• Title/Summary/Keyword: 문인

Search Result 17,566, Processing Time 0.042 seconds

Changes in Genetic Diversity of a Test Plantation of Liriodendron tulipifera L. by simulated Practices for Seed Trees (백합나무 시험림(試驗林)의 모의간벌(模擬間伐)에 따른 유전다양성(遺傳多樣性) 변화(變化))

  • Hong, Yong-Pyo;Ryu, Keun-Ok;Cho, Kyung-Jin;Hong, Kyung-Nak
    • Journal of Korean Society of Forest Science
    • /
    • v.90 no.1
    • /
    • pp.155-160
    • /
    • 2001
  • Changes in genetic diversity after seed-tree practice were simulated in test plantation of tulip tree at Sokdal-ri, Banwol-myon, Hwasung-gun, Kyungki Provence. I-SSR markers were analyzed in a total of 305 tulip trees. A total of 89 amplicon variants were observed by PCR with 9 I-SSR primers. Genetic diversity for 305 trees was relatively high (S. I. =0.4532). Individuals originated from the seed orchards in U.S.A. showed the highest level of genetic diversity (0.4530), those from Anyang showed the medium level (0.4152), and those from Cheonbuk showed the lowest (0.3929). Simulation of seed-tree practice accompanied by 2 consecutive thinnings was performed on the basis of morphological characteristics and planted distances of the individual trees, which left 37 trees as candidates for seed-trees. Decreasing rate of genetic diversity within seed sources was greatest for individuals from Cheonbuk (28.3%), moderate for those from Anyang (16.3%), and smallest for those from U.S.A. (8.0%). In spite of little difference in decreasing rate of individuals for the 3 seed sources (87.5~88.2%), large difference in decreasing rate of genetic diversity within seed sources might be due to difference in number of mother trees for the 3 seed sources. For example, whereas individuals originated from the seed orchard in U.S.A., which showed the smallest decreasing rate of genetic diversity, might be originated from relatively large number of mother trees, those from Anyang and Cheonbuk might be originated from relatively small number of mother trees. Although mean of 17.5% of the genetic diversity within seed sources was decreased through 2 consecutive thinnings, a decrease in genetic diversity for the whole individuals (37 trees) was only 6.1%. This observation suggests that the seed-tree practice on the basis of the criteria established in the present study may not result in great reduction in overall genetic diversity of the progenies.

  • PDF

Effects of Basic Oxygen Furnace Slag Application on Soils and Plant Growth at a Nursery and Pine Forests (제강(製鋼)슬래그의 시용(施用)이 묘포(苗圃) 및 소나무림의 토양(土壤)과 식물생장(植物生長)에 미치는 영향(影響))

  • Park, In Hyeop;Seo, Young Kwon;Lim, June Taeg;Lee, Choong Il
    • Journal of Korean Society of Forest Science
    • /
    • v.90 no.6
    • /
    • pp.699-706
    • /
    • 2001
  • This study was conducted to evaluate the effectiveness of basic oxygen furnace (BOF) slag as soil conditioner in a nursery and two natural forests. The BOF slag was applied at rates of 0, 4, 8, and 12 t/ha for seedbed nursery of three tree species-Pinus densiflora, Larix leptolepis and Amorpha fruticosa; and 0, 10, 20, and 40 t/ha for Pinus densiflora natural forests located at two sites. In case of the nursery study, the significant increase in soil pH and contents of Ca, Mg, $SiO_2$, Fe and Mn was noticed after six months of the BOF slag application. Dry weight of Pinus densiflora seedlings with BOF slag treatments was lower compared with that of control. There were no significant differences among treatments in dry weight of Larix leptolepis seedlings. Dry weight of Amorpha fruticosa seedlings, which are deciduous species and grow rapidly at seedling stage, increased significantly and T/R ratio decreased as BOF slag rate increased. The differences of effects of BOF slag application on the seedlings of tree species may be attributed to the differences of optimum pH range of the species. In Pinus densiflora natural forests, there were no significant differences in soil pH and contents of $SiO_2$, Fe and Mn among the treatments, but these values became higher as BOF slag rate increased. Contents of Ca in soil became significantly higher as BOF slag rate increased. There were no significant differences among treatments in net production of mature Pinus densiflora trees, but BOF slag rate of 10ton/ha showed the highest net production. Young Pinus densiflora trees at the plots of BOF slag rate of 10 t/ha showed significantly higher root collar diameter growth rate and twig net production than those of other treatments. It may be given as a conclusion that BOF slag application in nursery and forest soil increased soil pH and contents of Ca, $SiO_2$, Fe and Mn in soil and they showed the ability of BOF slag to be used as a soil conditioner in strongly acid soil.

