• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.669-670
• /
• 2020

현재 4차 산업이 진행됨으로써 대부분의 사물들이 자율화 기능이 더해지는 시대가 오고 있다. 자율화 기술이 발전됨으로써 모든 사람들은 삶을 살아가면서 스스로 문제를 해결해 나갈수 있으며 기존의 생활속도보다 빨라지는 것을 느낄수 있을 것이다. 그래서 마트에서도 쇼핑을하면서 소비자들이 어떻게 쇼핑을 할 때 현재의 수준보다 쇼핑의 질이 높아 질지 고안해보았다. 본 과제물은 소비자들이 쇼핑을할 때 보다 편리하게 일을 처리할수도록 스마트 기능을 카트와 카운터에 추가하였다. 카트에 디스플레이와 바코드 스캐너를 부착함으로써 검색을 통해 소비자들이 원하는 물품의 가격, 위치등의 정보를 알아 낼 수 있고 현재 카트에 담긴 물품의 총 가격을 알 수 있다. 또한, 쇼핑을 마치고 계산을할 때 계산 대기줄이 길어지는 불편함을 해소하기위해 자동계산 기능이 있다. 쇼핑을 마친 소비자가 카트를 카운터로 끌고가면 카트에 저장되어 있는 쇼핑정보가 카운터의 디스플레이에 표시되고 카트와 카운터의 정보가 일치한다면 소비자가 카트에 요금을 충전해 스스로 계산을 수행할수 있다. 이런 자동화, 스마트 기능들은 소비자들의 편리함과 시간을 단축시킬수 있을 것이다.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.1
• /
• pp.36-44
• /
• 2006

In this study, we constructed a forest fire danger map in the Yeongdong area of Gangwon-do and Northeastern area of Gyeongsangbuk-do using a forest fire rating model and geographical information system (GIS). We investigated the appropriate positions of the automatic weather station (AWS) and a comprehensive network solution (a system including measurement, communication and data processing) for the establishment of an optimum mountain meteorological observation network system (MMONS). Also, we suggested a possible plan for combining the MMONS with unmanned monitoring camera systems and wireless relay towers operated by local governments and the Korea Forest Service for prevention of forest fire.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.466-473
• /
• 2013

In this paper, a compact planar multi-loop self-resonant coil of high quality factor with a coaxial cross section is proposed for effective wireless charging. The proposed coil has high Q-factor and a resonant frequency of a coil can be easily controlled by adjusting distributed capacitance. For designing the coil, a self-inductance and a distributed capacitance are calculated theoretically. The self-inductance is calculated from the sum of the mutual energies between small circular loops that are made by dividing the cross section of the coil. To verify its properties and calculation results, the self-resonant coils are fabricated by using a coaxial cable with characteristic impedance of $50{\Omega}$. The measured frequencies are very consistent with the calculated ones. In addition, the resonant frequency can be adjusted slightly by the tuning parameter ${\gamma}$. The resonant coils are applied to a tablet PC, the Q-factors of the Tx and Rx resonant coils are 282 and 135, respectively. As a result of measurement when height between the two resonant coils is 4.4 cm, the power transfer efficiency is more than 80 % within a radius of 5 cm.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.263-267
• /
• 2015

current mine detector can't division the section if it is conducted and it needs too much labor force and time. in addition to, if the user don't move the head of sensor in regular speed or move it too fast, it is hard to detect a mine exactly. according to this, to improve the problem using one direction ultrasonic wave sensing signal, that is made up of human body antenna part, main micro processor unit part, smart glasses part, body equipped LCD monitor part, wireless data transmit part, belt type power supply part, black box type camera, Security Communication headset. the user can equip this at head, body, arm, waist and leg in removable type. so it is able to detect the powder in a 360-degree on(under) the ground whether it is metal or nonmetal and it can express the 2D or 3D film about distance, form and material of the mine. so the battle combats can avoid the mine and move fast. also, through the portable battery and twin self power supply system of the power supply part, combat troops can fight without extra recharge and we can monitoring the battle situation of distant place at the command center server on real-time. and then, it makes able to sharing the information of battle among battle combats one on one. as a result, the purpose of this study is researching a smart wearable mine detector which can establish a smart battle system as if the commander is in the site of the battle.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.544-551
• /
• 2014

