{4}$ Single Particle using Ultra-thin Window EPMA (Ultra-thin Window EPMA를 이용한 $CaCO_{3}-CaSO_{4}$ 혼성의 단일 입자 분석)

  • ;;R. Van Grieken
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2000.11a
    • /
    • pp.87-90
    • /
    • 2000
  • 대기 중에 존재하는 화합물의 반응을 연구하는 것은 대기 오염 화합물의 이동이나 소멸, 환경에의 영향을 파악하기 위하여 긴요하다. 특히 입자상 물질과 기체상 화합물과의 반응을 명확히 이해하는 것은 대기 오염물질의 거동을 파악하는데 매우 중요하다. 입자상 물질을 분석하는 방법 중에 EPMA(Electron Probe X-ray Microanalysis)를 이용한 단일 입자 분석법(Single Particle Analysis)은 개개 입자의 형상과 크기 그리고 화학 조성에 대한 정보를 동시에 제공하기 때문에 개개 입자의 생성, 이동, 반응성, 소멸 그리고 환경에의 영향에 대한 자세한 정보를 얻을 수 있다. (중략)

  • PDF

Scenario Analysis of Dioxins Behaviors In Ulsan Bay of Korea using EMT-3D Model (EMT-3D 모델을 이용한 울산만 Dioxins 거동에 관한 시나리오 분석)

  • Kim, Dong-Myung
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.17 no.2
    • /
    • pp.89-96
    • /
    • 2011
  • A three dimensional ecological model(EMT-3D) was applied to Ulsan Bay for the simulation of Dioxins. The simulated results of dissolved Dioxins were in agreement with the observed values, with a correlation coefficient(R) of 0.7951 and a coefficient of determination($R^2$) of 0.6265. The results of sensitivity analysis showed that partition rate, adsorption rate and bioconcentration factor were important factors. Therefore, the parameters must be carefully considered in the modeling. In the case of 50% and 80% total loads reduction, concentration of dissolved Dioxins was shown to be lower than 0.150 and 0.250 pg WHD-TEQ/L, respectively.

$CaCO_3$/Poly Styrene를 이용한 무공해 혼합라텍스의 개발

  • 이선룡;강돈오;임재길;설수덕;이내우
    • Proceedings of the Korean Institute of Industrial Safety Conference
    • /
    • 2002.05a
    • /
    • pp.209-212
    • /
    • 2002
  • 유화중합을 이용한 복합입자는 입자의 내외부 모두가 2종류 이상의 고분자물질로 조성된 유기-유기형과, 무기질 입자를 고분자물질로 피복한 무기-유기형 복합입자로 대별된다. 무기질의 분체와 유기질 고분자로 이루어지는 분산계 복합재료도 현재 실용화 되고 있는 복합재료중의 하나이지만 무기질 분체는 유기고분자와 그 성질이 현저히 다르기 때문에 소재간의 친화성, 복합체에서 무기분체의 분산상태 등이 복합재료의 물성 결정에 중요한 요인이 된다.(중략)

  • PDF

Sol-gel 법을 이용한 ZnO-$TiO_2$ Core-shell 나노입자의 합성

  • Yang, Hui-Su;Nam, Sang-Hun;Jo, Sang-Jin;Jeong, Won-Seok;Bu, Jin-Hyo
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.08a
    • /
    • pp.366-366
    • /
    • 2011
  • 이성분 산화물인 ZnO/$TiO_2$ core-shell 나노입자는 core-shell 구조의 특성과 이성분 산화물의 상호작용에 의해서 염료감응형 태양전지의 효율향상을 기대할 수 있다. Znic acetate($Zn_2(CH_3COO)$)와 Titanium(IV) butoxide($Ti(OBu)_4$)를 이용하여 ZnO 나노입자를 수열합성하고 그 주의에 $TiO_2$을 가수분해 반응을 이용하여 둘러싸는 core-shell형태의 물질을 합성하였다. 그 이후 결정성 및 유기물 제거를 위해서 4시간 동안 고온에서 소성하였다. SEM 결과에 따르면 소성 온도를 600도까지 증가시키면 ZnO의 경우 나노입자의 크기가 증가하는 경향을 확인하였다. 하지만 core-shell의 경우는 ZnO의 뭉침현상을 $TiO_2$이 방해하여 초기합성된 크기와 동일한 크기를 유지하는 것을 확인하였다. 또한 XRD 결과에 따르면 주변에 형성된 $TiO_2$ 이외에 $Zn_2TiO_4$의 spinel 구조를 가지는 물질이 합성되는 것을 확인할 수 있었다. 합성된 core-shell 구조의 나노입자는 약 40~50 nm의 크기를 가지고 600도에서 소성된 입자의 경우 산소 정공이 거의 없는 약 3 eV의 밴드갭을 가지는 물질로 합성이 되었다. Core-shell 나노입자의 경우 염료 감응형 태양전지의 반도체 물질로 응용 가능할 것으로 판단된다.