  • PDF

Development of Automatic Loading Equipment of Seedling Tray for Automatic Process of Raising Seedlings in Plant Factory (식물공장 육묘공정 자동화를 위한 육묘트레이 자동적재장치 개발)

  • Park, Sang-Min;Min, Young-Bong;Lee, Gong-In;Kim, Dong-Ouk;Kang, Dong-Hyun;Moon, Sung-Dong
    • Journal of agriculture & life science
    • /
    • v.45 no.5
    • /
    • pp.105-113
    • /
    • 2011
  • This study was carried out to develop an automatic loading equipment that can load seedling trays on loading position of the seedling bed driving on enclosed-type rail installed for interconnecting each process of raising seedlings in plant factory. The experiment of transferring the seedling tray by monorail pusher was carried out to figure out the required transfer force and problems during push type device of transporting the plastic seedling trays, that has completed its sowing process, which are installed onto the board of different materials. From the results of this experiment, the loading equipment which can exactly load three of the seedling trays orderly on the loading position of the seedling bed was designed and made. When three sowed trays on every board are transferred by pusher with the speed is at 30 cm/s, the maximum peak transfer force with maximum overshooting at initial transient state and the maximum transfer force at stead state are were respectively 32.8 N, 29.4 N on rubber board, 29.7 N, 22.5 N on a wooden board, 26.9 N, 19.6 N on a acrylic board, and 27.6 N, 19.1 N on an iron board. Changes in the transfer force occurred its maximum at the moment when the pusher collided with the tray, after the collision gradually decreased until it became stable. When two or three trays placed it in order of widthwise are transferred, it is occurred the overlapping of the tray's external bracket. The developed automatic loading equipment with PLC controller did not make any operation error through 100 times of tests, its maximum seedling tray loading speed was 2 sec/tray and its maximum error of transferred location of the tray was 0.5 cm.

Cooling Effect of Air in Greenhouse Using A Fog Sprayer Consisted of Two-fluid Nozzle with Turbo Fan (터보 팬 2류체 노즐로 구성한 포그 분무장치를 이용한 온실 내 공기의 냉각 효과)

  • Kim, Tae-Kyu;Min, Young-Bong;Kim, Do-Wan;Kim, Myung-Kyu;Moon, Sung-Dong;Chung, Tae-Sang
    • Journal of agriculture & life science
    • /
    • v.46 no.3
    • /
    • pp.119-127
    • /
    • 2012
  • For the promotion of the evaporative cooling efficiency of hot air in greenhouse in summer, a fog sprayer consisted of a high volume spraying two-fluid nozzle with turbo fan and a blowing fan was set up at 2.2 m height from bottom of small glass greenhouse and tested to estimate the possibility of the greenhouse cooling. The mean droplet size and the volume sprayed by one of fog sprayer were $29{\mu}m$ and $160m{\ell}/min$. All the droplets sprayed and blown by the fog sprayer were evaporated within 2 m radius. The result from the cooling test that two sprayers set up in glass greenhouse of plane area $228m^2$ was represented lower cooling effect that the temperature and relative humidity of inside air of greenhouse were $28.8^{\circ}C$ and 87.5% when those of outside air of greenhouse were $30.2^{\circ}C$ and 81.2%. Through investigation of literatures and results of the cooling test, it was estimated that the water spraying rate of evaporative cooling of single span greenhouse with 50% light curtain and with air change rate of 1 volume/min was $10m{\ell}/min/m^2$ so that the inside air temperature may cool down $2{\sim}3^{\circ}C$ on the basis of $35^{\circ}C$ atmospheric temperature in summer of south korean area.

