• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.5
• /
• pp.595-602
• /
• 2007

This study was conducted to investigate on food component characteristics of seafood cooking drips (skipjack tuna cooking drip, octopus cooking drip and oyster cooking drip) as a source of functional seasoning. Heavy metal contents of seafood cooking drips were below food safety level. Among seafood cooking drips concentrated to 5 folds, the crude protein content was the highest (18.1%) in skipjack tuna cooking drip (SCD). The free amino acid content and taste value were higher in SCD than in other seafood cooking drips, and the major free amino acids were glutamic acid and aspartic acid. Total amino acid content of SCD was 16.2 g/100 mL and the major amino acids were glutamic acid (11.9%), proline (9.2%), glycine (9.1%) and histidine (11.5%). SCD in comparison with other seafood cooking drips showed the highest angiotensin I converting enzyme (ACE) inhibitory activity at $IC_{50}$ of 14.1 mg/mL. These results suggested that SCD could be used as a source of functional seasoning.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.5
• /
• pp.767-774
• /
• 2015

In recent decades, health concerns related to sodium intake have caused an increased demand for salt or sodium-reduced foods. Umami substance can enhance taste sensitivity to NaCl and may offer a unique approach to replace and reduce the sodium content in foods. In this study, hot water extraction conditions of Wando sea tangle with high umami taste were investigated. Wando sea tangle harvested in June was selected for hot water extraction based on its free amino acids composition. The quality properties of sea tangle extract were investigated at various extraction temperatures ($60^{\circ}C$, $80^{\circ}C$, and $100^{\circ}C$) and times (1 h, 2 h, and 3 h). Sea tangle extracts at the extraction temperature of $100^{\circ}C$ contained the highest soluble solids (35.47%~36.93%), and crude protein (3.75%~4.00%). Viscosities of sea tangle extracts decreased with increasing extraction temperature. Umami amino acids (glutamic acid and aspartic acid) and sensory characteristics were best at extraction conditions of $100^{\circ}C$ for 2 h. Saltiness enhancement of sea tangle extract powder was determined. Saltiness intensities of NaCl solution after adding 1% sea tangle extract powder were enhanced (1.84~4.25-fold). At the same saltiness intensity, sodium contents of NaCl solution with 1% sea tangle extract powder were 12.24~24.33% lower than that of NaCl solution. These results suggest that it is possible to reduce sodium in foods with sea tangle extract as a natural salt enhancer without lowering overall taste intensity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.53-64
• /
• 1973

The studies reported herein were conducted to investigate the effect of thermal conditions in double-cropping of rice. The accumulated daily mean and minimum air temperatures, for the period of the last 30 years, were examined at the 10 different meteorogical stations which are located in the southern part of Korea. The results obtained could be summarized as follows: 1. The first cropping. a. It seemed to be free from any frost-damage of rice at the seeding stage at Yeosu, Pusan and Cheju. However, it was found that there were some dangers of frost damage for about 30 to 40 day at Iri, Chonju and Kwangju, for 18 to 28 days at Daeku and Ulsan, and for 4 to 14 days at Mokpo and Pohang, respectively. b. The early critical transplanting date seemed to be from middle to late-April in the first cropping. As compared with the ordinary lowland seedlings, the semi-protected and upland ones could be planted 5 and 10 days earlier, respectively. c. The early critical heading date was about late-June and there were some low-temperature damages for 8 to 25 days at young-ear formation stage of rice plant, depending upon location. d. The early critical ripening date (the early critical transplanting date of the 2nd cropping) was from late-July to early-August. It took about 32 to 39 days in ripening. There was a tendency of SS${\fallingdotseq}$SL$15^{\circ}C$ (${\theta}$15) and the minimum of $10^{\circ}C$ (${\theta}$10), the ten locations could be devided into two ripening groups of ${\theta}$15>${\theta}$10 and ${\theta}$15<${\theta}$10. c. The late critical ripening date was around October 9 at Iri, Chonju, Kwangju and Daeku and around October 28 at Mokpo, Yeosu, Pusan and eheju. Three to four days were more required for a complete ripening of rice, as compared with the above dates. d. There was an overlap of about 12 to 42 days between the first and second cropping when early-maturing varieties requiring an accumulated mean air temperature of $1, 550^{\circ}C$, from transplanting to heading, were grown. Therefore, some varieties which could head with an accumulated daily mean air temperature of 1, 000 to $1, 200^{\circ}C$, should be either developed or some new cultural technology be established in order to have a successful double cropping in rice.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.4
• /
• pp.77-86
• /
• 2002

