• Magazine of the Korea Concrete Institute
• /
• v.4 no.1
• /
• pp.119-126
• /
• 1992

AC] 318-H9 Recommended that when the specified compressive strength of concrete in a column is greater than 1. 4 times that specified for a floor system, top surface of the colurrm concrete shall extend 2ftU;OOrrun) into the slab from the face of colUlml to avoid unexpected brittle failure. The purpose of this investigation is to suggest the basic information for the structural safety, The major variables are com preSSlve strength of concrete, shear confinement ratio, and loading types. The test results showed that the load capaCIty of speCImen subjected to monotOI1lC loading had more than that of specimen subjected to one way cyclic loading. The failure modes of specimens under cyclic loading were concentrated at 5-20cm apart region from beam-column joint face and ductility index are increased with increasing of shear confinement ratio. Keywords: ACI 318-89, High and Low Strength Concrete, Beam-Column Joint, Shear Confinement Ratio, Loading Type, Ductility Index, Extension Distance.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.48-50
• /
• 2010

Stommel(1948)은 서안경계류의 원인이 베타효과($\beta$-effect)라 일컫는 코리올리 파라미터(f)의 위도 변화 때문인 것을 밝혔다. 서안경계류는 고등학교나 대학 교양에서 중요하게 다뤄지고 있다. 학생들은 보통 이론 수업만으로 서안경계류의 발생 과정, 이에 관련된 코리올리 힘, 베타효과 등을 이해해야 한다. 때문에 서안경계류와 관련된 실험이 있다면 이를 이해하는 데 큰 도움이 될 것이다. 또한 연구에서 검토한 6종의 고등학교 지구과학 2 교과서는 서안경계류를 본문과 더불어 삽화로 설명하고 있다. 그러나 이 중 3종의 교과서 삽화에서는 서안경계류의 발생 원인을 코리올리 힘만으로 지적하고 있다. 따라서 일부 학생은 서안경계류의 원인을 코리올리 힘으로 오해 할 수 있다. 위와 같은 이유로 우리는 서안경계류가 코리올리 힘의 작용과 베타효과에 의해 나타나는 것을 쉽게 확인 할 수 있는 실험 장치와 다양한 실험 방법을 개발하였다. 개발한 실험 장치는 직육면체의 수조와 회전 속도를 조절할 수 있는 테이블로 구성된다. (Fig. 1) 이와 같은 회전수조는 대기와 해양의 움직임을 실험실에서 모사하기 위해 자주 사용되었다(Beardsely 1969, 소선섭 등 1995; 1997). 우리의 수조는 경사진 바닥과 평평한 바닥으로 두종류를 제작하였다. 바닥이 경사진 수조는 베타효과를 구현하기 위한 것이다. 반시계 방향으로 회전하는 테이블은 중위도 어떤 위도에 접하는 가상의 평면이 지구 자전에 의해 회전하는 것을 나타낸다. 그리고 수조 상부에는 회전원판을 물에 접하여 시계방향으로 회전시킨다. 회전원판은 북반구 중위도 해양에 작용하는 바람 응력을 나타낸다. 우리는 테이블의 회전유무와 바닥의 경사유무에 따라 4개 실험을 수행하였다(Table. 1). 각 실험에서 물을 채운 수조를 원판에 올려놓고, 회전원판을 작동시킨 후 20분 동안 그대로 두어 수조안의 미세규모의 운동을 최소화 시킨 후 잉크를 떨어뜨리고 관찰하였다. 그 결과 실험 SB_f1은 베타효과와 코리올리 힘이 존재하여 서쪽 경계에서 좁고 빠른 흐름을 만들고 수조의 중간 부근에서 경계를 벗어나 동쪽으로 향하고 있다. 이 모습은 실제 해양의 서안경계류의 분리 현상과 비슷하다. FB_f1은 코리올리 힘만 존재하여 서쪽 경계에서 좁고 빠른 순환과 경계를 벗어나 동쪽으로 분리되는 흐름이 나타나지 않으며 전반적으로 크게 회전하는 모습을 보인다. SB_f0은 바람의 응력만 존재하는 경우로 잉크가 확산하는 모습을 보이며 나선팔의 모양으로 회전하면서 넓게 퍼져나간다. FB_f0의 모양도 이와 비슷하게 나타난다. 실험 SB_f1과 FB_f1을 비교하여 서안경계류는 코리올리 힘의 위도변화 효과인 베타효과가 있을 때 발생한다는 것을 알 수 있다(Fig. 2). 이 결과는 "단순히 코리올리 효과에 의해 서안경계류가 발생한다"는 생각을 바꾸게 할 것이다. 덧붙여 서안경계류 분리와 수조 바닥의 경사의 관계를 살펴보기 위한 실험을 실시하였다. 경사가 더 급하면 ($\alpha=20^{\circ}$) 서쪽 경계를 벗어나는 지점이 좀 더 북쪽에 나타났다. 현재 서안경계류는 개발한 실험 장치와 방법을 학교 현장에 적용하여 그 교육적 활용 가치를 평가하는 연구를 진행하고 있다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.180-186
• /
• 2016