Effect of Soil Mulching Materials and Methods on Weed Occurring for the Growth and Flowering in Gypsophila paniculata Cultivation (토양피복에 따른 잡초발생과 안개초의 생육 및 개화에 미치는 영향)

  • Cheong, Dong-Chun;Oh, Jeong-Moon;Lim, Hoi-Chun;Song, Young-Ju;Kim, Jeong-Man
    • FLOWER RESEARCH JOURNAL
    • /
    • v.19 no.1
    • /
    • pp.15-21
    • /
    • 2011
  • This study investigated the effect of soil mulching materials and methods on weed occurring for the growth and flowering characteristics in Gypsophila plants cultivation. For mulching materials were used black polyethylene (PE) film, black polypropylene (PP), and green polypropylene, and these were mulched in both ridge and furrow (BRF) or only furrow, respectively. The weed was occurred total $146.2g/m^2/yr$ as dry weight in non-mulching, but $4.1{\sim}4.2g/m^2/yr$ in BRF mulching by black or green PP. Also weed control were yearly required 27.9 persons/10a in non-mulching, whereas 2.4 persons/10a in BRF mulching by black or green PP. Flower budding and blooming were roughly delayed in non-mulching and furrow mulching. Flowering characteristics such as flower stalk length, primary branches number, and stem firmness were remarkably improved in BRF mulching of black or green PP. Cut flower yield was increased on black BRF mulching or green PP in summer cultivation, while green PP BRF mulching showed better yield in in autumn cultivation. Mortality rate of Gypsophila plants after summer season was lowest as 12.4% in furrow mulching with black PP, followed by about 19.0% in green PP mulching, but highest as 39.0% in BRF mulching with black PE film. Rosette formation rate was lower in furrow than BRF mulching, and was lowest as 13.1% in BRF mulching with green PP, followed by 15.2~15.8% in BRF mulching with black PE film or black PP. So it was thought that BRF mulching with green PP was highly effective in weed control and improvement of yield and cut flower quality in Gypsophila plants cultivation.

Estimation of Precipitable Water from the GMS-5 Split Window Data (GMS-5 Split Window 자료를 이용한 가강수량 산출)

  • 손승희;정효상;김금란;이정환
    • Korean Journal of Remote Sensing
    • /
    • v.14 no.1
    • /
    • pp.53-68
    • /
    • 1998
  • Observation of hydrometeors' behavior in the atmosphere is important to understand weather and climate. By conventional observations, we can get the distribution of water vapor at limited number of points on the earth. In this study, the precipitable water has been estimated from the split window channel data on GMS-5 based upon the technique developed by Chesters et al.(1983). To retrieve the precipitable water, water vapor absorption parameter depending on filter function of sensor has been derived using the regression analysis between the split window channel data and the radiosonde data observed at Osan, Pohang, Kwangiu and Cheju staions for 4 months. The air temperature of 700 hPa from the Global Spectral Model of Korea Meteorological Administration (GSM/KMA) has been used as mean air temperature for single layer radiation model. The retrieved precipitable water for the period from August 1996 through December 1996 are compared to radiosonde data. It is shown that the root mean square differences between radiosonde observations and the GMS-5 retrievals range from 0.65 g/$cm^2$ to 1.09 g/$cm^2$ with correlation coefficient of 0.46 on hourly basis. The monthly distribution of precipitable water from GMS-5 shows almost good representation in large scale. Precipitable water is produced 4 times a day at Korea Meteorological Administration in the form of grid point data with 0.5 degree lat./lon. resolution. The data can be used in the objective analysis for numerical weather prediction and to increase the accuracy of humidity analysis especially under clear sky condition. And also, the data is a useful complement to existing data set for climatological research. But it is necessary to get higher correlation between radiosonde observations and the GMS-5 retrievals for operational applications.

