• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.4
• /
• pp.77-86
• /
• 2021

In this study, to use as basic data for the organic waste resource energy incentive system, the energy efficiency is evaluated through the mass balance and energy balance calculation results of the anaerobic digester where food waste, food waste leachate and various organic wastes are treated. As a result of the mass balance analysis for 11 biogasification facilities, it was confirmed that 21.1% of process water and 25.7% of tap water were input in large amounts, excluding organic waste. Accordingly, it accounted for 87.6% of the total effluent of linked treated water. In addition, considering that 15.7% of the total input volume is converted to biogas and the average total solids (TS) is 22%, an average material conversion rate of 75% was confirmed. As a result of the energy balance analysis, the energy conversion rate was confirmed to be 78.5% on average by analyzing the biogas calorific value compared to the potential energy of the influent. The average biogas production efficiency including external energy sources for biogas production was 69.4%, and the biogas plant efficiency to which unused effluent energy was applied was 58.9% on average.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.5
• /
• pp.289-296
• /
• 2009

All over the world more and more attention is being paid to green management which enables environment-friendly sustainable development. To keep up with these global trends and in response to the government's "low carbon green growth" policy, many efforts are being made in the port and logistics in order to drastically reduce carbon emissions and save operating expenses. To this end, the engine power source of the cranes in the container terminal is being replaced with electricity from fossil fuel. Among those cranes, especially e-RTGC has been proved to be practical and excellent in its performance through many previous studies. However, no empirical study has yet been made on its introduction effects when e-RTGC has been introduced to the container terminal. In the meantime, however, many domestic container terminals have introduced e-RTGC, and so some data have been accumulated for further research. Under these circumstances, this study has tried to make an empirical study through the case study of D container terminal, checking the restriction factors to be considered at the time of eURTGC introduction, and analyzing its introduction effects and problems. We have high expectations that this study will provide key consideration factors and empirical analysis data to the decision makers who plan to introduce an e-RTGC system, and also will be used as a reference to the development direction of e-RTGC.

• Journal of Navigation and Port Research
• /
• v.47 no.1
• /
• pp.37-48
• /
• 2023

Recently, the increase of international trade volume is leading to risk exposure and safety accidents in the port terminal industry. In addition, as Serious Disaster Punishment Act came into effect on January, 2021, various guidelines and laws to protect safety and life in port terminals are being enacted. However, despite these efforts, medium-to-large safety accidents in the port terminal industry have occurred. According to the Korea Occupational Safety and Health Agency, from 2016 to 2019, the number of casualties in the port handling industry increased by 4.2%. To build some effective follow-up management of port accidents and preparation of related safety laws/systems, a risk analysis in consideration of causes and damage of accidents should be conducted. Therefore, in this study, major risk factors and preventive measures were derived by conducting risk assessment based on 1,039 cases of port terminal accidents collected by the Korea Occupational Safety and Health Agency for five years. Priorities for preventive measures were then determined through IPA analysis, Borich needs analysis, and The Locus For Focus analysis.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.7
• /
• pp.65-76
• /
• 2007

Recently, there have been many construction projects on soft ground with growth of industry and various construction problems concerning soft soil behavior also have been reported. Especially, foundation piles of abutments and (or) buildings which were constructed on the soft ground have been suffering from a lot of stability problems of inordinary displacement due to lateral flow of soft ground. Although many researches for this phenomena have been carried out, it is still difficult to assess the mechanism of lateral flow on soft ground quantitatively. And reliable design method for judgement of lateral flow occurrence is not established yet. In this study, PNN (probabilistic neural network) and CNN (committee neural network) theories were applied for judgment of lateral flow occurrence based on eat data compiled from Korea and Japan. Predictions of PNN and CNN models for new data which were not used during model development are compared with those predicted by conventional empirical methods. It was found that the developed PNN and CNN models can predict more precise and reliable judgment of lateral flow occurrence than conventional empirical methods.

• Korea Trade Review
• /
• v.42 no.5
• /
• pp.113-136
• /
• 2017

New product preannouncement through global supply chain management and international strategic alliances is a critical issue for firm's survive and gaining the competitive advantage in the global smart-phone market. To identify the impact of exploration alliance and exploitation alliance on the short-term's Firm Performance, respectively, This study implemented the event study and the cross sectional regression analysis, focusing on the case of Galaxy Note series. Research results identified that new technologies by exploration alliance and the existing technologies through exploitation alliance have a positive effect on the short-term's performance of vendors related. Furthermore, information for the new products showed higher the excess earning rate than information related to the existing technologies. This implies the firms that provides new technologies have a stronger innovative ability than the companies serving the existing technologies, recognizing as a positive signal in the market. Finally, this study implicates that new technologies by exploration alliance enhances innovative abilities from new product preannouncement, and is a critical variable that can determines whether to survive in the market.

