• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.139.1-139.1
• /
• 2015

열플라즈마 토치 및 자유연소아크 시스템 개발이 증가함에 따라 실험을 통해 얻기 어려운 물리적 특성들을 파악하기 위해 전산유체역학을 이용한 해석방법이 널리 이용되어 왔다. 대부분의 경우에 해석의 용이성을 위하여 2차원 축대칭으로 가정하여 계산을 수행하지만, 2차원 해석만으로는 실제 물리적인 현상을 정확하게 반영하기 힘들다. 따라서 보다 실질적인 결과를 얻기 위해서는 기존의 2차원 해석방법을 3차원 해석방법으로 변환할 필요성이 있다. 본 논문에서는 3차원 열플라즈마 해석을 위한 첫 단계로써 상용 CFD 프로그램인 ANSYS CFX를 사용하여 동일한 해석모델에 관하여 2차원 해석과 3차원 해석을 수행하였다. 해석방법 및 결과의 타당성을 평가하기 위하여 Schnick-Fuessel 모델 (SF 모델)과 Haddad-Farmer 모델 (HF 모델)을 선정하여 각각의 모델에 대한 해석결과를 문헌에서 발췌한 실험결과 등과 비교하였다. 이러한 결과 비교를 통해서 본 연구에서 적용한 열플라즈마 해석에 관한 수치해석 방법이 충분히 3차원 해석으로 확장 가능함을 확인할 수 있었다.

• Journal of Radiation Protection and Research
• /
• v.17 no.1
• /
• pp.31-41
• /
• 1992

A study for the evaluation of selected filter media that need further characterization particularily in the context of alpha measurements of radon progeny has been carried out by investigating physical characteristics and using the alpha spectroscopy. Physical characteristics was investigated by electrostatic charging and mechanical strength of filters, and then pressure drop before and after sampling was tested. Alpha spectroscopy was used to analyze the energy spectra from the deposition of radon progeny into filters. The results of the assessment showed that the newer filter types do not have a great advantage over the 'old standard' Millipore type AA. But Metricel DM-800 is recommended for those situations where electrostatic charging is a problem. Also this method will be used more effective for the evaluation of new developing filters in future.

• Tunnel and Underground Space
• /
• v.19 no.4
• /
• pp.287-303
• /
• 2009

Rock mass in Baekrokdam at the summit of Hallasan in Jeju island is composed of two volcanic rock types: Baekrokdam trachybasalt at the eastern region and Hallasan trachyte at the western region. On-going rockfall and subsequent collapse of Baekrokdam wall rock are closely linked to the weathering of trachyte distributed in the western region of Baekrokdam. Samples of Hallasan trachyte showing different weathering grades had been collected and the polarizing microscopic observation, X-ray diffraction analysis and analysis for chemical weathering had been conducted. Formation of secondary minerals, especially clay minerals, by chemical weathering has not been identified, but the change of chemical weathering indices indicated that chemical weathering process had been proceeded to the degree for increasing and decreasing the contents of some chemical components. Changes in physical and mechanical rock properties due to weathering has also been examined. Artificial weathering test of freezing-thawing reveals that the process of crack initiation and propagation deteriorated the mechanical characteristics of Hallasan trachyte and $D_B$ = 1.5 or porosity = $20{\sim}21%$ would be the ultimate limiting value induced by the mechanical weathering processes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.397-397
• /
• 2020

가뭄을 전망하는 방법으로는 통계적 방법과 물리적 방법으로 구분할 수 있다. 통계적 방법은 과거의 기상 및 수문현상이 미래에도 재현될 수 있다는 전제하에 미래 가뭄상황을 전망하는 방법이다. 그러나 이 방법은 예측된 결과들이 모두 과거의 경향에 국한됨에 따라 최근에 급변하는 수문기상의 특성을 고려하는데 한계가 있다(Trenberth, 1994). 물리적 방법은 주어진 초기 수문기상조건으로부터 역학적 알고리즘이 탑재된 기상 및 수문모형의 연계모의를 통하여 미래 가뭄을 전망하는 방법으로 모형에 따른 불확실성이 발생할 수 있으나 최근 수문순환의 변화를 예측가능하다는 장점이 있어 활용도가 높다. 본 연구에서는 기상예보자료와 지표수문모형을 연계한 물리적 기반의 수문학적 가뭄전망정보를 산정하고, 활용성을 평가하였다. 기상예보자료는 기상청 현업예보 모델인 GloSea5로부터 생산된 자료를 이용하였으며, 수문학적 가뭄전망을 위해 MSWSI (Modified Surface Water Supply Index)를 활용하였다. 수문학적 가뭄전망정보는 현재의 수문조건이 지속된다는 가정하에 예보선행시간 3개월까지 산정하였다. 2015~16년 기간에 중권역별 가뭄전망정보를 산정하였으며, 전망정보의 예측성은 통계분석을 이용하여 정량적으로 평가하였다. 금회 제시한 연구방법은 현재의 수문조건이 지속될 시 기상예보에 따른 중권역별 수문학적 가뭄을 예측할 수 있다는 점에서 활용성이 높을 것으로 판단된다.