Application of MODIS Aerosol Data for Aerosol Type Classification (에어로졸 종류 구분을 위한 MODIS 에어로졸 자료의 적용)

  • Lee, Dong-Ha;Lee, Kwon-Ho;Kim, Young-Joon
    • Korean Journal of Remote Sensing
    • /
    • v.22 no.6
    • /
    • pp.495-505
    • /
    • 2006
  • In order to classify aerosol type, Aerosol Optical Thickness (AOT) and Fine mode Fraction (FF), which is the optical thickness ratio of small particles$(<1{\mu}m)$ to total particles, data from MODIS (MODerate Imaging Spectraradiometer) aerosol products were analyzed over North-East Asia during one year period of 2005. A study area was in the ocean region of $20^{\circ}N\sim50^{\circ}N$ and $110^{\circ}E\simt50^{\circ}E$. Three main atmospheric aerosols such as dust, sea-salt, and pollution can be classified by using the relationship between AOT and FF. Dust aerosol has frequently observed over the study area with relatively high aerosol loading (AOT>0.3) of large particles (FF<0.65) and its contribution to total AOT in spring was up to 24.0%. Pollution aerosol, which is originated from anthropogenic sources as well as a natural process like biomass burning, has observed in the regime of high FF (>0.65) with wide AOT variation. Average pollution AOT was $0.31{\pm}0.05$ and its contribution to total AOT was 79.8% in summer. Characteristic of sea-salt aerosol was identified with low AOT (<0.3), almost below 0.1, and slightly higher FF than dust and lower FF than pollution. Seasonal analysis results show that maximum AOT $(0.33{\pm}0.11)$ with FF $(0.66{\pm}0.21)$ in spring and minimum AOT $(0.19{\pm}0.05)$, FF $(0.60{\pm}0.14)$ in fall were observed in the study area. Spatial characteristic was that AOT increasing trend is observed as closing to the eastern part of China due to transport of aerosols from China by the prevailing westerlies.

Accepting Method in Classical Literature and Education ; Past, Present, and Future (고전문학의 향유방식과 교육; 과거, 현재, 미래)

  • Son, Tae-do
    • Journal of Korean Classical Literature and Education
    • /
    • no.37
    • /
    • pp.5-45
    • /
    • 2018
  • Today, in the case of literary works such as modern poetry, novels, 'literature production : literature acceptance' are relatively simple as 'writing : reading'. However, in classical literature, there are ways of 'singing, chanting, narrating, performing, public reading, writing : listening, reading.' Modern literary works such as poetry and novels are sole arts made up only of literature, but classical literature have many complex arts accompanied by music, theater, etc. In order to understand the way classical literature, it is necessary to consider music, theater, etc. also. There are a number of subjects to research today in relation to the accepting method of classical literature. There are such things at Hyang-ga (향가), Goryeo Sog-yo (고려속요), Sijo (시조) and Gasa (가사) in of classical poetry. There is a public reading in classical novels. There is securing video materialㄴ for narrators in oral literature. And there are Si-chang (시창. 詩唱) and aloud reading in chinese proses. 'Listening literature', such as the oral literature needs to have the A. Lord's 'formular theory' - 'formular' (general words), 'themes' (general subject), and 'improvisation.' It is the opposite of contemporary poetry and novels that value ' special words', 'special contents', and 'original text.' Classical literature with a great deal of 'listening literature' besides ' reading literature' needs to have this 'formular theory' too basically. In the case of 'excessive pornographic' oriented events in Goryeo Gayo (고려가요) and Pansori (판소리), a vision is required to set up a space for the realization of literature. The haman basic elements like a man and woman's body subject can be evoked as a literature means at open place for anonymous people. Unlike modern poetry and novels, which are 'reading literature', and contain only literature, classical literature have 'listening literature' besides 'reading literature', and have complex arts - classical poetry (literature and music), and oral literature (literature, music, theater etc.) These aspects are available to research modern mass media literature, which are all 'listening literature,' and all complex arts - pop songs (literature and music), movies (literature, drama, image, music etc.) and TV dramas (literature, drama, image, music etc.). Thus, a proper understanding and consideration of the accepting method is very important in understanding, researching and educating classical literature.