  • PDF

고감도 화학물질 검출을 위한 대면적 Ag 코팅 고분자 나노기둥 SERS 활성 기판 제작

  • Im, Ha-Na;Kim, An-Na;Lee, Ho-Nyeon;Kim, Hyeon-Jong
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2018.06a
    • /
    • pp.92.1-92.1
    • /
    • 2018
  • 표면증강 라만 산란(Surface Enhancement Raman Scattering, SERS) 기판의 경우, 규칙적인 배열을 갖는 나노구조 및 나노패턴 기판과 금속 나노구조의 고밀도 패킹이 고감도 화학물질 검출에 중요하다. 또한 폭넓은 응용 가능성에도 불구하고 기판 제작의 비용이 높고 재현성이 떨어져 상용화에 어려움을 겪고 있다. 본 연구에서는 다공성 알루미나(Anodic Aluminum Oxide, AAO)를 사용하여 Ag 나노입자가 코팅된 나노기둥 배열(Nanopillar array)을 갖는 고분자 필름의 SERS-active 기판을 제작하여 공정비용을 낮추고, 대면적화로 생산성을 높이고자 한다. 다단계 양극산화 공정과 복제 기술을 통해 다양한 지름과 높이를 갖는 맥주병 형상의 나노기둥 배열을 제조하였고, aspect ratio가 2.3인 나노기둥 배열에서 최대의 SERS 신호 강도와 높은 재현성을 확인하였다. SERS 신호의 세기는 Ag 나노입자가 코팅된 나노기둥 배열의 열처리 온도와 분석 물질의 농도에 따라 비례하며 이를 바탕으로 정량적인 고감도 진단, 바이오 화학 물질 센서에 매우 적합함을 알 수 있다.

  • PDF

Seasonal Variation of the Quantity and Quality of Seston as Diet Available to Suspension-Feeders in Gosung and Kangjin Bays of Korea (고성만과 강진만에서 현탁물 섭식자에 유용한 입자물질 양과 질의 계절 변동)

  • LEE Pil-Yong;KANG Chang-Keun;CHOI Woo-Jeung;YANG Han-Seob
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.34 no.4
    • /
    • pp.340-347
    • /
    • 2001
  • Seasonal variation of the elemental and biochemical composition of the suspended particulate matter (SPM) was investigated in terms of quantity and quality of diets for suspension feeders from July 1999 to August 2000 in two coastal bay systems of Gosung and Kangjin Bays in Korea. No clear patterns in the seasonal variations of SPM concentration were found in these two bay systems. The results indicated that the seasonal variation of SPM could not be considered the variation of food available to suspension-feeders. The simultaneous peaks in chlorophyll a and biochemical components in summer indicated that the quantity of the particulate organic matter primarily depended on phytoplankton productivity. However, no correlation between chlorophyll a and biochemical components [particulate protein (PPr), carbohydrate (PCHO) and lipid] were found, indicating that other processes might also contribute to the particulate organic matter in the period when the phytoplankton biomass was low. High C: Chl a and C:N, and carbohydrate peaks during the autumn to spring period suggested that resuspension of surface sediments was a probable process to supply the particulate organic matter. The food material, represented by summing up the total quantity of three biochemical components, was highest in spring with minor peaks during the period from autumn to the next spring, The food index, calculated as the ratio of food material to total SPM, did not generally exceed $6\%$ with short peaks during the year. Therefore, nutritional quality of SPM in the bays are relatively poor than in other more productive coastal waters in the world. Our results confirm that the measurement of a single chemical variable cannot describe fully the nutritive value of the seston available to suspension-feeders as previously proposed, and the biochemical composition of SPM can provide effective information on its origin and nutritive Quality.

