• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.21-24
• /
• 2009

This study deals with the application of USN wireless inclinometer sensor for earth retaining structure safety measurement, The application of wireless inclinometer sensor has great advantage about real-time monitoring of earth retaining structure, It allows a construction manager to monitor movement data from anywhere connected through internet during the process of excavation for substructures of buildings, To validate the applicability of the wireless inclinometer sensor. laboratory and field tests have been performed, The results have shown that the measured values of wireless inclinometer sensor represent the behavior of H-pile well, Both convenience of sensor installation and real-time monitoring of earth retaining structure are confirmed, The proposed wireless measurement system provides a good basis for exact measurement of temporary substructures, More measurements and application are expected for the other excavation sites with various conditions.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.12
• /
• pp.41-46
• /
• 2018

The wireless sensor network system has the advantage of confirming the behavior of the entire facility by improving the disadvantages of conventional monitoring system. As a result, it is widely proposed as safety diagnosis and measurement of structures, water management systems, and management systems for dam structures. However, there is a lack of research that can evaluate the condition of facilities such as safety at the same time as monitoring. In this study, it is proposed a wireless sensor network system which can evaluate the behavior characteristics of facilities and evaluate the safety status for improving the technical disadvantages on conventional monitoring system. The geotechnical risk factors for the reservoir dam facility were evaluated and the limit values for the risk factors causing the failure of the facility were set. In other words, the system was set up so that the risk factors can be measured and the limit status can be evaluated immediately for each factor. In this study, numerical analysis is carried out for seepage and slope stability analysis using the typical cross section for reservoir dams. The stress-porewater coupling finite difference numerical analysis is performed for establishing the limit displacement for reservoir dam structures. It is developed a system that can estimate the time to reach the critical value by regression analysis using the measured datas.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1793-1798
• /
• 2007

Recently there are some trends to construct smart home system infrastructure depending upon the development of Information and Communication Technology. Also requirements of the Ubiquitous Healthcare Systems at home which can monitor the status of health continuously are increased rapidly comparing with hospitals. Healthcare service can be divided into two categories. The first one is Alarm Service that can be used for the emergency status and the other one is Remote Support Service which can monitor the patient including home environments and give those diagnosis information to medical office or to his family. Generally wired networks and fixed healthcare measuring system have some limits to transmit reliable realtime based information for both categories described above comparing with portable monitoring system. Getting over the inefficiency we will design and implement portable healthcare system under the wireless Zigbee network environments.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.1-7
• /
• 2021

This study attempted to detect possible collapse and fire accidents in facilities for disaster monitoring of large facilities, and to develop a customized beacon to recognize the internal situation of an IoT-based facility when a disaster occurs. In the case of data measurement using the existing strain gauge sensor, the strain gauge sensor was connected by wire to measure it, but this study changed it to wireless so that the presence and absence of structural deformation can be monitored in real time. In this process, in order to use the Wheatstone bridge, a strain sensor module that can be connected to a customized beacon was manufactured, and a system configuration was conducted to remotely check the measurement data. To verify measurement data, 10 customized beacons and 2 gateways were installed on the 15th floor of the Advanced Institue of Convergence Technology, and as a result of analysis of measurement data, it was confirmed that the strain data values were distributed between 7 and 8.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.4
• /
• pp.149-160
• /
• 2008

In this study, the research was carried out on how to identify the modal parameter by acquiring the output response of the structure only through the smart sensor system. The objective of this research is to verify the performance and the on-site adaptability of the smart sensor system that have been actively researched as the advanced measuring system so far. Smart Sensor System was developed so that the real-time dynamic measurement can be performed by means of MEMS-type accelerated sensor, 8 bit CPU, wireless MODEM. In the modal parameter identification test, random excitation was added to the cantilever beam, and then the response of the structure was obtained using the smart sensor system and the wire measurement system respectively. In analyzing the data, modal parameter was identified using NExT & ERA algorithm. Furthermore, the optimal measurement location was selected through EOT algorithm in order to obtain the qualified output response. Result of the test, it was possible to verify the on-site applicability of the smart sensor.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.2
• /
• pp.97-106
• /
• 2019

Today, many smart sensor's measurement instruments are used to check the safety situation of various medium and large bridge structures that should be maintained in the construction facilities, but most of them use the method of measuring and confirming the displacement behavior of the bridge at regular intervals. In order to continuously check the safety situation, various measuring instruments are used, but most of them are not able to measure and measure the displacement and behavior of main construction structures at regular intervals. In this study, GNSS and environment smart sensors and drone's image data are transmitted to wireless network so that risk of many bridge's structures can be detected beforehand. As a result, by diagnosing the fine displacement of the bridge in real time and its condition, reinforcement, repair and disaster prevention measures for the structural parts of the bridges, which are expected to be dangerous, and various disasters and accidents can be prevented, and disaster can be prevented could suggest a new alternative.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.231-234
• /
• 2001

OBD-II regulations are already effective in many countries. The California Air Resources Board(CARB) first issued regulations in 1985 for the 1988 model year, known as OBD-I, and required the vehicle's engine management computer to warn the driver by means of a dash-mounted light if a malfunction occurred in either the oxygen sensor, the exhaust gas recirculation(EGR) valve or the evaporative emission system purge solenoid, and to store information on troubles that have no recurrent characteristics. This paper presents two methods of wireless monitoring OBD signal, which is one of the ECU output for self diagnostic measurement. RF module is used to monitor ECU's Self diagnostic signal remotely. Two kinds of measurement systems which are based on micro-controller(80C196KC) for portable detection and PC for sever are considered for receiving the RF signal. Therefore, possibility of real-time monitoring of ECU's self diagnostic signal remotely is verified on this paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.310-313
• /
• 2022

In the pipeline for supplying purified water to each household, measurements such as flow meters and pressure meters are installed at important points to monitor in real time. The measured data acquired to the central control room through wireless or wired communication, but data may not be acquired due to intermittent communication failures. Since then, even if the communication network is restored, data during the failure period is not stored on the site, or even if it is stored, data cannot be automatically stored in the database. Low cost with universally installed in the field in order to address these data logging by developing a module is compatible with PLC, automatically would like to make sure that we can recover in the database.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.151-152
• /
• 2010

In this paper, a weather field server is designed and developed for local area weather condition monitoring system. Weather field server consists of an integrated sensor board and wireless sensor node to enable quick response of changing weather conditions in the valley region. A server program is established to monitor and analyze real-time weather condition in order to detect and prevent weather damages occurring in the locality.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.283-284
• /
• 2016

본 논문에서는 다중 생체계측 장비를 CMCIS(Central Monitoring and Cardiology Information System) 기반의 통합 시스템에 연동하기 위한 내장형 MDEC 모듈을 소개하고 바이탈 사인 장비와 결합하여 무선 네트워킹을 통하여 원격지에 생체정보를 전송하는 시스템을 제안한다. 내장형 MDEC 모듈로 전송된 데이터는 실시간 뷰에 표시됨으로서 환자정보를 원격지에서 감시 및 관리할 수 있는 유효성을 가지게 된다. 본 연구의 결과는 CMCIS 기반의 통합 시스템을 구축하는 기반기술로 향후 효율적 의료서비스에 기여할 것으로 사료된다.