• Korean Journal of Remote Sensing
• /
• v.39 no.5_4
• /
• pp.1173-1183
• /
• 2023

Over the past 20 years, Korea's overall import and export cargo volume has increased at an average annual rate of approximately 5.3%. About 99% of the cargo is still being transported by sea. Due to recent increases in maritime cargo volume, congestion in maritime logistics has become challenging due to factors such as the COVID-19 pandemic and conflicts. Continuous monitoring of ports has become crucial. Various ground observation systems and Automatic Identification System (AIS) data have been utilized for monitoring ports and conducting numerous preliminary studies for the efficient operation of container terminals and cargo volume prediction. However, small and developing countries' ports face difficulties in monitoring due to environmental issues and aging infrastructure compared to large ports. Recently, with the increasing utility of artificial satellites, preliminary studies have been conducted using satellite imagery for continuous maritime cargo data collection and establishing ocean monitoring systems in vast and hard-to-reach areas. This study aims to visually detect ships docked at berths in the Busan New Port using high-resolution satellite imagery and quantitatively evaluate berth utilization rates. By utilizing high-resolution satellite imagery from Compact Advanced Satellite 500-1 (CAS500-1), Korea Multi-Purpose satellite-3 (KOMPSAT-3), PlanetScope, and Sentinel-2A, ships docked within the port berths were visually detected. The berth utilization rate was calculated using the total number of ships that could be docked at the berths. The results showed variations in berth utilization rates on June 2, 2022, with values of 0.67, 0.7, and 0.59, indicating fluctuations based on the time of satellite image capture. On June 3, 2022, the value remained at 0.7, signifying a consistent berth utilization rate despite changes in ship types. A higher berth utilization rate indicates active operations at the berth. This information can assist in basic planning for new ship operation schedules, as congested berths can lead to longer waiting times for ships in anchorages, potentially resulting in increased freight rates. The duration of operations at berths can vary from several hours to several days. The results of calculating changes in ships at berths based on differences in satellite image capture times, even with a time difference of 4 minutes and 49 seconds, demonstrated variations in ship presence. With short observation intervals and the utilization of high-resolution satellite imagery, continuous monitoring within ports can be achieved. Additionally, utilizing satellite imagery to monitor changes in ships at berths in minute increments could prove useful for small and developing country ports where harbor management is not well-established, offering valuable insights and solutions.

• The Korean Journal of Archival Studies
• /
• no.29
• /
• pp.175-223
• /
• 2011

A university is an organization charged with publicity and has accountability to the community for the operating process. Students account for a majority of members in a university. In universities, numerous creatures are pouring out every year and university students are major producers of these records. However, roles and functions of university students producing enormous amount of records as main agents of universities and focused concentration on produced records have not been made yet. It is reality that from the archival point of view, the importance of produced records of which main agents are university students has been relatively underestimated. In this background, this study attempted approach in archival point of view on records produced by university students, main agents. There are various types of records that university students produce such as records produced in the process of research and teaching as well as records produced in the process of various autonomy activities like clubs, students' associations. This study especially focused on university student autonomy activity process and placed emphasis on accountability securing measures on autonomy activity process of university students. To secure accountability of activities, records management should be based. Therefore, as a way to ensure accountability of unversity students autonomy activity, we tried to present records management systematization and records utilization measures. For this, a student body, a university student autonomy organization was analyzed and a student body of Myongji University Humanities Campus was selected as a specific target. First, to identify records management status, activities and organization and functions of the student body, we conducted an interview with the president of the student body. Through this, we analyzed the activities of the university student body and examined the necessity of accountability accordingly. Also, we derived the types and characteristics of records to be produced at each stage by analyzing the organization and functions of the student body of Myongji University. Like this, after deriving the types of production records according to the necessity, organization and functions of accountability and activities of the student body, we analyzed records management status of the present student body. First, to identify the general process status of activities of the student body, we analyzed activity process by stage of the student body of Myongji University. And we analyzed records management method of the student body and responsibility principal and conducted real condition analysis. Through this analysis, we presented the measures to ensure accountability of a university student body in three categories such as systematization of records management process, establishment of records management infrastructure, accountability guarantee measures. This study discussed accountability on society by analyzing activities and functions of a student body, targeting a student body, an autonomy organization of university students. And as a measure to secure accountability of a student body, we proposed a model for records management environment settlement. But in terms that a student body is an organization operated in one year basis, there is a limit that records management environment is hard to settle. This study pointed out this limit and was to provide clues when more active researches were carried out in the field of student records management in the future through presentation of student body records management model. Also, it is expected that the analysis results derived from this research will have significance in terms of school history arrangement and conservation.