Surfactant enhanced in-situ soil flushing was performed to remediate the soil and groundwater at an oil contaminated site, where had been used as a military vehicle repair area for 40 years. A section from the contaminated site (4.5 m $\times$ 4.5 m $\times$ 6.0 m) was selected for the research, which was composed of heterogeneous sandy and silt-sandy soils with average $K_d$ of 2.0$\times$$10^{-4}$cm/sec. Two percent of sorbitan monooleate (POE 20) and 0.07% of iso-prophyl alcohol were mixed for the surfactant solution and 3 pore volumes of surfactant solution were injected to remove oil from the contaminated section. Four injection wells and two extraction wells were built in the section to flush surfactant solution. Water samples taken from extraction wells and the storage tank were analyzed on a gas-chromatography (GC) for TPH concentration in the effluent with different time. Five pore volumes of solution were extracted while TPH concentration in soil and groundwater at the section were below the Waste Water Discharge Limit (WWDL). The effluent TPH concentration from wells with only water flushing was below 10 ppm. However, the effluent concentration using surfactant solution flushing increased to 1751 ppm, which was more than 170 times compared with the concentration with only water flushing. Total 18.5 kg of oil (TPH) was removed from the soil and groundwater at the section. The concentration of heavy metals in the effluent solution also increased with the increase of TPH concentration, suggesting that the surfactant enhanced in-situ flushing be available to remove not only oil but heavy metals from contaminated sites. The removal efficiency of surfactant enhanced in-situ flushing was investigated at the real contaminated site in Korea. Results suggest that in-situ soil flushing could be a successful process to remediate contaminated sites distributed in Korea.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.1
• /
• pp.74-84
• /
• 2004

Purpose: Since I-125 emits low energy (27-35 keV) radiation, thinner crystal and collimator could be employed and, hence, it is favorable to obtain high quality images. The purpose of this study was to derive the optimized parameters of I-125 SPECT using a new simulation tool, GATE (Geant4 Application for Tomographic Emission). Materials and Methods: To validate the simulation method, gamma camera developed by Weisenberger et al. was modeled. Nal(T1) plate crystal was used and its thickness was determined by calculating detection efficiency. Spatial resolution and sensitivity curves were estimated by changing variable parameters for parallel-hole and pinhole collimator. Peformances of I-125 SPECT equipped with the optimal collimator were also estimated. Results: in the validation study, simulations were found to agree well with experimental measurements in spatial resolution (4%) and sensitivity (3%). In order to acquire 98% gamma ray detection efficiency, Nal(T1) thickness was determined to be 1 mm. Hole diameter (mm), length (mm) and shape were chosen to be 0.2:5:square and 0.5:10:hexagonal for high resolution (HR) and general purpose (GP) parallel-hole collimator, respectively. Hole diameter, channel height and acceptance angle of pinhole (PH) collimator were determined to be 0.25 mm, 0.1 mm and 90 degree. The spatial resolutions of reconstructed image of the I-125 SPECT employing HR:GP:PH were 1.2:1.7:0.8 mm. The sensitivities of HR:GP:PH were 39.7:71.9:5.5 cps/MBq. Conclusion: The optimal crystal and collimator parameters for I-125 Imaging were derived by simulation using GATE. The results indicate that excellent resolution and sensitivity imaging is feasible using I-125 SPECT.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.5
• /
• pp.777-784
• /
• 2016

