• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.8
• /
• pp.577-584
• /
• 2016

UAV(Unmaned Aerial Vehicle), which is autonomous flight without pilots. Recently, UAV is being applied to various fields such as video recording, aerial photogrammetry. In particular, UAV is getting a lot of attention in the field of space-related information because of it's data acquisition speed and economic feasibility. But analytical study of an unmanned air-side technologies are lacking. In this study, the research of equipment for the unmanned aerial surveys and UAV technologies and trend analysis for generation of terrain model and ortho image effectively were performed. As a result, the ways to improve the utilization field of unmanned aerial surveying and processing of fixed-wing and rotary-wing unmanned aircraft. were suggested. If analytical research on generation of terrain models and ortho image will be performed, production efficiency of the geospatial information industry is expected to be significantly increased.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.474-480
• /
• 2019

We propose a method to evaluate a Modulation Transfer Function (MTF) using a circular target. In addition, a MATLAB GUI-based resolution analysis tool was developed to enhance the reliability of UAV image quality and the efficiency of the work. For this purpose, images were taken with an FC-6310 during flights at altitudes of 80 m, 120 m, and 150 m and by an iXM-100 at altitudes of 150 m, 200 m, and 400 m. The MTFs of UAV images were compared with traditional photogrammetry by measuring and analyzing MTFs on images taken by the UltraCAM Eagle Mark-2 sensor at a flight altitude of 1000 m. The results show that ${\sigma}MTF$ of the FC-6310 were 0.431(80 m), 0.524(120 m), and 0.699(150 m), and those of the iXM-100 were 0.332(150 m), 0.393(200 m), and 0.631(400 m), respectively. At the altitude of 150 m, the image quality of the iXM-100, which has a high-performance camera, was very high, and the effect of the camera performance on the image quality was confirmed. In addition, the ${\sigma}MTF$ of the UltraCAM Eagle Mark-2 was 0.711 due to the high flight altitude. This was the worst value among all UAV images. However, the ${\sigma}MTF$ of the FC-6310 at 150-m altitude was 0.699, which is almost the same as that of a manned aerial image.

• ICROS
• /
• v.20 no.4
• /
• pp.37-43
• /
• 2014

소형 무인항공기가 발달함에 따라 영상센서의 활용이 증가하였다. 특히 발전된 컴퓨팅 파워와 소형화된 영상센서의 발달로 무겁고 값비싼 레이더 장비의 기술을 영상센서로 구현하는 연구가 활발히 진행 중이다. 영상 이동표적표시(Moving Target Indication MTI) 기법은 이런 시대의 흐름에 따라 발달된 기술이며 현재 미군의 소형무인항공기 RQ-11 Raven에 상용화 되었다. 본 논문에서는 소형 무인항공기용 영상 MTI 기법의 원리를 설명하고 영상 MTI에서 주로 사용하는 카메라 운동 보 정 기법인 매개변수/비매개변수 방식의 영상정합의 접근법을 위주로 설명하였다. 또한 소형 무인항공기용 영상감시시스템 구현에서 가장 큰 문제점인 시차/항공기 진동 보정에 대한 진행 중인 연구논문도 소개하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.53-62
• /
• 2016

In recent years, UAV Photogrammetry based on an ultra-light UAS(Unmanned Aerial System) installed with a low-cost compact navigation device and a camera has attracted great attention through fast and accurate acquirement of geo-spatial data. In particular, UAV Photogrammetry do gradually replace the traditional aerial photogrammetry because it is able to produce DEMs(Digital Elevation Models) and Orthophotos rapidly owing to large amounts of high resolution image collection by a low-cost camera and image processing software combined with computer vision technique. With these advantages, UAV-Photogrammetry has therefore been applying to a large scale mapping and cadastral surveying that require accurate position information. This paper presents experimental results of an accuracy performance test with images of 4cm GSD from a fixed wing UAS to demarcate parcel boundaries in agricultural area. Consequently, the accuracy of boundary point extracted from UAS orthoimage has shown less than 8cm compared with that of terrestrial cadastral surveying. This means that UAV images satisfy the tolerance limit of distance error in cadastral surveying for the scale of 1: 500. And also, the area deviation is negligible small, about 0.2%(3.3m²), against true area of 1,969m² by cadastral surveying. UAV-Photogrammetry is therefore as a promising technology to demarcate parcel boundaries.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.3
• /
• pp.155-166
• /
• 2017

As the utilization of aerial images increases, a variety of software using unmanned aerial photogrammetric procedures as well as traditional aerial photogrammetric procedures are being provided. Previously, software that used the unmanned aerial photogrammetric procedure was used for images captured in small areas. Recently, however, software that uses unmanned aerial photogrammetric procedures for large-scale images taken by using aerial photogrammetric cameras has appeared. Therefore, this study generated ortho-images using aerial photogrammetry and unmanned aerial photogrammetry for large aerial images, and compared the features of both procedures through qualitative and quantitative comparisons. Experiments in the study area show that using the 3D mesh effectively removes the relief displacement of the building rather than using the digital surface model to generate ortho-images.