• 대한공업교육학회지
• /
• v.42 no.2
• /
• pp.108-122
• /
• 2017

This research paper is to examine James Watt who led the 1st industrial revolution successfully. His great work was called monumental achievement in the human history of civilization. Here, we looked over the Watts' educational environment during his infant, juvenile, and adolescence period and also, his learning attitude about his own field through literature review. The basic infra of soft and hard wares for the industrial revolution through the process of R & D on new developing steam engine resulted from the very industrial revolution and its R & D environment were to be investigated. The useful information and knowledge from this process of the research are able to give an appropriate educational guidance to bring up the development of creativity in schooling systems. And also a lesson from the past could be used to provide the desirable direction for the 4th industrial revolution which is just begun to start now. The main results from this study are as follows; First, Watts' parents positively guided him onto the technology of manual field because they recognized their son was interested in technology field. The parents' attitude stimulated and guided his sons' self-development, had been equal to the aims of education. Second, Watt made a chance of making friendships with professors of Glasgow University. He spontaneously had done self-directed learning for getting knowledge and technology, and thus he became an expert of practical engineer and theorist. Third, the Lunar society, which was jumping over one's social position in their society of the 18th century through new thinking way, leading new ages had been very good R & D social infra for Watt to open and connect new advanced level of science and technology in his age. This society provided a study environment fields for their members to exchange their ideas of scientific curiosity and freely inquiry, technology informations. They had discussed and understood the issues to be occurred in their own fields and accumulated necessary knowledge for problem-solving, respectively. Such as this R & D system environment will be also considered in the modern research group. Fourth, the entrepreneur such as Boulton, who understand technology and grasp its value in future, is needed. The system of 'grue of management' will support the researcher with financial support, which is necessary in R & D. And the researcher like Watt who takes pleasure in technology itself and study eagerly in his field without financial problems, that is, 'grue of technical expert' is essential when leading to success in the industrial revolution.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.487-499
• /
• 2021

Purpose:The purpose of the paper is to review the problems of performance enhancement of safety certification standards and to suggest directions for improvement in order to rationalize safety certification standards for future industrial development and environmental changes. Method: The problems and limitations of the safety certification system are summarized through literature review and interview with manager, and the status of safety certification standards is classified into design standards, performance standards, and detailed standards, and the status analysis is performed. In addition, by synthesizing the results of the investigation and analysis, improvements are suggested to improve the performance of the safety certification standards. Result: Through the survey, the problems and limitations of safety certification could be grouped into six categories: government-led certification system operation, standardized certification standards, long time required to improve certification, poor certification standards preparation system, and lack of reflection of industry opinions. And, as a result of analyzing the certification standards by dividing them into performance and design standards, in the case of machinery, equipment, and protection devices, the design standards were high at 69.7% and 64.9%, whereas in the case of protective equipment, the performance standards were high at 61.1%. In order to improve the performance of safety certification standards centered on design standards, it is necessary to determine the possibility of performance enhancement of the certification standards and determine the feasibility of the inspection test method. In order to improve performance, it was reviewed that it was necessary to establish a systemic foundation and infrastructure, such as strengthening the Product Liability Act, systematizing market monitoring, etc., distributing certification test tasks, and participating in the preparation of certification standards by the private sector. Conclusion: Through this study, the problems and limitations of Korea's safety certification system were summarized and the necessity for performance improvement was reviewed. Performance improvement of safety certification standards is a matter that requires preparatory work, such as legislative revision and infrastructure construction, and requires mid-to-long-term promotion. In addition, rather than improving the overall safety certification standards, the performance requirements for each item subject to certification should be reviewed and promoted, and details should be specified through additional research.