This study aimed to evaluate the quality characteristics of wheat-Makgeolli (WM), a traditional Korean cereal alcoholic drink, using three varieties of wheat, namely Jokyoung (JK), Baegjoong (BJ) and Keumkang (KK). Samples of WM brewed from 100%, 85% and 70% milling rates of the three Korean wheat cultivars were analyzed for alcohol, pH, coloring degree, total acids, soluble solid, free sugars, and organic acids. As the milling rates in wheat decreased, total sugar content in WM increased while the pH of all samples decreased. The WM exhibited 0.95~1.27% in acidity, $10.2{\sim}12.5^{\circ}Brix$ in total sugar, and 14~16% in alcohol content. The most organic acids in WM was lactic acid, ranging in all the samples from 85.3~650.3 mg%. The results showed that BJ under a 70% milling rate had the highest reducing sugar contents and 15.97% in alcohol content. The carbohydrate content increased with the milling rate of wheat. Resulting in a positive correlation between carbohydrate content of wheat and total acids, reducing sugars (p<0.001), and alcohol content (p<0.05) in WM. Total sugar content is positively correlated with alcohol and reducing sugar content (p<0.001). Considering the yield, the milling rates will be adjusted to raw material prices.

• Applied Biological Chemistry
• /
• v.43 no.2
• /
• pp.86-94
• /
• 2000

In order to develop the enzymatic hydrolysis system concerned with taste and flavor, strains having the high hydrolyzing activity on the soy protein were selected from some traditional Mejus. Two molds and one bacterium producing enzymes which were different in character of hydrolysis were isolated and identified. Leucine and azodye enzyme activities of both M4 and M5 were relatively high among in the isolated molds. And, leucine enzyme activity of B16 was the lowest in the isolated bacteria. These strains were isolated as microorganisms having a dissimilar hydrolysis pattern on the soy protein by enzymatic reactions. Mold M4 on the culture solid media was mycelium colors of white and its sclerotia colors were changed from white to black. According to the result of slide culture, radial conidial head, subclavate vesicle, conidia of subglobose, stipes of uncolored with smooth walls and metula and phialides were existed. Because M4 was taxonomically similar to the characteristics of Aspergillus oryzae (ahlburg) species, M4 was identified and named as Aspergillus oryzae M4.Mold M5 showed white and black mycelium on the MEA medium. Mold M5 colony exhibited grayish-green color and have long(7 mm) sporangiophores at slide culture. Sporangia became brownish-gray and the wall of larger sporangia was broken to form small collars, and smaller sporangia were fomed continually from large basal membrane. Columella is globose and hyaline, and sporangiospores are ellipsoidal of small diameter$(80\;{\mu}m)$. Because M5 was taxonomically similar to the Mucor circinelloides of zygomycetes, M5 was was identified and named as Mucor circinelloides M5. Bacteria B16 colony was opaque white, circular and lobate, and had rod shaped endospore. B16 was found positive in stain, catalase, ${\beta}-glucosidse$ and V-P tests. B16 was found to utilize D-fructose, ${\alpha}-D-glucose$, maltose, D-mannose, D-raffinose, stachyose and sucrose. By the morphological and physiological results, the characteristics of B16 was thought to correspond to that of Bacillus megaterium. However, fatty acid composition was similar to Paenibacillus marcerans, requiring further study for the definite identification. Accordingly, Bacteria B16 was provisionally classified and named as Bacillus megaterium B16.

• Journal of the Korean association of regional geographers
• /
• v.2 no.1
• /
• pp.51-67
• /
• 1996

There are three main rice-growing regions in the United States: the prairie region along the Mississippi River Valley in eastern Arkansas; the Gulf Coast prairie region in southwestern Louisiana and southeastern Texas; and the Central Valley of California. The Central Valley of California is producing about 23% of the US rice(Fig. 1). In California. most of the crop has been produced in the Colusa, Sutter, Butte, Glenn Counties of the Sacramento Valley since 1912, when rice was commercially grown for the first time in the state(Fig. 2). Roughly speaking, the average annual area sown to rice in California is about 300,000 acres to 400,000 acres during the last forty years(Fig. 3). California rice is grown under a Mediterranean climate characterized by warm, dry, clear days, and a long growing season favorable to high photosynthetic rates and high rice yields. The average rice yield per acre is probably higher in California than in any other rice-growing regions of the world(Fig. 4). A dependable supply of irrigation water must be available for a successful rice culture. Most of the irrigation water for California rice comes from the winter rain and snow-fed reservoir of the Sierra Nevada mountain ranges. Less than 10 percent of rice irrigation water is pumped from wells in areas where surface water is not sufficient. It is also essential to have good surface drainage if maximum yields are to be produced. Rice production in California is highly mechanized, requiring only about four hours of labor per acre. Mechanization of rice culture in California includes laser-leveler technology, large tractors, self-propelled combines for harvesting, and aircraft for seeding, pest control, and some fertilization. The principal varieties grown in California are medium-grain japonica types with origins from the cooler rice climates of the northern latitudes (Table 1). Long-grain varieties grown in the American South are not well adapted to California's cooler environment. Nearly all the rice grown recently in California are improved into semidwarf varieties. Choice of variety depends on environment, planting date, quality desired, marketing, and harvesting scheduling. The Rice Experiment Station at Biggs is owned, financed, and administered by the rice industry. The station was established in 1912, as a direct result of the foresight and effort of Charles Edward Chambliss of the United States Department of Agriculture. Now, The station's major effort is the development of improved rice varieties for California.

