• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.39 no.3
• /
• pp.43-48
• /
• 2010

건물의 친환경 자동제어를 위하여 부하에 따라 센서를 조밀하게 설치하여 꼭 필요한 곳에 냉 난방을 실현하는 방법으로 Ad-hoc Mesh Networking 기술을 활용한 실내환경 모니터링용 무선센서 기술을 소개하고자 한다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.5
• /
• pp.35-44
• /
• 2008

In this study, to establish a web-based bridge monitoring system with wireless sensor network environment, we constructed microminiaturized sensor based wireless communication techniques and micro processing, databases for data combination and administration, variable control programs and processors for transferring data by internet. Then those data are measured and analyzed by the constructed bridge monitoring system with wireless sensors. To evaluate the practicability of the bridge monitoring system with wireless sensor, we compared the values measured in the tests with wire sensor under same conditions. The results show that the trend of the data obtained from the monitoring systems with wire sensors and wireless sensors was very similar but the some lost data in the communication process with wireless sensor network environment. And through laboratory and field tests, the effectiveness and the applicability of the proposed methods were verified.

• Journal of Korea Multimedia Society
• /
• v.16 no.10
• /
• pp.1196-1203
• /
• 2013

In general, the cost of transceiver for wireless network configuration is more expensive than that for wired network. However, in case of environmental management system in a tunnel, the cost can be minimized by adopting low rate tranceiver because the amount of the exchanged data for tunnel monitoring is very small. When the obtained data from sensor node is sent directly to the corresponding command node, there is no need to consider routing problem of the data transfer. However in this case, sensor nodes are required to be implemented with high power transmitter and experience high energy consumption. To tackle this problem, relay nodes can be used to transfer the data of tunnel monitoring, and suitable routing protocols for selecting optimum path are needed. Therefore, in this paper, we propose a routing algorithm and a self-configuration protocol for environment management system in tunnel.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2330-2336
• /
• 2008

This paper deals with monitoring sensor robot control system for the application of wireless sensor network. In order to control the direction and speed of robot via remote sensing environment, low power, low weight sensors with ad-hoc networking between robots' sensors have been used. These wireless sensor network based robot monitoring system can be used for remote observation and detection of robots in the areas such as factories, power plants and other dangerous areas which are difficult for human access.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.6
• /
• pp.61-69
• /
• 2014

Various Time Synchronization protocols considering for the characteristics of WSN(Wireless Sensor Network) have been developed, because a time relationship plays an important role in many WSN applications, as well. Synchronization accuracy as well as constraints of energy should be considered for WSN Time Synchronization protocols, especially. In this paper, I analyze Time Synchronization protocols for WSN after classifying these protocols with a new criteria (i.e. power consumption). So, this method will contribute to evaluating and comparing WSN Time Synchronization protocols in respect of power consumption.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.96-98
• /
• 2014

Wireless Sensor Network(WSN) is a wireless real-time information(Acquired from the sensor nodes that have the computing power and wireless communication capabilities.) collected, and to take advantage of processing techniques. Currently it is very diverse, such as environmental monitoring, health care, security, smart home, smart grid applications is that. Thus it is required in the wireless sensor network, the algorithm for the efficient use of the limited energy capacity. Suggested by the algorithm for selecting a cluster head node for a hybrid type and clustered, by comparing the amount of energy remaining and a connection between the nodes In this paper, we aim to increase efficiency and accuracy of the wireless sensor network.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.161-167
• /
• 2012

Portable devices such as smartphones with built-in wireless LAN to the prevalence of anyone using. But the wireless Internet connection and positioning services are limited to high-quality wireless service, they may not be available. Thus, wireless LAN infrared sensor in the same way as with angry alternative way wireless capabilities of the application automatically identify the location of the Sensor application as an alternative method is proposed. Thus, wireless LAN, such as infrared sensors and other alternzative methods of wireless features in a way where the application can recognize and automatically recognize the sensor application as an alternative method is proposed. Sensor is signals between wireless LAN and access points using the sensitivity, WLAN antenna with omni-directional signal output operation of the sensor is assumed to be recognize this by putting a direction to obtain through the proposed algorithm, Sensors such as photo-coupler without direct recognition sensor, wireless LAN and access points, the same function as the connection between the sensitivity to perform its function was to utilizing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1038-1041
• /
• 2009

Wireless sensor network with wireless sensor nodes which equipped with temperature, humidity, illumination, or soil sensor etc, get a natural environment information and analyze and utilized variety way.these network consist of a short distance wireless communication and multi-hop techniques with multiple nodes equipped low-power wireless transceivers. so the characteristic of the data collected through the wireless sensor network is obtained from compact nodes within a limited range. However, to get a data from the wireless sensor nodes scattered in a wide range, this network needs a wireless transceiver that consumes many power or a lot of intermediate nodes. then, merit of low cost and low electrical energy decrease. To solve this problem, this paper offers environment monitoring system using autonomous mobile robot that collect data from groups of each sensor networks scattered widely.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.845-848
• /
• 2008

In case of application test in wireless sensor network, there are many difficulties in power supplying to wireless sensor node, installing and deploying of sensor nodes, maintaining and debugging. For efficient development and maintenance of wireless sensor network-based application, a simulator is essentially needed. However, the existing wireless sensor network simulators are focused to distribution of MAC address, routing, power management, it is not suitable to test the function of application in host which processes message through sink node. In this paper, we designed and implemented a log-based simulator for application running in host connected sink node.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.2
• /
• pp.65-73
• /
• 2004

By the progress of communication and hardware technology, It is possible to organize wireless sensor nodes using the tiny sensor in recently. It is a critical aspect to minimize energy consumption for long-term lively sensor because wireless sensor nodes are associated with the available resources. The wireless sensor network is restricted in communication, exhaustion of power, and computation but it is very similar an Ad-Hoc network. Each sensor node products a few data and application layer of each sensor has slow transmitting feature. Unlike Ad-hoc, which is usually source or sink, base station of the each senor nodes works as sink and the other nodes except sink node works as source. Generally, wireless sensor network keep staying fixed state and observing circumstances continuously after setting up. It doesnt fit for the wireless sensor networks under functioning of existing ad-hoc networks because original Ad-Hoc network routing protocol couldnt operate for wireless sensor network features. This thesis propose the effective routing protocol way in the filed of the expanded routing protocol based on tree with considering on the characteristic of wireless sensor networks pattern.