• Journal of Wetlands Research
• /
• v.25 no.4
• /
• pp.274-283
• /
• 2023

Buffer zones, an example of nature-based solutions, offer wide range of environmental, social and economic benefits due to their multifunctionality when applied to watershed areas promoting blue-green connectivity. This study evaluated the effects of buffer zone application to the water quality of Yongdam reservoir tributaries. Particularly, the challenges and improvement of the buffer zone design were identified and suggested, respectively. Water and soil samples were collected from a total of six sites in Yongdam reservoir from September 2021 to April 2022. Water quality analyses revealed that among the sites monitored, downstream of Sangjeonmyeon Galhyeonri (SG_W_D2) was found to have the highest concentration for water quality parameters turbidity, total suspended solids (TSS), chemical oxygen demand (COD), total phosphorus (TP) and total nitrogen (TN). This finding was attributed to the algal bloom observed during the sampling conducted in September and October 2021. It was found through the soil analyses that high TN and TP concentrations were also observed in all the agricultural land uses implying that nutrient accumulation in agricultural areas are high. Highest TN concentration was found in the agricultural area of Jeongcheonmyeon Wolpyeongri (JW_S_A) followed by Jucheonmyeon Sinyangri (JS_S_A) while the lowest TN concentration was found in the original soil of Sangjeonmyeon Galhyeonri (SG_S_O). Among the types of buffer zones identified in this study, Type II-A, Type II-B and Type III were found to have blue-green connectivity. However, initially, blue-green connectivity in these buffer zone types were not considered leading to poor design and poor performance. As such, improvement in the design considering blue-green network and renovation must be considered to optimize the performance of these buffer zones. The findings in this study is useful for designing buffer zones in the future.

• Journal of Korea Water Resources Association
• /
• v.57 no.6
• /
• pp.421-435
• /
• 2024

In April 2023, a wildfire broke out in Gangneung located in the east coast region due to the influence of the Yanggang-local wind. In this study, GIS-based RUSLE(Revised Universal Soil Loss Equation) and SEMMA (Soil Erosion Model for Mountain Areas) were used to evaluate the erosion rate due to vegetation recovery in a small watershed of the Gangneung WUI(Wildland-Urban Interface) fire. The small watershed of WUI fire has a low altitude range of 10-30 m and the average slope of 10.0±7.4° which corresponds to a gentle slope. The soil texture was loamy sand with a high organic content and the deep soil depth. As herbaceous layer regenerated profusely in the gully after the wildfire, the NDVI (Normalized Difference Vegetation Index) reached a maximum of 0.55. Simulation results of erosion rates showed that RUSLE ranged from 0.07-94.9 t/ha/storm and SEMMA ranged from 0.24-83.6 t/ha/storm. RUSLE overestimated the average erosion rate by 1.19-1.48 times compared to SEMMA. The erosion rates were estimated to be high in the middle slope where burned pine trees were widely distributed and the slope was steep and to be relatively low in the hollow below the gully where herbaceous layer recovers rapidly. SEMMA showed a rapid increase in erosion sensitivity under at certain vegetation covers with NDVI below 0.25 (Ic = 0.35) on post-fire hillslopes. Gentle slopes with high organic content and rapid recovery of natural vegetation had relatively low erosion rate compared to steep slopes. As subsequent infrastructure and human damages due to sediment disaster by heavy rain is anticipated in WUI fire areas, the research results may be used as basic data for targeted management and decision making on the implementation of emergency treatment after the wildfire.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.421-435
• /
• 2017

Recently, due to the saturation of ground structures and the overpopulation of pipeline facilities requires to development of underground structures as an alternative to ground structures. Thus, mechanized tunnel construction of the shield TBM method has been increasing in order to prevent vibration and noise problems in construction of the NATM tunnel for the urban infrastructure construction. Tunnel construction plan for the tunnel line should be formed in a sharp curve to avoid building foundation and underground structures and it is inevitable to develop a shield TBM technology that suits the sharp curve tunnel construction. Therefore, this study is about the structural stability technology of the articulation jack, shield jack and skin plate for the shield TBM thrust in case of the mechanized tunnel construction that is a straight and sharp curve line. The construction case study and shield TBM operation principle are examined and analyzed by the theoretical approach. The torque of the cutter head, the thrust of the articulation jack and the shield jack, the amount of over cutting for curve is important respectively in shield TBM construction of straight and sharp curve line. In addition, it is very important to secure the stability of the skin plate structure to ensure the safety of the inside worker. This study examines the general structure and construction of the equipment, experimental simulation was carried out through numerical analysis to examine the main factors and structural stability of the skin plate structure. The structural stability of the skin plate was evaluated and optimizes the shape by comparing the loads of the articulation jack by selecting the virtual soil to be applied in a straight and sharp curve line construction. Since the present structure and operation method of the shield TBM type in domestic constructions are very similar, this study will help to develop the localized shield TBM technology for the new equipment and the vulnerability and stability review.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.26-27
• /
• 2018

