• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.152-160
• /
• 2008

In this paper, we analyze the performance of a direct-conversion UHF RFID reader with the range correlation effects of the phase noise. Since a UHF RFIB system uses the same oscillator to generate the transmitted carrier and the local oscillation, the periodic interference and phase noise reduction effects occur due to time delay between two signals. Through exact theory and simulation, we verify how to cancel the periodic interference phenomena using I/Q diversity combining technique. And, we analyze phase noise reduction effects due to range correlation as a function of the tag-reader distance and the offset frequency Using these results, we simulate the symbol-error-rate performance with respect to phase noise with and without range correation effects. We show that the phase noise of the local oscillator has little effect on the symbol-error-rate performance because of phase noise reduction by range correlation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.895-902
• /
• 2014

This paper presents a 2-stage CMOS power amplifier for the 1.75 GHz band using a $0.18-{\mu}m$ CMOS process. Using ADS simulation, a power gain of 28 dB and an efficiency of 45 % at an 1dB compression point of 27 dBm were achieved. The implemented CMOS power amplifier delivered an output power of up to 24.8 dBm with a power-added efficiency of 41.3 % and a power gain of 22.9 dB. For a 16-QAM uplink LTE signal, the PA exhibited a power gain of 22.6 dB and an average output power of 23.1 dBm with a PAE of 35.1 % while meeting an ACLR(Adjacent Channel Leakage Ratio) level of -30 dBc.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.3
• /
• pp.19-30
• /
• 2009

Recent development in wireless communication technology and mobile equipment like PDA, cellular phone and GPS makes location-based services (LBSs) popular. However, because, in the LBSs, users continuously request a query to LBS servers by using their exact locations, privacy information could be in danger. Therefore, a mechanism for users' privacy protection is required for the safe and comfortable use of LBSs by mobile users. For this, this paper propose a grid-based cloaking area creation scheme supporting continuous LBSs. The proposed scheme creates a cloaking area rapidly by using grid-based cell expansion to efficiently support the continuous LBSs. In addition, to generate a cloaking area which makes the exposure probability of a mobile user to a minimum, we compute a privacy protection degree by granting weights to mobile users. Finally, we show from a performance analysis that our cloaking scheme outperforms the existing cloaking schemes, in terms of service time, privacy protection degree.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.22-32
• /
• 2013

Wireless Sensor Network(WSN) has attracted great interest recently and the necessity of ZigBee has appeared to standardize and apply the upper layer specification based on the IEEE 802.15.4 standard specification in industrial field. Currently, there are many studies about the IEEE 802.15.4/ZigBee communication channel. And it is subject of interest to analyze the performance in various channel environments. In this paper, we propose channel models through the analysis of the IEEE 802.15.4 radio wave propagation characteristics in various channel environments. Also, we have analyzed the performance of the IEEE 802.15.4/ZigBee for the standard of physical layer of 2.4GHz band in each channel environments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.75-82
• /
• 2009

This paper proposes a method which increases the linearity using an improvement mechanism of Doherty power amplifier and compensates the decrement of efficiency due to improvement of linearity. To verify the method, a 20W power amplifier is designed and implemented. Compared with 2-way Doherty power amplifier, the implemented 3-way Doherty power amplifier with class F shows improved linearity about 10dBc and efficiency about 1.5%. Also, efficiency characteristic has been improved about 3.5% compared with the 2-way Doherty power amplifier while maintaining linearity. This results show that the proposed 3-way Doherty power amplifier with class F is shown to be adequate for improvement of efficiency and linearity. It is expected that the proposed amplifier can be used for various wireless communication system amplifiers.

• Journal of the Korea Society for Simulation
• /
• v.17 no.3
• /
• pp.1-8
• /
• 2008

It is essential to maintain constant QoS despite of cell overload or erroneous wireless link during transmission because QoS of a multimedia service may be severely degraded by small delay or packet loss. This paper deals with a cell selection method for supporting the QoS of multimedia services over heterogeneous networks. The proposed scheme is based on Fuzzy Multi-Criteria Decision Making (FMCDM), in which uncertain parameters such as user system preference, the communication cost and cell load, and the transmission delay are used in the decision process using the aggregation function in fuzzy set theory. In this scheme, errors in the evaluation parameters impose milder changes on the total evaluation value than in binary logics. Simulation is focused on the average delay and packet loss rate, and the simulation results show that our proposed method provides mobile terminals the optimal performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1180-1187
• /
• 2012

In this paper, joint transmission space division multiple access(JT-SDMA) scheme is proposed to mitigate inter-cell interference(ICI) in cooperative wireless communications system with limited feedback. We propose a systematic design method for a codebook consisting of a finite number of unitary matrices suitable for network multiple-input multiple-output( MIMO) channel characteristics. A centralized cluster scheduling scheme is proposed to both mitigate ICI and maximizes multiuser diversity gain with limited feedback. It is shown that the proposed JT-SDMA scheme outperforms a existing coordinated SDMA scheme even in wireless network environments where sufficient multiuser diversity order can not be provided through efficient ICI mitigation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.953-958
• /
• 2015

Raspberry Pi is a credit card-sized computer with support for a large number of input and output peripherals. This makes it the perfect platform for interaction with many different devices and for usage in a wide range of applications. When combined with Wi-Fi, it can communicate remotely, therefore increasing its suitability for the construction of wireless sensor nodes. In addition, data processing and decision-making can be based on artificial intelligence, what is performed in developed testbed on the example of monitoring and determining the confidence of fire. In this paper, we demonstrated the usage of Raspberry Pi as a sensor web node for fire-safety monitoring in a building. When the UV-flame sensors detect a flame as thin as that of a candle, the Raspberry Pi sends a push-message to notify the assigned smartphone of the on-site situation through the GCM server. A mobile app was developed to provide a real-time video streaming service in order to determine a false alarm. If an emergency occurs, one can immediately call for help.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.7 no.1
• /
• pp.89-96
• /
• 2005

Due to fast development of digital equipments, various information techniques have been applied to the tunneling and a decision aid system based on IT has also been used during excavation stage. A PDA based informative tunneling method is, therefore, studied in this paper and the decision aids for tunneling using digital face mapping data as well as geologic information in terms of digital data is developed. For this, wireless network, mobile computer, CDMA and digital camera have been combined to generate the digital map of the tunnel face and reinforcement or excavation pattern can be estimated based on digitalized geologic conditions. Future studies will be concentrated on the enhancement of the PDA S/W so that reinforcement method as well as the amount of reinforcements can also be stored in the same DB. Furthermore, field application of the S/W will be undertaken and a virtual reality technique will also be introduced to visualize all the tunneling work on the computer monitor.

• The Journal of the Korea Contents Association
• /
• v.7 no.12
• /
• pp.333-345
• /
• 2007

In the recent years, the companies have manually recorded a production status in a work diary or have mainly used a bar code in order to collect each process's progress status, production performance and quality information in the production and logistics process in real time. But, it requires an additional work because the worker's record must be daily checked or the worker must read it with the bar code scanner. At this time, data's accuracy is decreased owing to the worker's intention or mistake, and it causes the problem of the system's reliability. Accordingly, in order to solve such problem, the companies have introduced RFID which comes into the spotlight in the latest automatic identification field. RFID is an automatic identification technology by radio communication technology that allows us to identify or record information without contacting the corresponding object, and as Gen2 and EPCIS, EPCglobal's standard tag for RFID, have recently been established, it will be introduced to the whole computation industry. This study suggests RFID type Modeling Notation for analyzing logistics flow to improve MES focusing on extended model of EPCIS, and EPCISEvent Template in manufacturing industry.