• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11C
• /
• pp.877-884
• /
• 2010

This paper presents a fast IP mobility management scheme in vehicular networks where multiple wireless network interfaces are used to perform the fast handover without packet loss and handover latency. In order to do that, the IETF standard HMIPv6 has been extended, where multiple simultaneous tunnels between the HMIPv6 MAP and the mobile gateway are dynamically constructed. The architecture for supporting multiple tunnels has been designed and both mathematical analysis and simulation using NS-2 have been done for performance evaluation.

• Journal of Korea Multimedia Society
• /
• v.12 no.10
• /
• pp.1478-1485
• /
• 2009

A sensor network which is composed of a large number of sensors that perform various sensing is applied in a variety of fields. The sensor networks can be widely used for various application area like as home automation, fire detection and security area. Development of new sensor to have appropriate functions and deployment of networks for suitable application are served actively. In this paper, we design and implement a system that monitors various factory facilities by deploying sensor network at a working place which threatens the worker's safety. A sensor node reports its sensing data like as temperature and humidity to monitor facilities to a sink node. And the server which is connect to the sink node gathers and provides information by user interface. In addition, digital data which are generated at a work place can be transferred via the sensor network to increase the efficiency of works. The proposed sensor network provides the convenience of working, since it is deployed at a garbage collection company to monitor a temperature and humidity of garbage and to transmit data about the weight of trucks which enters the company.

• The KIPS Transactions:PartC
• /
• v.12C no.2 s.98
• /
• pp.267-280
• /
• 2005

In this paper, we implement and verify XMIP integrating IETF Mobile IP and the Explicit Multicast mechanism for a great number of small group multicast communications. U a source node sends Xcast packets explicitly inserting destination nodes into the headers, each Xcast router decides routes and forwards the packets toward each destination node based on unicast routing table without the support of multicast trees. n is a straightforward and simple multicast mechanism just based on a unicast routing table without maintaining multicast states because of the inheritance from the Explicit Multicast mechanism. This research modifies and extends the functionality of IETF Mobile IP's mobility agents, such as HA/FA to HA+/FA+ respectively, considering interworking with Xcast networks. Xcast packets captured by HA+ are forwarded into X-in-X tunnel interfaces for each FA+ referred to the binding table of HA.. This X-in-X tunneling mechanism can effectively solve the traffic concentration problem of IETF Mobile IP multicast services. Finally WLAN-based testbed is built and a multi-user Instant messenger system is developed as a Xcast application for finally verify the feasibility of the implemented XMIP/Xcast protocols.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.4
• /
• pp.87-93
• /
• 2009

Wireless mesh networks (WMNs) are emerging technologies that provide ubiquitous environments and wireless broadband access. The aggregate capacity of WMNs can be improved by minimizing the effect of channel interference. The IEEE 802.11b/g standard which is mainly used for the network interface technology in WMNs provides 3 multiple channels. We must consider the channel scanning delay and the channel dependency problem to effectively assign channels in like these multi-channel WMNs. This paper proposes a cluster-based channel assignment (CB-CA) algorithm for multi-channel WMNs to solve such problems. The CB-CA does not perform the channel scanning and the channel switching through assigning co-channel to the inter-cluster head (CH) links. In the CB-CA, the communication between the CH and cluster member (CM) nodes uses a channel has no effect on channels being used by the inter-CH links. Therefore, the CB-CA can minimize the interference within multi-channel environments. Our simulation results show that CB-CA can improve the performance of WMNs.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.48-56
• /
• 2008

This study provides to car driver with car exhaust gas and sensor information which are car trouble code in engine and many sensors when the car has some problems. This is to provide car manager with many information of car sensors when we go to vehicle maintenance. For example, information of engine RPM, fuel system, intake air temperature, air flow sensors and oxygen sensors can provide to owner or garage, and also add to multimedia system for mp3 files and video files. This system consists of embedded linux system of low power while driving the car which uses OBD-II protocols and zigbee communication interface from CAN communication of car system to self-diagnosis embedded system of car. Finally, low power embedded system has a lot of application and OBD-II protocols for embedded linux system and CAN communication which get sensor informations of car control sensor system while driving the car.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12A
• /
• pp.950-958
• /
• 2011