With entry into force of the Nagoya Protocol to promote the fair sharing of the benefits of accessing and utilizing genetic resources, much support has been given to research on the development of biomaterials and products using domestic natural resources. Conservation and resource-saving of native species became very important through Nagoya Protocol enactment. The trend of cosmetic industry has been shifing from use synthetic chemicals to natural biomaterials, due to the safety regulations on new materials, ban on animal experiments, and expansion of cosmeceuticals range. In addition, functional cosmetic range has been expanded from whitening, wrinkle improvement, and ultraviolet shielding, to hair loss, hair loss alleviation, acne relaxation, and moisturizing of atopic skin, thus causing the activation of research about field of efficacy evaluation on natural biomaterials and commercialization. Chungbuk province is fostering the bio industry as a key industry for regional economic growth. For this purpose, Osong Biotechnology Complex/Ochang Science Industrial Complex in middle area, Jecheon biovalley in northern region, and Chungju Enterprise city have been established, thus playing a pivotal role in Bio innovative cluster in Korea. In particular, it was established the osong cosmetics clinical research support center to develop the cosmetics industry in chungbuk, thereby supporting clinical trials, efficacy evaluations, overseas certification, and overseas market entry in order to advance into the global market. In addition, oriental plants such as astragalus propinquus, schisandra chinensis, eucommia, alpiniae oxyphyllae fructus and biancaea sappan are being actively studied as global cosmetic ingredients through the promotion of various national research and development projects using natural materials in chungbuk province. The chungbuk natural product industry is expected to grow further throughout cosmetics industry development in the future, as companies and research institutes are actively promoting the secure index of effective material in natural products and effective material commercialization.

• The Korean Journal of Archival Studies
• /
• no.17
• /
• pp.247-292
• /
• 2008

Investigations have been started to set the modern history and national spirit to rights after Commissions were established. Those Commissions are established and operated with time limit to finish its own missions. They creates three kinds of records as acquired materials which acquired or are donated for investigation; investigation records as investigation reports; and administrative records that created while supporting organization's operation. The Commissions use more past records to do special tasks asnation's slate clean and uncovering the truth than other agencies. In other words, the commissions take the most advantages of well-managed records, however, their record management environment and operation systems are relatively loose than other permanent machineries. It has three reasons that; first, there is no record management regulations and criteria for machineries that have time limit. This affected each commissions 'systems and 6 Truth Commissions' record management systems are built separately and on the different level; Second, members lack responsibility from frequent sending, reinstatement, change, and restructuring and that makes troubles to produce and manage records; Third, central archives pay less attention to machineries that operated limited period as the truth commissions. The Commissions rather need more systematic control because its records have historical value. To solve these problems, record management regulations have to be prepared first with features of organizations running limited time and commissions' records as acquired materials or investigation records. Furthermore, building up standard record management system for the Commissions, standardizing transfer data, imposing professional record personnel, and setting limits frequent personnel changes would finish practical problems. Besides, those records created to reveal the truth should use for education and research because Truth Commissions are established to set unfortunate history right and not to repeat it again. The records would serve as steppingstone for establishment of the Truth Record Center that does education, information work, publication, and research with the records. The record center would help using the records efficiently and improving knowledge for its people. And, the center should devote people to recognize importance of the records.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.4
• /
• pp.47-60
• /
• 2021

Recently, as the occurrence frequency of sudden floods due to climate variability increased, the damage of aging chuteway slabs of spillway are on the rise. Accordingly, a wide array of field survey, hydraulic experiment and numerical simulation have been conducted to find the cause of damage on chuteway slabs. However, these studies generally reviewed the flow characteristics and distribution of pressure on chuteway slabs. Therefore the derivation of damage on chuteway slabs was relatively insufficient in the literature. In this study, the cavitation erosion and hydraulic jacking were assumed to be the causes of damage on chuteway slabs, and the phenomena were reproduced using 3D numerical models, FLOW-3D and COMSOL Multiphysics. In addition, the cavitation index was calculated and the von Mises stress by uplift pressure distribution was compared with tensile and bending strength of concrete to evaluate the possibility of cavitation erosion and hydraulic jacking. As a result of numerical simulation on cavitation erosion and hydraulic jacking under various flow conditions with complete opening gate, the cavitation index in the downstream of spillway was less than 0.3, and the von Mises stress on concrete was 4.6 to 5.0 MPa. When von Mises stress was compared with tensile and bending strength of concrete, the fatigue failure caused by continuous pressure fluctuation occurred on chuteway slabs. Therefore, the cavitation erosion and hydraulic jacking caused by high speed flow were one of the main causes of damage to the chuteway slabs in spillway. However, this study has limitations in that the various shape conditions of damage(cavity and crack) and flow conditions were not considered and Fluid-Structure Interaction (FSI) was not simulated. If these limitations are supplemented and reviewed, it is expected to derive more efficient utilization of the maintenance plan on spillway in the future.