Evaluation of the Usefulness for VMAT of multiple brain metastasis using jaw tracking (Jaw tracking을 이용한 다발성 뇌 전이의 용적세기조절회전치료에 대한 유용성 평가)

  • Kim, Tae Won;Yoo, Soon Mi;Jeon, Soo Dong;Yoon, In Ha;Back, Geum Mun
    • The Journal of Korean Society for Radiation Therapy
    • /
    • v.30 no.1_2
    • /
    • pp.73-81
    • /
    • 2018
  • Purpose : The aims of this study were to compare and assess the effectiveness of Volumetric Modulated Arc Therapy(VMAT) using jaw tracking(JT) and fixed jaw(FJ) in radiation therapy of multiple brain metastasis. Methode and material : Among the patients with Multiple Brain Metastasis treated with jaw tracking, 10 patients with more than 6 tumors and with the size of radiation field $14{\times}14cm^2$ or more were included. Each Treatment plans with jaw tracking(JT) and fixed jaw(FJ) was established with Eclipse (Ver. 13.6 Varian, USA). Gamma Index (3 mm, 3 % confidence interval - 95 %) and maximum dose difference were measured with an electronic portal imaging device(EPID). The $D_{max}$ and $D_{mean}$ of Organ At Risk(OAR) were assessed and compared, and the Conformity Index(CI) and Homogeneity Index(HI) were evaluated. Result : Evaluating jaw tracking(JT) and fixed jaw(FJ) outcomes, in all cases, Gamma Index met the permissible standard of 3 mm, 3 % confidence intervals of 95 %. The maximum dose difference value from the areas with leaf end transmission was measured at a maximum of 98.4 % and an average of 43.6 % in clockwise(CW), and 67.9 % and 41.0 % for each in Counter-Clockwise(CCW). With jaw tracking, the maximum value of $D_{max}$ for each normal organ in OAR decreased in 15.36 %~74.59 % with the average value decreasing in 2.84 %~39.80 %. The maximum value of $D_{mean}$ in OAR decreased in 27.90 %~65.23 %, with the average value decreasing in 7.70 %~41.71 %. No change has been found in Conformity Index and Homogeneity Index values. Conclusion : When Jaw tracking is used in treating patients with multiple brain metastasis with VMAT, the unnecessary exposure due to leakage and transmission of radiation in unspecified areas was reduced, without affecting the dose distribution of the planning target volume(PTV), and the availability of radiation therapy with lower doses in normal organs is expected.

  • PDF

The variability of 6-D Skull Tracking(6DST) in Cyberknife for Bone metastasis patients (사이버나이프 6-D Skull Tracking의 유용성 평가)

  • Lee, Geon Ho;Bae, Sun Myeong;Song, Heung Kwon;Baek, Geum Mun
    • The Journal of Korean Society for Radiation Therapy
    • /
    • v.30 no.1_2
    • /
    • pp.41-47
    • /
    • 2018
  • Purpose : The purpose of this study is to evaluate the usefulness of 6 Dimensional Skull Tracking(6DST) in Cyberknife Stereotactic Body Radiation Therapy(SBRT) for the first and second cervical vertebrae(C1 and C2) metastasis. Methode and material : The Computed Tomography (Lightspeed VCT 64, General Electric Co. Waukesha, WI, USA) was used to acquire the CT images of the 9 patients with cervical vertebrae(C1 and C2) metastasis. Treatment plans for Xsight spine tracking and 6 Dimensional skull tracking were established with planning system (Multiplan system Version 4.6, Accuray, US). The results of XST and 6DST for each patient were analyzed with Microsoft Excel 2010. Result : The Maximum offsets of XST for C1 were 0.9 mm in Y(supero-inferior), 0.9 mm in Z(antero-posterior), 0.7 mm in X(left-right) direction, and rotations were and 1.0 degrees roll, 1.0 degrees pitch and 1.2 degrees yaw. The Maximum offsets of 6DST for C1 were 0.7 mm, 0.7 mm, 0.9 mm and $1.0^{\circ}$, $1.0^{\circ}$, $1.2^{\circ}$ for Y, Z, X and Roll, Pitch, Yaw. The Maximum offsets of XST and 6DST for C2 were 0.7 mm, 0.7 mm, 0.8 mm and $0.9^{\circ}$, $1.0^{\circ}$, $1.8^{\circ}$, and 0.9 mm, 0.7 mm, 0.9 mm and $0.9^{\circ}$, $0.9^{\circ}$, $1.0^{\circ}$ for Y, Z, X and Roll, Pitch, Yaw, respectively. Conclusion : XST and 6DST showed identical results for translations and rotations within the tolerance. It is possible to simplify the treatment time and procedure by using the 6DST. Therefore, 6DST is very useful methode with XST among the various tracking methods in Cyberknife for the patients with C1, C2 vertebral metastasis.

  • PDF