• Korean Journal of Microbiology
• /
• v.51 no.4
• /
• pp.374-381
• /
• 2015

Occurrences of coastal dredged materials are ever increasing due to port construction, navigational course maintenance and dredging of polluted coastal sediments. Ocean dumping of the coastal dredged materials has become virtually prohibited as London Treaty will be enacted as of the year 2012. It will be necessary to treat and recycle the dredged materials that may carry organic pollutants and heavy metals in a reasonable and effective process: collection of the dredged materials, liquid and solid separation, and treatment of organic compounds and heavy metals. In this study we have developed a continuous bioreactor system that can treat a mixture of silt and particulate organic matter using a microbial consortium (BM-S-1). The steady-state operation conditions were: pH (7.4-7.5), temperature ($16^{\circ}C$), DO (7.5-7.9), and salt concentration (3.4-3.7%). The treatment efficiencies of SCOD, T-N and T-P of the mixture were 95-96%, 92-99%, and 79-97%. The system was also effective in removal of heavy metals such as Zn, Ni, and Cr. Levels of MLSS during three months operation period were 11,000-19,000 mg/L. Interestingly, there was little sludge generated during this period of operation. The augmented microbial consortium seemed to be quite active in the removal of the organic component (30%) present in the dredged material in association with indigenous bacteria. The dominant phyla in the treatment processes were Proteobacteria and Bacteroidetes while dominant genii were Marinobacterium, Flaviramulus, Formosa, Alteromonadaceae_uc, Flavobacteriaceae_uc. These results will contribute to a development of a successful bioremediation technology for various coastal and river sediments with a high content of organic matter, inorganic nutrients and heavy metals, leading to a successful reuse of the polluted dredged sediments.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.3-6
• /
• 2012

Purpose : Samsung medical ceter shall find a cause of the interference factor and suggest a solution for it. Materials and Methods : A sample of $^{18}F$-FDG, radioactive pharmaceuticals produced by TRACERlab MX and FASTlab synthesizer. Gel-clot method uses Positive control tube and single test tube. Kinetic chromogenic method uses ENDOSAFE-PTS produced by Charles River. Results : According to Gel clot method of Endotoxin Tests at FASTlab, both turbidity and viscosity increased at 40-fold dilution and Gel clot was detected. In case of TRACERlab MX, Gel clot was detected in most of samples but intermittently not in a few of them. When using ENDOSAFE-PTS, sample CV (Coefficient of Variation) of FASTlab is 0% at all dilution rates whereas spike CV is 0% at 1-fold dilution, 0~35% at 10-fold, 3.6~12.9% at 20-fold, 5.2~7.1% at 30-fold, 1.1~17.4% at 40-fold, spike recovery; 0% at one-fold, 25 ~ 58% at 10-fold, 50 ~ 86% at 20-fold, 70~92% at 30-fold, and 75~120% at 40-fold. Sample CV of TRACERlab MX, is 0% at all dilution rates whereas spike CV is 1.4~4.8% at one-fold dilution, 0.6~19.9% at 10-fold, spike recovery; 35~72% at one-fold dilution and 77~107% at 10-fold. Conclusion : Gel clot does not seem to occur probably to H3PO4 which engages in bonding with Mg2+ion contributing gelation inside PCT. Dilution which is identical to reducing the amount of H3PO4, could remove interfering effects accordingly. Spike recovery was obtained within 70~150% - recommended values of supplier - at 40-fold dilution even in kinetic chromogenic method.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.2
• /
• pp.112-129
• /
• 2012

The aim of this study was to provide basic data in managing the project that was carried out on Bulgwangcheon in a nature-friendly way to improve the conditions around the areas, which was brought to completion in 2002, based on changes in ecological characteristics. For this propose, this study examined documents related to the project, compared physical and enviromnental changes before and after the project was conducted and analyzed changes in the stream ecosystem. The result showed that in areas that effluent water was often observed, especially when it rained, the river wall was washed away and vegetation was found damaged. As for actual vegetation, this study compared planting coverage of each section of the research area and actual vegetation charts. The results indicated that Lespedeza spp., Aster koraiensis among mixed seeds that were planted in the reservoir path were almost swept away while Festuca arundinacea dominated the areas. Phragmites communis, Miscanthus sacchariflorns and Salix gracilistyla which had been planted in a small number were also almost washed out though a small number of them were left to form a colony. After examining the topography and structure of the plant community, this study found that areas where mixed seed were planted had changed into two types of vegetation: First type of area is dominated by P and R which are usually raised in apron with abundant floating particles. The second type of area is dominated by dry gramineous plant such as F and A. Areas around low flow channel where Phragmites communis, Miscanthus sacchariflorus and Salix gracilistyla planting construction method is applied was washed away with the width of low flow channel reduced. Though P, M and S formed a small community in some areas around the low flow area, they were in small number and in composition of simple plant species. Two ways were suggested in this study to manage the stream in an ecological way. First, adequate revetment construction methods should be applied by monitoring the flow of the stream as well as considering the flood control of urban streams. Second, target vegetation communities that are suitable for the environment of the stream should be chosen and be plantedconstantly with high density. At the same time, ornamental native plants shouldn't be planted as they have been and disturbing vegetation should be removed.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.463-471
• /
• 2006

