• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.209-218
• /
• 2012

Repeatability and reproducibility in solid weight and effective porosity measurements have been discussed using 8 core samples with different diameters, lengths, rock types, and effective porosities. Further, the effect of temperature on the effective porosity measurement has been discussed as well. Effective porosity of each sample has been measured 7 times with vacuum saturation method with vacuum pressure of 1 torr and vacuum time of 80 minutes. Firstly, effective porosity of each sample is measured one by one, so that it can provide a reference value. Then for reproducibility check, effective porosity measurements with vacuum saturation of 2, 4, and 8 samples simultaneously have been performed. And finally, repeated measurements for 3 times for each sample are made for repeatability check. Average deviation from the reference set in solid weight showed 0.00 $g/cm^3$, which means perfect repeatability and reproducibility. For effective porosity, average deviations are less than 0.07% and 0.05% in repeatability and reproducibility test sets, respectively, which are in good agreement too. Most of porosities measured in reproducibility test lies within the deviation range in repeatability test sets. Thus, simultaneous vacuum saturation of several samples has little impact on the effective porosity measurement when high vacuum pressure of 1 torr is used. Air temperature can cause errors on submerged weight read and even effective porosity, because it is closely related to the temperature, density, and buoyancy of water. Consequently, for accurate measurement of effective porosity in a laboratory, efforts for maintaining air or water temperature constant during the experiment, or a temperature correction from other information are needed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.4
• /
• pp.23-30
• /
• 2005

The Hygrothermal aging of the laminates of $Avimid^(R)$ K3B/IM7 in $80^{\circ}C$ water was studied as a function of immersion time prior to forming microcracks. The factors causing the $80^{\circ}C$ water to degradation of the laminates could be the degradation of the matrix toughness, the change in residual stresses or the interfacial damage between the fiber and the matrix. The times to saturation in $80^{\circ}C$ water for the laminates and for the neat resin were 100 hours and 500 hours. After 500 hours aging of the neat resin, the glass transition temperature was changed less than 1% by DSC test, and the weight gain was 1.55% increase with the diffusion coefficient $7\times10^{-6}m/s^2$ and the fracture toughness was decreased about 41%. After 100 hours fully saturated aging of the ${[+45/0/-45/90]}_s$ K3B/IM7 laminates in $80^{\circ}C$ water, the weight gain was 0.41% increase with the diffusion coefficient $1\times10^{-6}m/s^2$. In 100 hours, the loss of the fracture toughness of the laminates was 43.8% of the original toughness by the microcracking fracture toughness criterion. Therefore, the main factor to degrade the microcracking toughness of the laminates could be the degradation of the matrix fracture toughness.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.31-34
• /
• 2005

Hygrothermal aging of the laminates of $Avimid^{R}$ K3B/IM7 in $80^{\circ}C$ water was studied as a function of immersion time prior to forming microcracks. The factors causing the $80^{\circ}C$ water to degradation of the laminates could be the degradation of the matrix toughness, change in residual stresses or interfacial damage between the fiber and matrix. The times to saturation in $80^{\circ}C$ water for the laminates and the neat resin are 100 hours and 500 hours. After 500 hours aging of the neat resin in $80^{\circ}C$ water, the glass transition temperature was changed less than $1\%$ by DSC test and the weight gain was $1.55\%$ increase. After 500 hours aging, the fracture toughness of the neat resin was decreased about $37\%$ by 3-point bending test. After 100 hours aging of the [+45/0/-45/90]s K3B/IM7 laminates in $80^{\circ}C$ water, the weight gain was $0.41\%$ increase. The $80^{\circ}C$ water diffusion rate into the neat resin was faster than into the laminates. In 100 hours, the loss of the microcracking toughness of the laminates was $28\%$ of the original toughness by our own microcracking fracture toughness criterion.