• Korean Journal of Environmental Agriculture
• /
• v.5 no.1
• /
• pp.48-54
• /
• 1986

Because of the drastic development of nuclear industries, the contamination of natural environments by the disposal of radioactive materials which are released from nuclear facilities have aroused a considerable concern in relation to agricultural practices. Therefore the present investigation, through pot experiment, was performed to find out the aspect of the uptake of $Sr^{90}$ by rice plants and its distribution in them in five different types(physicochemical and minerallogical properties) of paddy soils. The results obtained were as follows; 1) Visual toxic symptoms on the growth of rice plant due to treatment of $Sr^{90}$ up to $40{\mu}Ci/10㎏$ in a pot were not observed even though uptake of $Sr^{90}$ by rice plant was proportionally increased with the $Sr^{90}$ treatment. 2) Distribution of $Sr^{90}$ in the rice plant was the highest in the leaves (84.5%) followed in the order by stems (13.5%) and rough grain (2.0%). The ratio of $Sr^{90}$ to Ca was higher in the leaves (872) and stems (667) than in the rice grain (89). 3) $Sr^{90}$ absorption in the rice plant ranged $0.15{\sim}0.30%$ at harvesting time. Uptake of $Sr^{90}$ by rice plants decreased by the increase of soil pH and exchangeable canons in the soils, but $Sr^{90}$ uptake increased when nitrogen, organic matter and clay content in soil was high, and uptake of this nuclide in the rice plant was higher with low Illite and Vermiculite content in the soils.

• The Journal of Engineering Geology
• /
• v.22 no.2
• /
• pp.145-155
• /
• 2012

The matric suction and volumetric water content of Jumunin standard sand with a relative density of 60% were measured using an Automated Soil-Water Characteristic Curve (SWCC) apparatus during both drying and wetting processes. The test time for the drying process was longer than that for the wetting process, because the flow of water is likely to be protected by air trapped in voids within the soils during the drying process. Based on the matric suction and volumetric water content, the SWCC was estimated using the model proposed by van Genuchten (1980). For the drying process, the unsaturated fitting parameters ${\alpha}$, n, and m were 0.399, 8.586, and 0.884, respectively; for the wetting process, the values were 0.548, 5.625, and 8.220, respectively. The hysteresis phenomenon occurred in the SWCCs, which means the SWCC of the drying process is not matched with the SWCC of the wetting process. Using these unsaturated parameters, we estimated the Suction Stress Characteristic Curve (SSCC), based on the relationship between suction stress and the effective degree of saturation. The suction stress showed a rapid decrease when the matric suction exceeds the Air Entry Value (AEV). Therefore, the effective stress of unsaturated soils is different from that of saturated soils when the matric suction exceeds the AEV. The suction stress of the drying process exceeds that of the wetting process for a given effective degree of saturation. The hysteresis phenomenon was also recognized in SSCCs. The hysteresis phenomenon of SSCCs arises from that of SWCCs, which is induced by the ink bottle effect and the contact angle effect. In the case of a sandy slope, the suction stress is positive and acts to enhance the slope stability as the water infiltrates the ground, but is negative when the suction stress exceeds the AEV. The results obtained for the wetting process should be applied in analyses of slope stability, because the process of water infiltration into ground is similar to the wetting process.