• 한국지구물리탐사학회:학술대회논문집
• /
• 2010.10a
• /
• pp.145-148
• /
• 2010

• Geophysics and Geophysical Exploration
• /
• v.6 no.2
• /
• pp.77-86
• /
• 2003

We designed a new time-domain, finite-difference, elastic wave modeling technique, based on a displacement formulation. which yields nearly correct solutions to Lamb's problem. Unlike the conventional, displacement-based, finite-difference method using a node-based grid set (where both displacements and material properties such as density and Lame constants are assigned to nodal points), in our new finite-difference method, we use a cell-based grid set (where displacements are still defined at nodal points but material properties within cells). In the case of using the cell-based grid set, stress-free conditions at the free surface are naturally described by the changes in the material properties without any additional free-surface boundary condition. Through numerical tests, we confirmed that the new second-order finite differences formulated in the cell-based grid let generate numerical solutions compatible with analytic solutions unlike the old second-order finite-differences formulated in the node-based grid set.

• International Journal of Highway Engineering
• /
• v.4 no.4 s.14
• /
• pp.53-66
• /
• 2002

Asphalt binder characteristics in asphalt mixture are changed due to aging. However. depending upon aggregate and binder used, asphalt mixture dose not show the same level of stiffness and brittleness under the same ageing level. The factors affecting Physical Properties change of the asphalt binder within aged asphalt concrete are not well known and there is limited study which is dealing with this topic This study dealt with evaluation of physical properties of asphalt binder recovered from the mixtures after short-term and long-term aging. Two asphalts. two aggregates. two gradations and four polymers were used to make 32 mixture combinations. The mixtures were prepared and aged artificially in a forced draft oven. The measured physical properties included absolute viscosity, kinematic viscosity and penetration. Statistical analyses were carried out to find out the factor(s) having a significant effect on change of physical property of asphalt binder due to asphalt mixture aging. The results of study shown that aggregate, gradation and polymer had a significant effect on change of physical properties of asphalt binder.

• Geophysics and Geophysical Exploration
• /
• v.20 no.3
• /
• pp.137-145
• /
• 2017

High-grade limestone applied to various chemical industries is abundant within upper Pungchon formation in Taebaeksan basin, South Korea. Geophysical exploration is one of the most efficient methods to investigate subsurface geological structure in an extensive area. Since the geophysical exploration for the high-grade limestone has rarely been conducted in Korea, its appropriate strategy has not been set up yet. In this study, we focused on to suggest the reasonable strategy and accumulate geophysical databases which are essential for interpreting geophysical images by characterizing laboratory physical properties of in-situ rocks. Hence, rocks were obtained from drilled cores consisting of lower Hwajeol formation, Pungchon formation, and dykes in Jeongseon area, Gangwon province. Geophysical laboratory experiments and petrography of the rocks were conducted. Since susceptibility values of the rocks in Pungchon Formation were obviously lower than those of upper Hwajeol and dykes, it is considered that the lithological boundaries could be distinguished by magnetic survey. In addition, electrical properties of the rocks in middle Pungchon formation were relatively different compared with those of upper/lower Pungchon formations. Thus, induced polarization is shown to be able to detect the high-grade limestone in upper Pungchon formation.

• Geophysics and Geophysical Exploration
• /
• v.22 no.1
• /
• pp.1-11
• /
• 2019

Well logging technologies are used to measure the physical properties of reservoirs through boreholes. These technologies have been utilized to understand reservoir characteristics, such as porosity, fluid saturation, etc., using equations based on rock physics models. The analysis of well logs is performed by selecting a reliable rock physics model adequate for reservoir conditions or characteristics, comparing the results using the Archie's equation or simandoux method, and determining the most feasible reservoir properties. In this study, we developed a joint inversion algorithm to estimate physical properties in shaly sandstone reservoirs based on the pre-existing algorithm for sandstone reservoirs. For this purpose, we proposed a rock physics model with respect to shale volume, constructed the Jacobian matrix, and performed the sensitivity analysis for understanding the relationship between well-logging data and rock properties. The joint inversion algorithm was implemented by adopting the least-squares method using probabilistic approach. The developed algorithm was applied to the well-logging data obtained from the Colony gas sandstone reservoir. The results were compared with the simandox method and the joint inversion algorithms of sand stone reservoirs.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.118-118
• /
• 2003