• Journal of the Society of Disaster Information
• /
• v.15 no.3
• /
• pp.427-439
• /
• 2019

Purpose: We generated geospatial information of unmanned aerial vehicle based on various SW and analyzed the location accuracy of orthoimage and DSM and texture mapping of 3D mesh. Method: The same unmanned aerial image data is processed using two different SW, and spatial information is generated. Among the generated spatial information, the orthoimage and DSM were compared with the spatial information generation results of the unmanned aerial photogrammetry SW by performing quantitative analysis by calculating RMSE of horizontal position and vertical position error and performing qualitative analysis. Results: There were no significant differences in the positional accuracy of the orthoimage and DSM generated by each SW, and differences in texture mapping in 3D mesh. The creation of the 3D mesh indicated the impact of the Unmanned Aerial Photogrammetry SW. Conclusion: It is shown that there is no effect of SW on the creation of orthoimage and DSM for geospatial analysis based on unmanned aerial vehicle. However, when 3D visualization is performed, texture mapping results are different depending on SW.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.4
• /
• pp.355-362
• /
• 2017

Recently, UAV(Unmanned Aerial Vehicle) have been utilized in various fields, including surveys, mapping, and spatial analysis, depending on the increase in demand for spatial information and UAV is receiving a lot of attention due to rapid data acquisition and economic viability. In this study, the applicability of UAV image images was analyzed for urban disaster prevention. UAV images were acquired for the study area and digital surface model and ortho image were generated through data processing. Also, the process using PPK(Post Processed Kinematic) GNSS method is compared with existing method. Through the research, it was able to effectively deploy urban disaster prevention information about the target area, and displayed the effectiveness of the methods for efficient comparison with existing unmanned aerial photogrammetry. If the PPK technique is applied to thethe disaster prevention field, it is expected that the work flow in the field of rapid data acquisition and disaster prevention data construction can be greatly improved.

• Journal of Aerospace System Engineering
• /
• v.13 no.2
• /
• pp.10-18
• /
• 2019

In this paper, we present the results of a developed LTE/Wi-Fi-based video transmission system which can be applied in small unmanned aerial vehicles of 25kg or less. The developed video transmission system comprised of airborne datalink terminal, ground datalink terminal, and used LTE and Wi-Fi wireless data communication technologies to transmit videos of resolution higher than HD (720p/30fps, 1080p/30fps) taken by small UAV. The airborne device is designed to efficiently transmit real-time streaming video through the incorporation of H.264 video processing board. Ground tests and evaluation indicated the possibility of the developed system to transmit real-time videos from close distance in regards to non-line-of-sight area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.1
• /
• pp.49-56
• /
• 2020

In this study, we analyzed the sharpness of UAV-images using the gradient formula and produced a MATLAB GUI (Graphical User Interface)-based sharpness analysis tool for easy use. In order to verify the reliability of the proposed sharpness analysis method, sharpness values of the UAV-images measured by the proposed method were compared with those by measured the commercial software Metashape of the Agisoft. As a result of measuring the sharpness with both tools on 10 UAV-images, sharpness values themselves were different from each other for the same image. However, there was constant bias of 011 ~ 0.20 between two results, and then the same sharpness was obtained by eliminating this bias. This fact proved the reliability of the proposed sharpness analysis method in this study. In addition, in order to verify the practicality of the proposed sharpness analysis method, unsharp images were classified as low quality ones, and the quality of orthoimages was compared each other, which were generated included low quality images and excluded them. As a result, the quality of orthoimage including low quality images could not be analyzed due to blurring of the resolution target. However, the GSD (Ground Sample Distance) of orthoimage excluding low quality images was 3.2cm with a Bar target and 4.0cm with a Siemens star thanks to the clear resolution targets. It therefore demonstrates the practicality of the proposed sharpness analysis method in this study.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.317-325
• /
• 2020

UAV (Unmanned Aerial Vehicle) photogrammetry has recently emerged as a means of obtaining highly precise and rapid spatial information due to its cost-effectiveness and high efficiency. However, current procedures or regulations for quantitative quality verification methods and certification processes for UAV-images are insufficient. In addition, the current verification method for image quality is not evaluated by an MTF (Modulation Transfer Function) analysis or edge response analysis, which can analyze the degree of contrast including image resolution, and only relies on the GSD (Ground Sample Distance) analysis. Therefore, in this study, the edge response analysis using a Slanted edge target was performed along with GSD analysis to confirm the necessity of analyzing edge response analysis in UAV-images quality analysis. Furthermore, a Matlab GUI-based software tool was developed to help streamline the edge response analysis. As a result, we confirmed the need for edge response analysis since the outputs of the edge response analysis from the same GSD had significantly different outcomes. Additionally, we found that the quality of the edge response analysis of UAV-images is proportional to the performance of the camera mounted on the UAV.