• Explosives and Blasting
• /
• v.15 no.1
• /
• pp.44-60
• /
• 1997

The design of underground cavern is basically governed by the mechanical properties of ground mass distributed around excavation. It is seldom possible to consider all the factors of ground mass properties in the evaluation of ground mass behavior as well as to classify those factors to a simple category. Until computer sciences have developed to calculate complex and laborious mechanical simulation of underground openings, ground behavior was quantitatively and qualitatively evaluated using empirical classification system. In this paper, analysis methods of ground behavior for underground cavern using the prediction of loosening zone, empirical method derived from rock mass classification and element stress analysis are described with chronological sequence.

• The Journal of Engineering Geology
• /
• v.1 no.1
• /
• pp.38-53
• /
• 1991

The design of underground cavern is basically governed by the mechanical properties of ground mass distributed around excavation. It is seldom possible to consider all the factors of ground mass properties in the evaluation of ground mass behavior as well as to classify those factors to a simple category. Until computer sciences have developed to calculate complex and laborious mechanical simulation of underground openings, ground behavior was quantitatively and qualitatively evaluated using empirical classification system. In this paper, analysis methods of ground behavior for underground cavern using the prediction of loosening zone, empirical method derived from rock mass classification and element stress analysis are described with chronological sequence.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.10
• /
• pp.15-24
• /
• 2010

In the case of underground power utilities pipe such as circular pipe, the most difficult problem is low compaction efficiency of the bottom of pipe inducing the failure of utilities. To overcome this problem, various studies have been performed and one of these is CLSM(Controlled Low Strength Materials) accelerated flow ability. But underground power utilities pipe backfill materials is also needed to have good thermal property that can dissipate the heat as rapidly as it is generated. So, in this study, we performed thermal resistancy test for various materials such as sand, weathered soil, clay and mixed soil to analyze the thermal characteristics of CLSM(Controlled Low Strength Materials) with accelerated flow ability for various conditions(water content, unit weight, void ratio, curing time) and to evaluate the applicability for backfill material of underground power utilities pipe. The test results of 16 specimens for thermal resistancy test showed good thermal property that maintained below $85^{\circ}C\;cm/W$.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.8-16
• /
• 2005

Fire-killed trees of Korean red pine are valuable resources for industrial uses. It is common only believed that fire-killed trees are too weak and brittle to use in construction purposes. The misunderstandings of fire-killed trees lead these valuable resources abandonment. The purposes of this research are focused on scrutinization of material properties of fire-killed trees to facilitate industrial uses of these resources. The sample logs were collected from the forest fire site of the eastern coast area in which the most catastrophic wild fire had taken place in 2000. Fire-killed Korean red pines were classified into 3 levels by the degree of fire damage so called light, medium and heavy, then their physical, mechanical and chemical properties were compared with sound trees. No significant difference in physical appearances were found in the cross sections by degree of damage compared to sound tree but bark char. Investigation on mechanical and chemical properties indicates that forest fire did not impact significantly in lowering the strength of damaged trees. It was concluded that there was any limitation of forest fire-killed trees of Korean red pine in industrial utilization.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.3
• /
• pp.429-439
• /
• 2000

This study was aimed to investigate the handle and mechanical properties of silk woven fabrics according to the fabric structure and yarn types 56 male and female students evaluated 16 black specimens with semantic differential scale of 20 hand adjectives. Mechanical parameters such as surface properties, bending properties and compression properties were tested using by KES-FS system. Data were analyzed through factor analysis, pearson correlation coefficient and t-test using PC SAS package. The results were as follows: The hand adjectives were grouped as 4 'surface roughness', 'flexibility', ;sense of thermal', and 'dryness'. 'Surface roughness' was highly sensed at satin fabrics of hard-twist yarn, noil yarn and spun yarn, while it was not at the fabrics of normal satin and twill at all. 'Flexibility' was reverse to 'surface roughness'. Thermal sense was felt highly at satin fabrics of noil-yarn, while low at plain fabrics of normal yarn. 'Dryness' was high at satin fabrics of hard-twist yarn and while it was low at normal satin fabrics. Predicted equations for subjective hand from mechanical properties of fabrics were developed using Stevens's law and stepwise regression and the coefficients of determination were high.

• The Journal of Engineering Geology
• /
• v.20 no.3
• /
• pp.297-310
• /
• 2010

This study represents basic research into the utilization of mixed ash (fly ash and bottom ash) from the ash pond of the Taean Thermal Power Plant as a construction material. We conducted physical and mechanical experiments on the mixed ash and examined its engineering characteristics in terms of its use as a material for road landfill and structure backfill. We evaluated the physical and chemical characteristics of the ash by performing tests to determine specific gravity, maximum and minimum density, liquid limit and plastic limit, grain size distribution, composition (by X-ray diffraction), and loss on ignition. We also evaluated the mechanical characteristics by testing for permeability, compaction, CBR, and tri-axial compression. The experiments on the mixed ash yielded a specific gravity of 2.18-2.20, dry density of $9.38-13.32\;kN/m^3$, modified CBR of 16.5%-21%, permeability coefficient of 1.32 to $1.89-10^{-4}cm/sec$, and drained friction angle of $36.43^{\circ}-41.39^{\circ}$. The physical and mechanical properties of the mixed ash do not meet the quality standards stipulated for road landfill and structure backfill materials. Mixed ash with a high content of fly ash failed to meet some of the quality standards. Therefore, in order to utilize the mixed ash as a material for road landfill and structure backfill, it is necessary to improve its properties by mixing with bottom ash.