편의와 fresh-like quality를 선호하는 소비 경향에 맞추어 가공한 fresh-cut사과의 선도 연장을 위한 저해제를 탐색하였다. 실험에 사용된 사과는 박피하여 속심을 제거한 사과를 8조각으로 절단하여 저해제에 3분간 침지한 후 물기를 제거하고 각각 LDPE 포장지에 포장하여 실온에서 저장하면서 colorimeter와 rheometer를 이용하여 색도와 물성을 측정하였다. 저해제로는 1% ascorbic acid, citric acid, NaCl, MgCl$_2$, CaCl$_2$, KCl, CaSO$_4$, MgSO$_4$, $Na_2$SO$_4$, oxalic acid, calcium lactate, calcium citrate를 사용하였으며 천연저해제로는 건칡, 맥문동, 목향, Rhubarb, 당귀, 오약, 시체, 지각, 천문동, 청피, 계피, 구기자, 당귀, 진피, 감초, 녹차, 후추 등을 열수추출하여 사용하였다. 물리적인 변화는 시간이 경과함에 따라 감소하는 추세를 보였으며 일부 건조로 인해 texture의 증가를 나타내기도 했다. 처리에 따른 물리적인 변화로는 CaCl$_2$, NaSO$_4$, Cl, 시금치를 처리하였을 때 그 변화가 가장 작았으나 시금치의 경우 시금치로 인한 사과의 색변화로 관능적으로 좋지 않았다. 한약재는 목향, 당귀, 지각, 계피를 처리하였을 때 물리적인 변화가 가장 작았으나 시금치와 마찬가지로 처리 초기에 한약재 자체의 향과 색으로 인하여 관능적으로 좋지 못한 결과를 나타냈다. 갈변 정도를 나타내는 ΔE의 변화는 KCl과 CaCl$_2$, CaSO$_4$를 처리한 구에서 변화가 가장 작았으며 한약재를 처리하였을 경우 당귀, 천문동을 처리한 구에서 효과를 보였다. oxalic acid는 갈변저해에는 효과적이었으나 시간이 경과함에 따라 수분의 용출이 증가하였으며 물성의 변화도 컸다. 또한 ZnCl$_2$를 처리한 구에서는 이취 발생과 수분 용출이 컸으며 색의 변화도 컸다.

• Composites Research
• /
• v.18 no.6
• /
• pp.48-53
• /
• 2005

In this study, to improve the ballistic efficiency of very brilliant alumina-silica armor material, forming press and sintering temperature were changed. After physical/mechanical measurement, we measured ballistic properties about KE(Kinetic Energy, L/D=10.7, tungsten heavy alloy) and HEAT(High Explosive Anti-Tank, K215) projectiles and analyzed them. As a result, in $1235^{\circ}C$, it appeared the highest ballistic efficiency about HEAT and it improved $22\%$ ballistic efficiency, better than invented alumina-silica armor material before.

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.259-260
• /
• 2011

한국과학기술정보연구원과 가톨릭대학교 의과대학 가톨릭응용해부연구소에서는 기초기술연구회 National agenda project 일환으로 척추 연구자들이 쉽게 사용할 수 있는 기초 자료를 구축하고 있다. 척추 관련 컴퓨터 시뮬레이션 연구에 활용할 수 있는 모델 제작을 위한 형상 정보와 물리적 성질 정보를 구축하고 있다. 물리적 성질 정보 구축은 60대, 70대 기증시신 10여 표본을 활용하여 척추뼈의 임상적, 물리적 골밀도를 측정하고, 목척추(cervical vertebra), 등척추(thoracic vertebra), 허리척추(lumbar vertebra) 부분의 굽힘-폄(flexion-extension) 시험, 가쪽 굽힘(lateral bending) 시험, 회전(torsion), 압축(body/disc compression) 시험을 수행하여 작용력과 굽힘량의 관계를 구축하고 있다. 구축된 물성 시험 결과는 형상 모델과 함께 제공되어 자료의 활용도를 높이고 있으며, 이를 이용하여 한국인 특성이 반영된 척추 관련 연구 및 제품 개발에 활용될 수 있다.

• Journal of Energy Engineering
• /
• v.20 no.4
• /
• pp.309-317
• /
• 2011

The effect of physical properties of coal fuels and carbon particle on performance of DCFC (Direct Carbon Fuel Cell) was investigated. Shenhua and Adaro were selected as coal fuel and carbon particle was used for comparing with coal. The Ultimate, proximate, SEM, XRD, and BET analysis of samples were conducted. The component of char was more important than that of raw coal because the operating temperature of reactor is higher than devolatilization region of coal. The surface area and volume of pores affected significantly the performance of the system than content of fixed carbon or char rates. The performance of DCFC with carbon particle was in proportional to working temperature.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.177-189
• /
• 2012

Evaluation of three-dimensional ore body modeling has been performed by applying the geostatistical integration technique to multiple geophysical (electrical resistivity, MT) and geological (borehole data, physical properties of core) information. It was available to analyze the resistivity range in borehole and other area through multiple geophysical data. A correlation between resistivity and density from physical properties test of core was also analyzed. In the case study results, the resistivity value of ore body is decreased contrast to increase of the density, which seems to be related to a reason that the ore body (magnetite) includes heavy conductive component (Fe) in itself. Based on the lab test of physical properties in iron mine region, various geophysical, geological and borehole data were used to provide ore body modeling, that is electrical resistivity, MT, physical properties data, borehole data and grade data obtained from borehole data. Of the various geostatistical techniques for the integrated data analysis, in this study, the SGS (sequential Gaussian simulation) method was applied to describe the varying non-homogeneity depending on region through the realization that maintains the mean and variance. With the geostatistical simulation results of geophysical, geological and grade data, the location of residual ore body and ore body which is previously reported was confirmed. In addition, another highly probable region of iron ore bodies was estimated deeper depth in study area through integrated modeling.