Electrical resistivity surveys were conducted at areas of abandoned landfills in Cheonan and Wonju. Geology and extent of leachate migration around the landfills were evaluated with collected resistivity data by 2-D and 3-D resistivity inverse modeling. The Cheonan landfill is located above the paddy fields and the resistivity survey lines were crossed to examine possible pollution at the paddy fields by leakage of the landfill leachate. In Wonju, the landfill and the downgradient paddy fields are divided by a concrete barrier wall. At the bottom of the landfill, there is a leachate settlement system, which has not been in operation. To evaluate leachate leakage into the paddy fields, a total of 4 survey lines were used. According to the resistivity survey results, the landfill leachate in Cheonan appeared to be restricted only within the interior of the landfill, not to migrate into the subsurface of the paddy fields. These results are well consistent with electrical conductivity values of groundwaters obtained from a periodic analysis of water qualities. In Wonju, however, it was inferred that the leachate emanating from the landfill migrated beneath the abandoned leachate settlement system and the leachate would reach the downgradient paddy fields. Low resistivity area was observed in the old reservoir area and it appeared to be derived from convergence of groundwater flows from the surrounding valley and the moist wet land. In addition, groundwater flow into the paddy fields occurs beneath the old reservoir embankment at depths of $7{\sim}8m$. This paper reports details of the resistivity surveys for the uncontrolled landfills.

• Korean Journal of Remote Sensing
• /
• v.29 no.1
• /
• pp.11-20
• /
• 2013

Space-borne Synthetic Aperture Radar(SAR) has been one of the most effective tools for monitoring quantitative oceanographic physical parameters. The Doppler information recorded in single-channel SAR raw data can be useful in estimating moving velocity of water mass in ocean. The Doppler shift is caused by the relative motion between SAR sensor and the water mass of ocean surface. Thus, the moving velocity can be extracted by measuring the Doppler anomaly between extracted Doppler centroid and predicted Doppler centroid. The predicted Doppler centroid, defined as the Doppler centroid assuming that the target is not moving, is calculated based on the geometric parameters of a satellite, such as the satellite's orbit, look angle, and attitude with regard to the rotating Earth. While the estimated Doppler shift, corresponding to the actual Doppler centroid in the situation of real SAR data acquisition, can be extracted directly from raw SAR signal data, which usually calculated by applying the Average Cross Correlation Coefficient(ACCC). The moving velocity was further refined to obtain ocean surface current by subtracting the phase velocity of Bragg-resonant capillary waves. These methods were applied to Envisat ASAR raw data acquired in the East Sea, and the extracted ocean surface currents were compared with the current measured by HF-radar.

• Journal of Conservation Science
• /
• v.8 no.1 s.11
• /
• pp.40-50
• /
• 1999

A geotechnical research including observation of the movement of wall-structure, monitoring of groundwater, non-destructive geophysical investigation was conducted to workout a countermeasure to conserve the Muryong Royal Tomb which is the most extinguishable cultural property of the Baekje dynasty. Movement of the structure of Muryong Royal Tomb generally arises to the front chamber and its amplitude in a rainy season is twice of that in the dry season. It represents serious problem concerned about structural safety of the royal tomb in the rainy season. Movement of wall-structure is caused due to the rain infiltration through cracks in the quicklime layer within the soil mound on the top of the royal tomb and the change of the temperature inside of the tomb. Cracks found around the Muryong Royal Tomb are mostly spread in NW and SE of the tomb structure and it harmonizes with the direction of movement of wall-structure of the Muryong Royal Tomb. Counter-plans for safety and prevention of water-leakage that obstruct the movement of wall structures towards the direction of south are very important for the conservation of Muryong Royal Tomb. After getting rid of the cause of structural change by the restoration of the front chamber of the Muryong Royal Tomb, it needs to reinforce the quicklime layer for prevention of waterleak.

• The Journal of Engineering Geology
• /
• v.26 no.3
• /
• pp.331-337
• /
• 2016

Radial collector wells (RCWs) have been managed by Korea Rural Community Corporation (KRC) since 1983, installing 98 wells for agriculture in rural area over the country. Among them, 20 wells were installed upstream of 5 subsurface dams and the remaining were installed regardless of the subsurface dam. Most of RCWs have been developed in 1980s and 1990s, and 83 wells have been passed more than 20 years after construction. The number of horizontal arms for RCWs varies from 9 to 28, with length and diameter being 10~30 m and 65 mm, respectively. The central caisson with an inner diameter of 3.5 m was commonly constructed to a depth of 10 m. The maximum pumping rates in RCWs, which are located at distances of 10 to 1,200 m from the river, are 2,000~10,000 m³/day. RCW has a fundamental problem that reduced pumping capacity and degraded well efficiency, due to the physical and chemical clogging. From the feasibility test for improving RCW performance, specific capacity increased to 67% after rehabilitation. TV logging for RCW horizontal arm shows that near the caisson is more severe clogging. From the results of this study, KRC has established the guidebook for monitoring and improving well efficiency through physical/chemical treatment, well logging, and hydraulic tests and managed RCWs periodically with its rehabilitation methods.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.7
• /
• pp.970-974
• /
• 2012