  • PDF

Antigenic localities in the tissues of Payagonimus westermani by developmental stages using immunogoldlabeling method (면역황금표식법을 이용한 폐흡충의 발육단계별 충체조직내 항원성 부위에 관한 연구)

  • 임한종;김수진
    • Parasites, Hosts and Diseases
    • /
    • v.30 no.1
    • /
    • pp.1-14
    • /
    • 1992
  • In order to observe the antigenic localization in the tissues of Paragonimus westermani of deve- lopmental stages, immunogoldlabeling method was applied using serum of the cats which were infected with isolated metacercariae from Cambaroides similis. The sectioned worm tissues from orch developmental stage were embedded in Lowicryl HM20 medium, stained with infected semi IgG and protein A gold complex(particle size: 12 nm) and observed by electron microscopy. In the young adult worm tissue of 4 weeks after infection with metacercariae, the gold particles were specifically concentrated on the tegumental syncytium and cytoplasm of the tegumental cells as well as the secretory granules in the parenchymal tissue. The antigenic materials in the adult worm tissue were specifically concentrated on the secretory granules in the parenchymal tissue, the cytoplasm between granules in the vitelline gland and the epithelial lamella in the lumen of the caecum.

  • PDF

Surface characteristics change of natural crystalline graphite powders by adsorption (유기물 흡착에 의한 인상흑연 분체의 표면특성변환 연구)

  • 김병곤;최상근;정헌생;이재장
    • Proceedings of the KSEEG Conference
    • /
    • 2001.04a
    • /
    • pp.308-310
    • /
    • 2001
  • 유기물질이 오랜 기간동안 고온 고압하에서 탄화작용을 받아 생성된 천연흑연은 단위구조가 탄소육각망평면(炭素六角網平面)이 평행하게 배열된 층상으로 전기전도도 및 윤할성이 우수하나 소수성이 매우 강하며 표변화학적 특성이 거의 없기 때문에 다른 물질과 표면흡착이 매우 어려운 물질이다. 따라서 본 연구에서는 흑연의 표면특성을 변화시키고자 유기물(ABDM)을 흡착시키고 표면흡착 매커니즘 및 표면특성을 해석하였다. 흑연 입자 표면 위의 ABDM흡착은 두 단계의 서로 다른 게에서 이루어졌다. 첫 번째 단계는 흡착 초기 흑연입자와 ABDM의 표면전위 특성차이에 의한 1차 흡착으로 흑연표면 소수성이 더욱 증가하는 상태이고, 두 번째 단계는 1차 흡착된 ABDM 과 용액중의 ABDM chain 상호간의 steric 작용에 의한 2차 흡착이었다. 2차 흡착이 완료된 흑연입자 표면은 ABDM 이중층을 형성하게 되고 이에 따라 흑연의 표면전위 특성을 변화시킬 수 있었다.

  • PDF

Investigations on High Temperature Filtration System for Particle Removal using Ceramic Candle Filter in the Pilot Scale Vitrification Plant (유리화 공정에서의 세라믹 캔들 필터를 이용한 분진 제거목적의 고온 여과 시스템에 관한 연구)

  • 류보현;박승철;황태원;하종현
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2003.05b
    • /
    • pp.391-392
    • /
    • 2003
  • 한전 원자력 환경기술원에서는 중ㆍ저준위 방사성폐기물 유리화 기술의 상용화 가능성을 입증하기 위한 유리화 실증설비를 건설하여 시험 중에 있으며 이 유리화 기술은 유도 가열식 저온로(Cold Crucible Melter, CCM)에 폐기물을 투입하는 기술로서 폐기물의 부피 축소 효과와 더불어 최종 고화물로 생성되는 폐기물의 침출율이 매우 낮은 장점을 지닌다. 이와 같은 유리화 공정은 기존의 소각처리에서와 같이 폐기물의 열적 산화과정에 의해 유해오염가스와 입자성 물질이 발생된다. 따라서 이를 처리하기 위해배기체 처리공정(Off Gas Treatment System, OGTS)을 설치하여 환경 배출기준(SO$_2$300ppm, NO$_2$ 200ppm, CO 600ppm, HCI 50ppm, 분진 100mg/Nm$^3$ 등)을 만족하도록 하였고 특히 입자성 물질은 후단 OGTS나 배관내 침적으로 인한 방사성 오염을 막기 위해 CCM 후단에서 효율적으로 제거되어야만 한다. (중략)

  • PDF