• Journal of Science Education
• /
• v.36 no.2
• /
• pp.369-380
• /
• 2012

The purpose of this study was to investigate middle students' conceptions of buoyancy. The questionnaires composed of 9 items which asked the reasons for situations with buoyancy; recognized of buoyancy, the facts affecting buoyancy(bottom of the Area of the object, the shape of the object, the depth of the object in the water, amount of water, the degree of the object submerged in the water, volume of the object, weigh of the object), the relationship between the amount of replaced fluid and buoyancy. The subjects were 140 students from the Busan Area who answered questionnaires composed of 9 items which asked the reasons for situations with buoyancy. Among the 140, 132 students were selected who answered all of question in the test. The students' answer types were follow: 1. Related to the shape of the submerged object, students answered that buoynacy depended on the bottom dimensions or the surface area of the object. 2. Students confused press, water press and buoyancy, who answered buoyancy was great when the water press was great. 3. Students answered that the weight and the size of the buoyancy of the object was same in the water. 4. Students answered, gravity was smaller in the water. Students recognized the existence of buoyancy but the reason of the answer depend on their experience. Also students answered using the words that water pressure, pressure, force instead of buoyancy. Students didn't understand the factors affecting the buoyancy. Many students responded that buoyancy was changed depend on weight of object, sinking depth, shape and others. It was considered that these responses didn't understand the cause of buoyancy.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.842-846
• /
• 2016

It's possible for a human to breathe under water, but the amount of dissolved oxygen in the water is small and a large amount of water is necessary to obtain sufficient dissolved oxygen from water. So, large separation system with large water pumps, having large surface areas, and large battery sources are needed. Exhalation gases are used to solve this problem. Theses gases contain some oxygen, nitrogen, and carbon dioxide; they contain less oxygen and more carbon dioxide compared to air. Therefore, reduction of the amount of carbon dioxide is necessary. If exhalation gases are employed appropriately, the separation device can be made more compact. Inlet water mixed with exhalation gases is supplied into the separation device, and dissolved gases are separated from the mixed water as it passes through the device. The inlet part of a typical separation system with a water delivery pump before the membrane module has more than one atmosphere. Hence, a compressor is used to mix the exhalation gases. In this study, the pressure at the inlet due to the use of a suction pump after the membrane module was less than one atmosphere; hence, compressors were not required. Separation characteristics were studied using a separation device without a compressor. The use of exhalation gases led to an increase in the amount of dissolved gases being separated. As the amount of inlet exhalation gases was increased, the separation of dissolved gases was increased as well.

• Journal of Korean Elementary Science Education
• /
• v.26 no.2
• /
• pp.226-241
• /
• 2007

The purpose of this study was to elucidate elementary school teachers' pedagogical content knowledge regarding the subject of "weight and pressure in water". 6 elementary teachers in charge of the 6th grade were selected for this study. The 7 hour lessons were observed over $15{\sim}20$ days, and a variety of data including scenarios, questionnaires for teachers, interviews of teachers were analyzed. As a result of this study, teachers who had long career histories thought that the purpose of teaching science was to teach the use of science principles, and teachers who had only taught for a relatively short time thought the purpose was satisfying students' curiosity. Most of the teachers felt that the science content knowledge related to buoyancy was insufficient. They had acquired most of the science content knowledge from teaming experiences in middle and high schools. The pre-service teacher education programs didn't help them to satisfactorily acquire the science content knowledge under analysis here. Most of the teachers taught the science lessons according to the order of sequence as shown in the science textbook. They didn't teach the contents that they thought were needed if they were not already included in the science textbook. Only one teacher who had taken science courses in high school managed the science classes freely according to his own thoughts and opinions. From the results of this research, it could be concluded that most elementary school teachers did not have enough pedagogical content knowledge to teach their students effectively.

• The Journal of Natural Sciences
• /
• v.15 no.1
• /
• pp.11-34
• /
• 2005

It is no exaggeration to say that the productivity of a research using computer simulations on complex molecular systems like biomolecules depends on the ability of the sampling algorithm to explore the relevant parts of configuration space. In this study, we investigate the properties on the mutiensemble sampling (MES) which is one of the solutions that surmount limitations of conventional sampling algorithms. Works for finding out practical systematic ways of using the MES efficiently to explore distantly separated regions in configuration space are performed. In this work, the more generalized form of weighting function for MES is used and 'cavity formation in water' is simulated using Monte Carlo. investigating the correlation of simulation parameters and the efficiency of the method, we propose a practical way of maximizing the power of the MES. We applied the way to 'cavity formation in water' and were able to explore the parts of configuration space relevant to cavities of radius from 0 to 5.6A in a single simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.355-362
• /
• 2016

