• Journal of Animal Environmental Science
• /
• v.17 no.2
• /
• pp.71-80
• /
• 2011

Trickling filter has been extensively studied for the domestic wastewater treatment especially for the small scale plants in rural area. The purpose of this research is to survey the physical and microbial characteristics of wood chip media and the removal efficiency of animal wastewater using wood chip trickling filter system. The trickling filtration system comprises a filtration bed packed with wood chip media having a particle dia. of 5~7cm. The method comprises natural air from the bottom of the bed. The system also comprises a control mechanism including a time a constant discharge pump for controlling supply of the wastewater into the bed. The following conclusions were obtained from the results of this research. 1. The specific surface area of wood chip was 0.4123 $m^2$/g, pore volume was 0.0947 $cm^3$/g, density was 0.49 g/$cm^3$. It has forms of parallelogram and oblong which have numerous small pore space. This wood chip has been good condition for microorganism's habitat, having very larger specific surface area by complex the three dimension structure of cellulose at wood's major ingredients. 2. The total counts of in attached aerobic microbes were ranged from $10^6$ to $10^8$ CFU/g, and anaerobes microbial numbers were from $10^4$ to $10^7$. The aerobic microbial numbers appeared to be much more than those of anaerobic microbial numbers. 3. The average efficiency of $BOD_5$ and CODcr were 74.5% and 51.5%, respectively. The removal efficiency of T-N and T-P were 61.4%, 56.2%, respectively. But SS removal levels remain 19.3%.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.77-84
• /
• 2012

It is known that some components of wood obstruct the hydration of cement when wood is mixed with cement. In order to examine the effect of pretreatment of wood chips in hot water, this study conducted the experiments for the setting and compressive strength of mortar by sieving pine wood chips with a 2.4mm sieve, dipping them in waters of different temperatures, and then using them as a part of the fine aggregate. For the experiments, water-cement ratio of the mortar was 0.50 and the amount of the fine aggregate substituted by wood chips was set at 0%, 2%, 4%, 6%, 8%, and 10% of the mass of the fine aggregate. As a result of the test, it was found out that when wood chips were used to substitute fine aggregate for the production of mortar, more usage of wood chips postponed setting more, and the treatment of wood chips with water improved the problem of the delay in setting time. Especially, the final setting time of the mortar which used 2~6% of wood chips treated in $100^{\circ}C$ water for 30 minutes was almost the same as the final setting time of the mortar which used no wood chips. Also, the compressive strength of the mortar which used the wood chips treated with water was compared to that of the mortar which used the wood chips not treated with water. The result showed that the strength improved for age of 7 days and 28 days, while there was little change in strength for age of 3 days.

• Journal of Animal Environmental Science
• /
• v.10 no.2
• /
• pp.81-86
• /
• 2004

This experiment was conducted to evaluate combination system of wood chip trickling system and activated sludge process. The results obtained are summarized as tallows. The trickling filter system using wood chip was used as a biological pre-treatment system for treating piggery wastewater. At pre-treatment the removal efficiencies were BOD $91\%$ CODmn $65\%$, SS $75\%$ T-N $73\%$, T-P $69\%$. After pre-treatment the removal efficiencies in activated sludge process were BOD $99\%$ CODmn $94.6\%$, SS $97.8\%$ T-N $91.1\%$, T-P $91\%$. This study shows a very stable method with pre-treatment of trickling filter using wood chip. These combined treatment system was very useful for piggery wastewater.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.3
• /
• pp.71-82
• /
• 2012

Common bulking agents in composting system include woody materials such as sawdust and woodchips. These bulking agents are mainly used for the purpose of the proper control of C/N ratio and moisture content in the composting. The topic for the effect on air permeability of bulking agents has far received relatively little attention in the composting field. This study investigated the effect of bulk density, moisture content, air-filled porosity, particle size and air flow rate on air permeability of several mixture ratios of sawdust and woodchip bulking agent. Increasing the moisture contents, the air-filled porosity was decreased and the particle size was increased for all kinds of bulking agent mixtures. Especially, with the increasing of mixing ratio of woodchip, these effects were sharply magnified. The air permeability respond to air-filled porosity was very similar to that for moisture content which was anticipated the linear relationship between air-filled porosity and moisture content. Above the region of moisture content 0.25 or 0.43(d.b.)(20 or 30% w.b.), the pressure drop decreased even though air-filled pore spaces were filling with water. Especially, to the particle size of 5 mm the pressure drop was decreased exponentially, so the air permeability was dramatically improved. By the water had the role of binding of the small particles, the macropores less resistances to air flow were created in the matrix. The effect of particle size on air permeability was much stronger than that of air-filled porosity or moisture content. And it is needed the preparing of initial particle size above 5 mm for efficient composting.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.1
• /
• pp.12-21
• /
• 1987

