• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.63-69
• /
• 2014

Visible light communication is a communication method using an LED's blinking(ON/OFF), it has a feature of light because of the limit of perception by the human's optic nerve. LED' dimming control used in the VLC system is important factor needed to provide energy saving and life benefits. With advances in VLC system, MIMO technology has received much attention in that it can be obtain channel capacity proportionate to the number of antenna. Therefore, in this paper, with RC method which is one of the MIMO style in VLC system, it is compared communication performance using RZ-OOK, VPPM, MPPM and OPPM. As a result of the simulation was run against this, MPPM works well in terms of Power requirement and OPPM works well in terms of Spectral efficiency and Bandwidth requirement, also it was confirmed that there is a significant impact on the communication performance of each modulation scheme according to the dimming.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.4
• /
• pp.43-51
• /
• 2010

In this paper, we studied line coding technology tendency for high speed data communication at LED-ID (Identification) communication system in indoor environment. A LED-ID technology is a communication using visible ray (RGB) that come out in LED device. It is energy curtailment effect and possible in ubiquitous network service applications. The LED-ID system has the above advantages about that the communication throughout the whole room is enabled by high power lighting and lighting equipment with white colored LED which are easy to install and have good outward appearance. Therefore, the transmission by light waves is more suitable for wireless networks than by radio waves. We compared with the NRZ, AMI, 4B5B, HDB3, 8B10B line coding for efficient in error detection and serves data transmission of high speed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.13-14
• /
• 2012

Than fluorescent lamps or light bulbs, long life, small power consumption and to the development of modern technology, LED (Light Emitting Diode) devices have the advantage of easy control. For these reasons, using the LED device, lighting has been widely used. LED using optical fiber technology using LED lighting technology with the development of wireless communication technology is attracting attention again. Using LED lights this study analyzed the performance of the technology transfer and implementation of the information transmission system of the visible light communication using LED lighting of the White Visible Light Communication (VLC) based PC module transmitter and receiver modules. Has made a system that can transmit information more than the value of the initial distance ~ 50cm, depending on the presence or absence of the lens, in order to increase the efficiency of the LED modules with different efficiencies that could confirm the performance of the implementation of the research, analysis, and application methods. and about the possibility that you want to check.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.639-642
• /
• 2014

If the power of the general is not supplied, Visual aids utilize solar power system. The power supply system of these, the role of the power regulator to manage the charging and discharging is very important. In recent years, by introducing the IT technology for the effective management of visual aids, it was supposed to add a device that uses the power consumption. Thus, the importance of power regulator has increased. Currently, the power regulator is installed inside the AtoN, if the accessibility is not ensured, there is a difficulty that can not be checked. In order to solve these problems, in this paper, you have installed the Blue-tooth module to the power regulator. Also, by using the Blue-tooth communication function of a smart phone, a radio check has implemented a possible monitoring system. Advantage of the system implemented is a simple configuration and low installation cost. Also, it is possible to check the state information of the real-time power supply regulator. In addition, it has the effect of preventing accidents and reducing costs of inspection.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.273-275
• /
• 2009

In recent years, many home machines have been developed in order to design and control comfortable interior inside houses. For such task, important factors are temperature, natural and interior lights, and space and control of relative factors each other. This paper presents novel sensor module inside houses, which is designed based on these factors through the PMV (Predicted Mean Vote) standard using information about home state. Moreover, LonWorks based power line communication technique is utilized for control interior lights and air-conditioners by means of wireless remote controllers. This mechanism is systemically operated via intelligent control framework.

• Korean Journal of Optics and Photonics
• /
• v.16 no.5
• /
• pp.417-422
• /
• 2005

When an optical pulse propagates through the atmospheric channel, it is attenuated and spreaded by the atmospheric turbulence. This pulse broadening produces the intersymbol interference(ISI) between adjacent pulses. Therefore, adjacent pulses are overlapped, and the bit rates and the repeaterless transmission length are limited by the ISI. In this paper, the ISI as a function of the refractive index structure constant that presents the strength of atmospheric turbulence is found using the temporal momentum function, and is numerically analyzed fer the basic SONET transmission rates. The numerical results show that ISI is gradually increasing at the lower transmission rate than the OC-192(9.953 Gb/s) system and is slowly converging after rapid increasing at the higher transmission rate than the OC-768(39.813 Gb/s) system as the turbulence is stronger. Also, we know that accurate information transmission is possible to 10[km] at the OC-48(2.488 Gb/s) system under any atmospheric turbulence, but is impossible under the stronger turbulence than $10^{-14}[m^{-2/3}]$ at the 100 Gb/s system, $10^{-13}[m^{-2/3}]$ at the OC-768 system, and $10^{-12}[m^{-2/3}]$ at the OC-192 system, because the ISI is seriously induced.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.914-916
• /
• 2013

Renewable energy from the environment in a variety of ways to obtain various forms of energy. Recent functional polymer composites (EAP) to take advantage of the pressure and vibration of physical energy into electrical energy storage, to take advantage of current collector technology is attracting attention. EAP, a type of IPMC (Ionic exchange Polymer Composite) got a hydrophilic properties, marine power plants is being studied as a source of energy. Studies using IPMC marine power plant because there is a constraint on the time, IPMC in real time, which can measure the power generated by the system is required, Due to the nature of the power plant to be floating in the sea through the power cable and data transmission measurement system is hard drive self-generation and wireless data transmission system is required. In this study, IPMC marine power plant is to develop a system of monitoring. IPMC for several power plants to build individual current-voltage measurement system, CAN communication with the main system to collect all the information and wireless data transmission to occur, and Generation of electricity using solar energy to building systems in real-time without an external power supply to drive the measuring system is to develop a monitoring system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.77-83
• /
• 2006

In this paper, we designed, constructed and evaluated the system for the FTTH suited to a residence and apartment using CWDM-PON techniques. These systems have capacity to service at 100Mbps rate to 384 users in the same breath. Also, the services include the internet, CATV, IPTV and wireless LAN. In the case of ire network, the data could be transmitted by UTP cable and optical fiber and case of wireless one, the data transmitted using WLAN. The distance between the cental office and the user is 20km and the data rate is 100Mbps maximum. Of course, the optical network used just one fiber optical core. For the basic material, we obtained the characteristics of optical transceiver module, Mux/Demux and transmission qualities depends on the environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.8
• /
• pp.672-678
• /
• 2013

In the recent year, along with the rapid development of LED technology, many applications using LEDs have been researched and indoor positioning is one of them. In particular, previous indoor positioning systems based on visible light communication combine triangulation manner such as AoA, ToA TDoA. But most of them needs transmitting unique ID of each LED panel. In this paper, we propose an non LED-ID based indoor positioning system in which the visible light radiated from LEDs is used to locate the position of receiver. Compared to current indoor positioning systems using LED light, our system has the advantages of simple implementation, low cost and high accuracy. Through the computer simulation, our system can achieve a high estimation accuracy of 3.6cm in average in the $5{\times}5{\times}3m^3$ room.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.927-934
• /
• 2019

Recently, mobile devices have evolved into small computers with various functions according to user requirements. Careful attention must be paid to the design of the power supply network for the stable operation of the application processor (AP), the wireless communication modem, the high performance camera, and the various interfaces of the mobile device to implement various functions of the mobile device. In this paper, we analyzed and verified the method of optimizing the design parameters such as the position, capacity, and number of decoupling capacitors to meet the target impedance required by the driver IC chip to ensure the stability of the power supply network of mobile devices that should be designed as wiring type due to mounting density limitation. The proposed wired power supply network design method can be applied to various applications including high-speed signal transmission line in addition to mobile applications.