Prunus mume is said to aid in the recovery of fatigue and improvement of liver and stomach functions. To obtain the best benefits of the whole fruit, fresh green Prunus mume was de-seeded and the fruit pulp was vacuum dried. The vacuum-dried pulp was powdered and sieved through a 250 ${\mu}m$ sieve. Then the sieved green Prunus mume powder (GPP) was granulated with water (GPPGW) and with Prunus mume extract (GPPGE) with a fluid bed coater. The physicochemical and sensory properties of GPP, GPPGW, and GPPGE were then evaluated. As a result, the water dispersibility (dispersible time) of GPP, GPPGW, and GPPGE was 21.19 sec, 6.46 sec, and 4.85 sec, respectively. The powder fluency (angle of repose) of GPP, GPPGW, and GPPGE was $11.25^{\circ}$, $8.65^{\circ}$, and $9.52^{\circ}$, respectively. The overall consumer acceptance of GPP, GPPGW, and GPPGE was 3.50, 4.62 and 5.00, respectively. Inconclusion, Prunus mume can be used as granulated whole fruit pulp with good powder fluency and dispersibility.

• Korean Chemical Engineering Research
• /
• v.44 no.4
• /
• pp.375-381
• /
• 2006

In this sturdy, spherical activated carbon(SPAC) contained $TiO_2$ was made by ion-exchanged treatment and heat treatment for applying fluidizing bed system. The ion-exchange resin was treated by $TiCl_3$ aqueous solution. The treated resin and raw resin were heat-treated under nitrogen condition to convert into Ti-SPAC. During the heat-treatment, burn-off weight amounts and the element were measured by means of TGA and TGA/MS, individually. The physicochemical properties of Ti-SPAC was characterized by means of XRD, SEM, EDS, BET, EPMA, ESR, intensity and titanium content. The Ti-SPAC had spherical shape with diameter size about $350{\mu}m{\sim}400{\mu}m$ and $617m^2/g$ specific surface area. Structure of $TiO_2$ in Ti-SPAC was anatase and rutile form. Also, $TiO_2$ on SPAC were found that the $TiO_2$ were uniformly distributed through EPMA analysis. Moreover, the Ti-SPAC showed indirect photocatalyst activity estimation through ESR analysis, characteristics of photocatalyst potentially. Over all results, Ti-SPAC was used in fluidizing bed UV/photocatalyst system to remove HA(Humic Acid). That results were HA removal efficiency was about 70％ and Ti-SPAC intensity was preserved during reaction. Ti-SPAC showed practical possibility as photocatalyst in fluidizing bed system.

• Korean Journal of Food Science and Technology
• /
• v.35 no.3
• /
• pp.335-341
• /
• 2003

The physicochemical characteristics and chemical compositions of six Korean traditional soybeans were studied namely, cheongtae, seoritae, jinjoori, subaktae, yutae and huktae. The characteristics of imported soybean were also investigated for comparison. The average weight of one hundred-seed for huktae, which is normally used as nutritional supplement by adding to rice during cooking, was 43.1 g. The average whole length and long and short width for six varieties of the bean were $5.68{\sim}10.15\;mm$, $5.10{\sim}9.33\;mm$ and $4.30{\sim}7.48\;mm$, respectively. Color of cheongtae and subaktae were green, while that of seoritae, jinjoori, and huktae were black with yutae having yellow seed coat. Moisture, crude fat, crude protein and ash content of soybean seeds were all in the ranges of $8.5{\sim}11.5%$, $14.0{\sim}20.8%$, $38.0{\sim}49.2%$ and $4.2{\sim}5.0%$, respectively, showing differences among cultivars. Methionine, cysteine and histidine were the minor components of soybean protein and percentage of methionine to the total proteins showed significant varietal differences. Subaktae contained the highest content of methionine with 4.0 mg/g protein, while jinjoori the lowest with 1.8 mg/g protein. The main fatty acids of total lipid were linoleic, oleic and palmitic acids, which comprised over 80% of total fatty acids. Cultivar yutae had higher content of neutral lipid but lower content of glycolipid and phospholipid. Among the fatty acids, content of linoleic acid were the highest $(41.4{\sim}54%)$ and ratios of unsaturated fatty acid to the total fatty acid was $82.7{\sim}85.2%$. The main fatty acid of neutral lipid, glycolipid, and phospholipid was linoleic acid.