This paper suggests an algorithm to measure low-level radiation by radiation measuring devices, and the other algorithm to improve reaction speed of the device to better respond to dramatic changes in radiation amount. The former algorithm to improve the accuracy of measuring low-level radiation takes advantage of a dual window radiation measurement method which is based on accumulated average of pulses gathered by a radiation measuring sensor. The latter algorithm is to enhance reaction speed of a measuring device to more sensitively react to dramatic changes in radiation amount by adopting a dual window radiation measurement method which analyzes data patterns newly put into for six seconds. To verify the suggested algorithms, a hardware-which consists of sensor and high-voltage generator, controller, charger and power supply circuit, wireless communication part, and display part-was used. Tests conducted on the dual window radiation measurement method as used in the suggested algorithm have proved that accuracy improves to measure low-level radiation of 5uSv/h, and linearity also gets better. Other tests were conducted to see whether the suggested algorithm enhances the reaction speed of a radiation measuring device so that the device responds better to dramatically changing radiation amount. The experimental results have shown meaningful changes in numbers after six seconds. Therefore, the conclusions are made that the algorithm enhances the reaction speed of the device.

• Informatization Policy
• /
• v.18 no.3
• /
• pp.88-107
• /
• 2011

This paper proposes a prepaid system promotion policy for the 3G(WCDMA) MVNO with regard to the newly included paragraphs 3, 4 and 5 of Article 32 (User Protection) and Article 38 (Provision of Wholesale Telecommunications Services) of the Telecommunication Business Act, which was revised on March 22, 2010. As of June 2011, there are only a few prepaid system subscribers to the mobile communications service due to various limitations, including prepay, interconnection, carrier selection, the MVNO policy, and number portability. However, overseas communications service regulatory agencies and service providers are increasingly presenting policies and strategies for mobile prepaid plans, in order to accommodate the various customer demands that are increasing the use of smart phones and data. This paper advances various proposals concerning promotion of the prepaid system by the 3G MVNO under the current Telecommunication Business Act, including separation of the prepaid data system and the mobile network; introduction of a monthly fixed-rate hybrid prepaid system, a top-up system and USIM system; introduction of mobile network carrier selection; differentiated retail discounts between prepaid and post-paid prices; revision of the retail discount policy for wholesale provision; increase in the number of mandatory service providers; and in-depth consideration of the introduction of a number portability policy for the prepaid and post-paid systems.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.86-92
• /
• 2022

Recently, the bio-healthcare market is enlarging worldwide due to various reasons such as the COVID-19 pandemic. Among them, biometric measurement and analysis technology are expected to bring about future technological innovation and socio-economic ripple effect. Existing systems require a large-capacity battery to drive signal processing, wireless transmission part, and an operating system in the process. However, due to the limitation of the battery capacity, it causes a spatio-temporal limitation on the use of the device. This limitation can act as a cause for the disconnection of data required for the user's health care monitoring, so it is one of the major obstacles of the health care device. In this study, we report the concept of a standalone healthcare monitoring module, which is based on both triboelectric effects and electromagnetic effects, by converting biomechanical energy into suitable electric energy. The proposed system can be operated independently without an external power source. In particular, the wireless foot pressure measurement monitoring system, which is rationally designed triboelectric sensor (TES), can recognize the user's walking habits through foot pressure measurement. By applying the triboelectric effects to the contact-separation behavior that occurs during walking, an effective foot pressure sensor was made, the performance of the sensor was verified through an electrical output signal according to the pressure, and its dynamic behavior is measured through a signal processing circuit using a capacitor. In addition, the biomechanical energy dissipated during walking is harvested as electrical energy by using the electromagnetic induction effect to be used as a power source for wireless transmission and signal processing. Therefore, the proposed system has a great potential to reduce the inconvenience of charging caused by limited battery capacity and to overcome the problem of data disconnection.