The pipe material is selected according to the physical and chemical properties of the fluid flowing within it. Because the fluid used in fire extinguish systems is water, the various foreign substances dissolved in it cause scale to form on the pipe wall and accelerate the corrosion and aging of the pipe itself. This results in an increase in the friction loss and eventually degrades the efficiency of the pump. The use of CPVC (Chlorinated Poly-Vinyl Chloride) pipes was confirmed to reduce the friction loss compared to conventional steel pipes in the design and construction stages. The friction loss was found to be 76.64MPa with a C-value of 120 for the steel pipe and 50.72 MPa with a C-value of 150 for the CPVC pipe in an actual apartment construction environment. It was confirmed that the friction loss was improved by about 34% when using the CPVC pipe. When the steel and CPVC pipes were employed in the construction, the construction costs were 1,585,158 and 931,842 won, respectively. Therefore, it was shown that the construction cost was reduced by about 41%. We investigated the safety of the fire extinguishing system and the improvement in the economic performance due to the reduction in the total installed capacity by studying practical applications in the field.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.7
• /
• pp.1102-1107
• /
• 2003

To study the effects of substances in paeonia seeds (Paeonia lactiflora Pall.) on lipid metabolism, crude methanol extract and secondary ether-soluble fraction out of defatted methanol extract and trans-resveratrol were prepared from the seeds and added to 0.5% (w/w) cholesterol diets for rats. Male Sprague-Dawley rats weighing 120$\pm$11 g were divided into six experimental groups: control group with no extra supplement, 0.1% (MP1) and 0.2% methanol extract (MP2) supplemented groups, 0.05% (EP1) and 0.1% ether-soluble fraction (EP2) supplemented groups and 0.02% resveratrol supplemented group. Experimental diets were fed ad libitum to the rats for 3 weeks. Body weight gains and food efficiencies were not different among the six experimental groups. Relative liver weights were lower in EP2 group compared to those in control group, but serum GOT and GPT levels of paeonia seed groups including trans-resveratrol group were not different from those of the control group. Serum total cholesterol levels reduced in EP2 and resveratrol groups but HDL-/total cholesterol ratios significantly increased in the four paeonia groups except EP1 group compared with the control group and serum triglyceride level lowered only in EP2 group than that of the control. However, liver cholesterol levels lowered in the five paeonia groups but triglyceride level lowered in MP2, EP1, EP2 groups than that of the control group. Fecal cholesterol excretion significantly increased in MP2, EP1, and EP2 groups than that of the control group, but bile acid excretions were not changed except that a reduction in EP2 group. These results suggest that paeonia seeds contain substances improving serum lipid status mostly via HDL pathway and resveratrol as monomer is one of the effective components but others including resveratrol oligmer are involved in the lipid improving effect.

• Korean Journal of Weed Science
• /
• v.14 no.2
• /
• pp.120-127
• /
• 1994

To establish an efficient herbicide screening method for purple nutsedge(Cyperus rotundus) control, its sprouting characteristics, tuber production and responses on several herbicides were investigated under greenhouse condition. The tubers stored at $4^{\circ}C$ after sterilization with the diluted prochloraz(Spotac) solution showed higher sprouting than the non-sterilized did. The harvested tubers were not dormant, and the sterilized tubers which stored at low temperature had a sprouting capability of about 80% after 6 months. If the fresh weight of purple nutsedge tubers was decreased to below 48%, they could not sprout. However, the tubers soaked in water and then stored at low temperature could sprout by 88% even 6 months later. Sprouting and initial growth of tuber were much better at $35^{\circ}C$-day/$25^{\circ}C$-night than at 30/$20^{\circ}C$ or 25/$15^{\circ}C$. The half-sected tubers, which were prepared by setting the intact tuber of above 1.2g latitudinally, were shown similar initial growth to the intact but those sected crucifically were not. These results suggest that the half-sected tuber itself can be used as a material on herbicide screening. About 1000 tubers could be harvested when 10 tubers planted in a pot($56{\times}35{\times}16cm$) filled with the artificial soil were cultivated in greenhouse of $35^{\circ}C$-day/$25^{\circ}C$-night for 3 months(April-July, 1993). Chlorimuron, Bentazon and Norflurazon were selected as the standards for the screening because of providing relatively effective control on purple nutsedge in both soil-surface and foliar spray treatment.