There are many apartment buildings with the government's policy of increasing the supply of residential houses in Korea. Roughly 60% of the Korea population are living in apartment buildings. Since the 1970s, the Korean economy has grown enormously, the economic and social structure was radically transformed to industrialization and urbanization step. A village has grown into a large town in Korea and apartment buildings was constructed to solve national housing shortage by the Korean government and the construction company. Since the 2000s, this apartment buildings which was built in the 1970s and 1980s had become gradually deteriorated. So, reconstruction and remodeling project of apartment buildings have been come into request in Korea. There are two way to improve the residential environment. The one is remodeling of apartment buildings and the other is reconstruction of that. Therefore, we carried out questionnaire and survey study of the preference on the reconstruction and remodeling of old aged apartment which were located in daejeon province. As a result, the preference rate of remodeling is increasing instead of reconstruction because reconstruction of apartment buildings takes more money and needs long construction period.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.103-110
• /
• 2011

This study is to comparatively analyze the characteristics of pH decrease in recycled fine aggregates for embankment and landfill produced from waste concrete by using natural process and artificial process. The result was as follows In case of recycled fine aggregates left outdoor, it was found that pH level was decreased if the thickness of embankment becomes thinner, or the materials left outdoors owing to high concentration of $CO_2$ in atmosphere caused by respirations of people. When the air was permeated, pH level was decreased more effectively. It was analyzed that this phenomenon was caused by efficient supply of $CO_2$ in the recycled fine aggregates owing to high-pressure ventilators. In case of water spraying treatment, sprayed water facilitated hydration of unhydrated cement to dissolve calcium hydroxides which neutralized $CO_2$ in the atmosphere during desiccation process and decrease pH level by a considerable margin. In case of Immersed treatment, decrease of pH was not sufficient. When facilitating the supply of $CO_2$, pH level of the recycled fine aggregates was decreased by the largest margin. It was analyzed that this phenomenon was caused by efficient supply of $CO_2$. From the above results, it was analyzed that the most effective method of reducing pH level of the recycled fine aggregates from the aspects of pH reduction performance, economic efficiency and workability was repeated wet-dry cycles of spraying water to the aggregates in the proportion of 1:0.5 by weight and then treating by forcefully blowing $CO_2$ gas into the aggregates.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.2
• /
• pp.64-69
• /
• 2006

Cathode materials of Al-doped $Li(Ni_{1/3}Co_{1/3}Mn_{1/3-x}Al_x)O_2$ (x=0.0, 0.005, 0.01 0.05) for lithium ion batteries were synthesized with ultra-sonic spray pyrolysis method and single-step heat treatment. No secondary phases were found in all synthesized powders. The intensity ratio of $I_{003}\;to\;I_{104}$, however, slightly decreased and the particle size increased with the Al contents. The cells with bare, 0.5 and 1.0 at% Al-doped powders showed the initial discharge capacities of 182, 180 and $184mAhg^{-1}$ in a voltage range of $3.0\sim4.5V$ at 1C rate, and the capacity retentions of 81, 77 and 78% at the end of 30 cycles, respectively. But in the voltage range of $3.0\sim4.6V$, the Al-doping significantly enhanced the cycle stability. For example, the discharge capacity after 50 cycles was maintained to 70% in the 0.5 at% Al-doped sample compared to only 30% in no doped sample. The improvement of the cycle stability was thought to be due to $Mn^{3+}$ ion decrease as the Al doping from the XPS analysis results.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.2
• /
• pp.89-94
• /
• 2006

Nafion/poly(ether(amino sulfone)) acid-base blend polymer electrolyte membranes were prepared and their proton conductivity and dimethyl ether permeability were investigated. Characteristics of direct dimethyl ether fuel cell (DDMEFC) performance using prepared blend membrane were studied. The increase of amine groups in the base polymer in composite membranes resulted in the decrease in dimethyl ether permeability. The proton conductivity of the blend membranes gradually increased as increasing temperature. The conductivity of Nafion/PEAS-0.6 (85:15) blend membranes was measured to be $1.42\times10^{-2}S/cm\;at\;120^{\circ}C$ which was higher than that of the recast Nafion. The performance of direct dimethyl ether fuel cell (DDMEFC) using the Nafion/PEAS blend membranes was higher than that using $Nafion^(R)115$ membrane. Enhanced performance of direct dimethyl ether fuel cells using Nafion/PEAS blend membrane was explained by reducing dimethyl ether (DME) crossover through the electrolyte membrane and maintenance of the proton conductivity at high temperature.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.4
• /
• pp.224-231
• /
• 2000