• Korea Trade Review
• /
• v.43 no.1
• /
• pp.109-130
• /
• 2018

The cumulative standard is one of the criteria determining the origin of imported goods and is a provision that allows non-origin materials to be treated as origin goods when satisfying certain conditions. Regarding the Korea-Canada FTA, new cumulative standards were applied concerning cross accumulation of automobile products. It would benefit U.S. originating intermediate goods of HS code chapter 84, 85, 87, and 94 obtained into HS code heading from 8701 into 8706. We examine the effectiveness of crossover cumulative standards through the change in the import values of 84, 85, 87, 94, which are target items for cross cumulation. Only items designated for automobile parts were selected and analyzed. From the estimation results, significant changes appeared in 20 of the 35 items. It was found that the import amount increased significantly as of January 2015 or the rate of change in trend increases more than before. In addition, the estimation results show that Korean auto companies utilizing the cumulative standards through increased imports of auto parts form the U.S.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.13 no.6
• /
• pp.7-20
• /
• 2017

The advancement of cloud and big data and the considerable growth of traffic have increased the complexity and problems in the management inefficiency of existing networks. The software-defined networking (SDN) environment has been developed to solve this problem. SDN enables us to control network equipment through programming by separating the transmission and control functions of the equipment. Accordingly, several studies have been conducted to improve the performance of SDN controllers, such as the method of connecting existing legacy equipment with SDN, the packet management method for efficient data communication, and the method of distributing controller load in a centralized architecture. However, there is insufficient research on the control of SDN in terms of the quality of network-using applications. To support the establishment and change of the routing paths that meet the required network service quality, we require a mechanism to identify network requirements based on a contract for application network service quality and to collect information about the current network status and identify the violations of network service quality. This study proposes a method of identifying the quality violations of network paths through ontology to ensure the network service quality of applications and provide efficient services in an SDN environment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1C
• /
• pp.1-8
• /
• 2008

Recently, there have been many construction projects on soft ground with growth of industry and economy. Therefore foundation piles of abutments and(or) buildings had been suffering from a lot of stability problems of inordinary displacement due to lateral flow of soft ground. Although many researches about lateral flow have been carried out, it is still difficult to assess the mechanism of lateral flow in soft ground quantitatively. And reasonable design method for judgement of lateral flow occurrence in soft ground is not established yet. In this study, six PNN (Probabilistic Neural Network) models were developed according to input variables and database compiled from Korea and Japan for the judgment of lateral flow occurrence. PNN models were compared with present empirical methods. It was found that the developed PNN models can give more precise and reliable judgment of lateral flow occurrence than empirical methods.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.389-390
• /
• 2022

Recently, Recently, the increase in international trade volume and the explosive increase in cargo volume due to the non-face-to-face society are leading to an increase in risk exposure and safety accidents in the port industry. In addition, as the Serious Disaster Punishment Act came into effect on January 27, 2021, various guidelines and laws to protect safety and life in port terminals are being enacted. However, despite these efforts, medium-to-large safety accidents in the port terminal industry continue to occur. According to the Korea Occupational Safety and Health Agency, from 2016 to 2019, the number of casualties in the port handling industry increased by 4.2%. For effective follow-up management of port accidents or the preparation of related safety laws/systems, a risk analysis in consideration of the cause and damage of the accident must be conducted first, so that realistic accident reduction and prevention measures can be established. Therefore, in this study, major risk factors and preventive measures were derived by conducting risk assessment based on 1,039 cases of port terminal accidents collected by the Korea Occupational Safety and Health Agency for 5 years from 2016 to 2022. After that, the priorities for preventive measures were determined through IPA analysis, Borich needs analysis, and The Locus For Focus analysis.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.64-65
• /
• 2023

The purpose of this study was to assess the current status of cyber security at the Busan Port container terminal and derive strengthening factors through exploratory research. In recent years, the maritime industry has actively adopted Fourth Industrial Revolution technologies, resulting in changes in the form of ports, such as automated and smart terminals. While these changes have brought positive improvements in port efficiency, they have also increased the potential for cyber security incidents and threats, including information leakage through cargo handling equipment and ransomware attacks leading to terminal operations disruption. Especially in the case of ports, cyber security threats can have not only local effects within the port but also physical damage and implications for national security. However, despite the growing cyber security threats within ports, research related to domestic port cyber security remains limited. Therefore, this study aimed to identify factors for enhancing cyber security in ports and derive future enhancement strategies. The study conducted an analysis focusing on the Busan Port container terminal, which is one of the leading ports in South Korea actively adopting Fourth Industrial Revolution technologies, and conducted a survey of stakeholders in the Busan Port container terminal. Subsequently, exploratory factor analysis was used to derive strengthening factors. This study holds significance in providing directions for enhancing cyber security in domestic container ports in the future.