본질(本質) Cement board제조(製造)를 위하여 지금까지 톱밥, 목편(木片) 및 목수(木手)(excelsior)가 사용되어 왔으나, Wafer를 사용한 제품(製品)은 아직 개발(開發)되지 않고 있는 실정이다. 따라서, 본(本) 연구(硏究)는 Cement wafer board를 압력별(壓力別), Wafer 길이별(別), Cement와 목재(木材)의 배합비별(配合比別), Wafer 배열별(排列別)로 제조(製造)하여 그 영향인자(影響因子)를 조사(調査)하고 이에 따른 제품(製品)의 물리적(物理的), 기계적(機械的) 성질(性質)을 구명(究明)하고자 실시(實施)하였으며 다음과 같은 결론(結論)을 얻었다. 1. Cement Wafer board 제품(製品)의 적정압력(壓力)은 30kg/$cm^2$이었고, 30kg/$cm^2$ 이상(以上)의 압에서는 board의 기계적 성질에 나쁜 영향을 미쳤다. 2. Cement와 목재(木材)의 배합비(配合比)가 2.1을 넘을 경우에는 board의 성질에 나쁜 영향을 끼쳤다. 3. 한쪽 방향(方向)으로 Cement-Wafer가 배열된 조건에서 제조된 CWB가 최고의 곡강도(曲强度)를 나타내었다. 4. CWB의 곡강도(曲强度)는 다른 목질(木質) Cement board보다 높은 값을 나타내었으나 박리강도(剝離强度)에 있어서는 목편 Cement board보다 약간 낮은 값을 나타내었다. 5. CWB의 난연성(難燃性) 시험(試驗)은 난연3급(難燃3級)을 만족시켰다.

• Journal of Korean Society of Forest Science
• /
• v.99 no.3
• /
• pp.353-358
• /
• 2010

In this study, we investigated the relationship of tree-ring growth with total nitrogen content, and stable carbon and nitrogen isotopes from the core samples of Pinus koraiensis (35-year-old). Annual ring width showed significant positive correlations with the ${\delta}^{13}C$ (P=0.003). The total nitrogen content (P=0.024), and the ${\delta}^{13}C$ content was also correlated with total nitrogen content (P=0.038), indicating that the growth of P. koraiensis was stimulated as the contents of both ${\delta}^{13}C$ and total nitrogen were increased. On the other hand, the less the ${\delta}^{15}N$ content and the C/N ratio were, the larger the annual ring width was. Moreover the families with relatively better growth performance contained the higher levels of ${\delta}^{13}C$ in the xylem compared to other families. These results suggest that the ${\delta}^{13}C$ and total nitrogen contents are the important determinants in the growth performance of P. koraiensis.

• Journal of Animal Environmental Science
• /
• v.16 no.3
• /
• pp.215-226
• /
• 2010

The pig slurry leachate was dark brown-colored solution that leaches out of woodchip trickling filter. The purpose of this research was to investigate the effect of pig slurry leachate and byproduct on growth characteristics of leaf lettuce in hydroponics culture. The effects of addition of fish meal, bone meal and crab shell for the growth of leaf lettuce were investigated. Leaf lettuce were grown in each of six combination treatment solutions; slurry leachate, slurry leachate + fish meal, slurry leachate+bone meal, slurry leachate + crab shell and chemical hydroponic solution for lettuce based on EC content. The chemical nutrient solution was the solution of National Horticulture Research Station for the growth of lettuce. The all of nutrient solution was adjusted 1.5 mS/cm in EC in hydroponics culture. 1. The pH level of leachate of trickling filter was increased and EC decreased gradually during treatment. Pig slurry leachate was low in suspended solids (SS), phosphorus (P), but rich in potassium (K). 2. The plot of slurry leachate (SL) was lowest in the growth characteristics of lettuce. The leaf length and width of lettuce treated with mixture plot of slurry leachate and fish meal (SL + FM) was higher compared with plot in slurry leachate. The chlorophyll reading was reduced in plot treated with slurry leachate, but that in plot of SL+FM was similar compared with control plot. 3. The fresh weight of lettuce showed lowest in the plot treated with slurry leachate. The addition of fish meal increased the yield of comparing plot of slurry leachate, but plots of bone meal and crab shell addition were not significantly difference. The fresh weight of leaf lettuce in plot of SL+FM was 87% as 400.0g compared with control. In conclusion, the mixture solution of pig slurry leachate and fish meal could be used as a nutrition solution of organic lettuce hydroponics.

• Journal of Korean Institute of Industrial Engineers
• /
• v.4 no.2
• /
• pp.49-58
• /
• 1978

The purpose of this study was to analyze the actual condition of curriculum composition by factor analysis, then to find out the peculiarity of each factor through factor loading. The method adopted here is to classify and arrange the curricula in accordance with the similarity of each subject, to put it into computer, and to get 16 factors whose eigenvalues are at least 1.00. Consequentely, before the orthogonal rotation 67% of the curricula which have the given factors and maximum factor loading were distributed from factor 1 to factor 4, and after orthogonal rotation 45% of the curricula were distribued.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.3
• /
• pp.53-58
• /
• 2008

Wood composite, could generally be made from very fine wood powder(<150 mesh) because more large size of wood particle had much less plasticity compared of polymer. To make more high plasticity of relatively large size of wood particle, wood particles were chemically modified with some reagent for acetylation and esterification, etc. WPC(wood plastic composite) was prepared with chemically modified wood particles and the mechanical properties of WPC were evaluated. WPC of esterified wood with maleic anhydride shows the highest level in tensile strength and breaking elongation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.3
• /
• pp.59-64
• /
• 2008

The mechanical properties of WPC(wood plastic composite) should effected with the size of wood particle size and also characteristics of wood particles. In this paper, WPC were prepared with various size of wood particles and coupling agent and the mechanical properties were evaluated. The smaller size of wood particle were used for WPC, the higher properties of WPC in tensile strength and breaking elongation were obtained. The smaller amount of wood particle were used for WPC, the higher properties of WPC in tensile strength and breaking elongation were obtained.