This paper focuses in the implementation of mesh router supporting multi-path routing based on IEEE 802.11s. In HWMP of IEEE 802.11s, the single path routing just was defined. So, in this work, we implemented not only the single path routing defined in IEEE 802.11s, but also a multipath routing based on AOMDV which extended the standard. A multi-channel multi-interface technology that can transmit and receive simultaneously and lower bandwidth reduction caused by interferences than a single-channel single-interface was implemented in our mesh router. We also developed an outdoor test bed with the mesh routers. The bandwidth of the mesh router and a real-time video streaming service were verified using the test bed. And, the single path and multipath routing algorithms are also compared. In this test bed, The average TCP bandwidth was 23.77 Mbps and the latency was 2.4 ms in five hops. The test bed could service real-time streaming with an average jitter of 0.547 ms in five hops. The mesh router that used the multipath routing path reduced the path recovery time by 12.73% on average.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.461-467
• /
• 2003

This paper proposes the method of mobility implementation for location searching in the intelligence wireless ATM networks that expand and apply standard broadband signaling capabilities, and analyze the performance based on the numerical algorithm. The existing B-ISDN UNI protocol stack demands the location search mechanism to determine the location of mobile terminal in the wireless ATM networks because it use single protocol through the fixed PTP interface or PTM interface that don't support terminal mobility. The proposed method make possible the dynamic mobility at a part of wireless access by minimizing the signaling load without a falling-off in system performance by using the intelligence network technology according to the expansion of ATM and B-ISDN signaling integration based on the fixed networks. We implemented the performance analysis by MFC modeling based on numerical algorithm, and realized the efficiency of expenses by carrying out the comparative signaling performance evaluation to measure the relative gains of location search service in the intelligence wireless ATM system. The obtained results have the flexibility to operate in the public B-ISDN network environment without a change of existing B-ISDN/ATM NNI signaling reference to support the wireless ATM access system, and can easily expand to correspond to terminal mobility and various multimedia services in the next broadband PCS.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.377-386
• /
• 2003

In this paper, we present an application layer protocol to support secure wireless Internet services, called Application Layer Security(ALS). The drawbacks of the two traditional approaches to secure wireless applications motivated the development of ALS. One is that in the conventional application-specific security protocol such as Secure HyperText Transfer Protocol(S-HTTP), security mechanism is included in the application itself. This gives a disadvantage that the security services are available only to that particular application. The other is that a separate protocol layer is inserted between the application and transport layers, as in the Secure Sockets Layer(SSL)/Transport Layer Security(TLS). In this case, all channel data are encrypted regardless of the specific application's requirements, resulting in much waste of network resources. To overcome these problems, ALS is proposed to be implemented on top of HTTP so that it is independent of the various transport layer protocols, and provides a common security interface with security applications so that it greatly improves the portability of security applications. In addition, since ALS takes advantages of well-known TLS mechanism, it eliminates the danger of malicious attack and provides applications with various security services such as authentication, confidentiality integrity and digital signature, and partial encryption. We conclude this paper with an example of applying ALS to the solution of end-to-end security in a present commercial wireless protocol stack, Wireless Application Protocol.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.63-68
• /
• 2018

Offloading is a method of communicating, processing, and receiving results from some of the applications performed on local computers to overcome the limitations of computing resources and computational speed.Recently, it has been applied in mobile games, multimedia data, 360-degree video processing, and image processing for Internet broadcasting to speed up processing and reduce battery consumption in the mobile computing sector. This paper implements a viewer that enables users to convert various flat-panel images and view contents in a wireless Internet environment and presents actual results of an experiment so that users can easily understand the images. The 360 degree spherical image is successfully converted to a plane image with Double Panorama, Quad, Single Rectangle, 360 Overview + 3 Rectangle depending on the image acquisition position of the 360 degree camera through the interface. During the experiment, more than 100 360 degree spherical images were successfully converted into plane images through the interface below.

• Journal of Digital Contents Society
• /
• v.6 no.2
• /
• pp.131-135
• /
• 2005

Nowadays, the demand for the wireless technology has gradually increased to support the services of high speed wired internet and also the interest of a mobile terminal convergence has increased. In the next generation, the mobile terminal could merge with the celluar phone, wireless LAN, portable internet, digital multimedia brodcasting, mobile game and sensor(smart-tag and biometrics) through the unified single user interface. Moreover, the system is supported to multi-mode at difference networks, which have variable functions and high performance for available service. Inthis paper, we investigate the minimum requirements and the core technologies of the next generation mobile terminals.