The exfoliation of graphite (layer) was progressed due to the irreversible insertion of PC molecules between graphene layers, when propylene carbonate (PC) solvent was used as the organic solvents. The problem could be mitigated by the replacement of PC by ethylene carbonate (EC). But, the freezing point of EC-based electrolyte increased due to the high freezing point of $EC(36.2^{\circ}C)$. Therefore, EC+PC mixed electrolyte is expected as a good organic electrolyte for lithium ion battery. The EC-based organic electrolyte containing PC within pertinent quantity can be expected to have high molar conductivity and reduced exfoliation of graphite layer. The dielectric constant and molar conductivity of $LiPF_6/PC+EC+DEC$ electrolyte was investigated with a variation in the PC content. The electrochemical properties of carbon electrode in the electrolyte were also investigated. Molar conductivity and dielectric constant increased linearly by increasing the PC volume fraction in the electrolyte. The results of charge-discharge test for carbon/electrolyte/Li cell indicated that the initial irreversible specific capacity(IIC) of MCMB-6-28s and MPCF3000 decreased by the addition of $0.83 vol\%$ of PC, but increased with PC content over than $0.83 vol\%$. In the case of MPCF3000 and PCG100 having less than $10 vol\%$ PC, IIC was lower than 50 mAh/g. The discharge specific capacities varied with carbon material, but did not vary with PC content in the electrolyte.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.3
• /
• pp.169-173
• /
• 2003

Electrochemical capacitor made with metal oxide electrode uses rapid and reversible protonation/deprotonation of metal oxide material under the aqueous acidic solution, generally. Electrochemical stability window of aqueous electrolyte-type capacitor is narrow compared to that of organic electrolyte-type capacitor. Electrochemical characteristics of electrochemical capacitor made with metal oxide electrode and lithium or ammonium cation based organic electrolyte were evaluated. Electrochemical capacitor based on $RuO_2$ electrode material and 1M $LiPF_6$ in mixed solvents of EC, DEC, and EMC has anodic and cathodic specific capacitance of 145 and $142F/g-RuO_2{\cdot}nH_2O$, respectively, by using cyclic voltammetry with scan rate of 2mV/sec $g-RuO_2$ in potential range of $2.0\~4.2V(Li|Li^+))$.

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.97-105
• /
• 2001

In many cases of orthodontic treatment the upper anterior teeth are retracted. Periodontal problems may arise during incisor retraction, if the amount of tooth movement and the amount of remodeling in the anterior cortical bone are not the same. Therefore in this study, to find out the relationship between the amount of tooth movement and the amount of bone remodeling during retraction of the upper anterior teeth, lateral cephalograms of 56 female patients over 18-year-old were taken before and after treatment. Among the 56 patients, two groups were divided according to the type of root movement during retraction. 26 patients mainly moved by tipping and 30 by bodily movement. The cephalograms taken before and after treatment were superimposed upon the true horizontal plane. In the Tip-Group, the horizontal bone remodeling/tooth movement ratio was 1:1.63, and in the Torque-Group it was 1:1.66. Because the amount of tooth movement and the amount of bone remodeling were not the same in both groups, in the Tip-Group the root apex moved away from the palatal cortical plate and closer to the labial cortical plate, whereas in the Torque-Group the root moved away from the labial cortical plate and closet to the palatal cortical plate. Therefore, there are limitations in the amount of incisor retraction in patients with a very thin anterior cortical plate in the maxilla, and in patients with severe skeletal discrepancies orthognathic surgery should be considered and when orthodontic camouflage treatment is the only possible method, the orthodontist must be aware of the limitations of treatment.

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.197-203
• /
• 2004

Tweed-Merrifield directional force technology is a very useful concept, especially for the treatment of Glass II malocclusion. It has contributed to treating a favorable counter-clockwise skeletal change and balanced face, while head gear force using high pull J-hook (HPJH) in an appropriate direction is also essential to influence such results. Clinicians have encountered some problems concerning patients' compliance; however skeletal anchorage has been used widely of late because it does not necessitate patients' compliance, yet produces absolute anchorage. In this case, a good facial balance was obtained by Tweed-Merrifield directional force technology using HPJH together with skeletal anchorage, which provided anchorage control in the maxillary posterior area, torque control in the maxillary anterior area, and mandibular response. This indicates 4hat skeletal anchorage can be used to reinforce sagittal and vortical anchorage in the maxillary posterior area during the retraction of anterior teeth. The author used HPJH for torque control, Intrusion, and the bodily movement of maxillary anterior teeth during on masse movement. However, it is thought that such a result nay also be achieved by substituting mini- or microscrews for HPJH. Consequently, Tweed-Merrifield directional force technology using skeletal anchorage for the treatment of Class II malocclusion not only maximiaes the result of treatment but can also minimize patients' compliance.