• Journal of the Korean Wood Science and Technology
• /
• v.23 no.4
• /
• pp.27-32
• /
• 1995

To understand whether ligninolytic enzyme catalyze polymerization or depolymerization of the high molecular weight (HMW) lignin, the action of laccase and Mn-peroxidase (MnP) towards commercial ligninsulfonates (LS) was examined in various conditions of pH and cosubstrates. Polymerization occurred when LS was incubated with laccase at pH 6.0. In contrast, the high molecular weight portions were significant1y reduced at pH 4.5, especially when glucose was added. When LS was treated with MnP at pH 4.5, compounds of low molecular weight were produced. In particular, when cellobiose was added to Mn-P reaction mixture, the breakdown of LS was observed. In conclusion, degradation of LS by laccase and MnP occurred primarily at pH 4.5 where-as polymerization of LS was dominant at pH 6.0. Color index, however, was not greatly changed in the degradation mixtures of LS.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.1
• /
• pp.1-17
• /
• 2000

Crystals in the woods and barks of Populus maximowiczii and Populus nigra ${\times}$ maximowiczii were examined by light microscopy, scanning electron microscopy and soft X-ray. Populus examined had the wetwood and the heartwood of Populus showed higher moisture content than in adjacent sapwood. The crystals can be detected clearly by the soft X-ray due to their higher densities than the wood. Crystals in xylem wood of Populus were found mainly at heartwood. However, they were concentrated in specific areas such as in color-stained area or along the specific annual rings. Crystals showed the highest occurrence around the pith. Within a growth ring the amount of crystals in earlywood was more abundant than in latewood. Crystals were observed mainly at vessels and fibers although they occurred at all kinds of cells in heartwood. Crystals in the bark were scattered evenly both in inner bark and in outer bark. Populus nigra${\times}$maximowiczii showed higher frequency of leaf knots than Populus maximowiczii.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.1
• /
• pp.68-78
• /
• 2006

The purpose of this study was to estimate the identification of thermophilic hacterial with fermentation of pig manure. To identify the characters of thermophilic bacteria related to fermentation at a high temperature condition, we selected 28 different kinds of original settling thermophilic bacteria that were sampled at different 23 areas. They were distributed 1$1{\times}10^5{\sim}10^8CFU$ at medium and the enzyme activity at $55^{\circ}C$ incubation condition, especially cellulase and a-amylase, were higher than those of $30^{\circ}C$. Partial sequencing data for 165 rDNA region were obtained from 28 samples representing 15 different genera. Bacillus subcilis, one of those bacteria, has endodermic spores at high fermented condition.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.3
• /
• pp.52-61
• /
• 2000

Black locust(Robinia pseudoacacia) and poplar(Populus alba ${\times}$ glandulosa) trees were collected, extracted with acetone-$H_2O$(7:3, v/v) after drying, fractionated with hexane, chloroform and ethylacetate, and freeze dried to get some brown powder. Each fraction of the powder was chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-hexane mixture as eluting solvents. The wood extractives of black locust contained (+)-leucorobinetinidin as flavan, robtin as flavanone and dihydrorobinetin as flavanonol, and robinetin as flavonol. The poplar bark extractives contained various kinds of phenolic compounds : (+)-catechin as flavan, naringeoin, eriodictyol, sakuranetin, aromadendrin and taxifolin as flavanonol, salireposide as salicin derivative, and minor compounds such as aesculin and p-coumaric acid. However, aesculin has not been reported as a constituent of the poplar bark in Korea yet. NMR and FAB-MS analyses were done to elucidate the structures of isolated phenolic constituents.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.486-493
• /
• 2015

The ultrasonic nondestructive test (NDT) was applied to deck in-service to inspect and evaluate the performance of decking materials using ultrasonic pulse velocity. First, the measuring method between direct and indirect method according to transducer arrangement was studied. Second, the ultrasonic pulse velocity of decks in-service was compared with the passage of time. Finally, the change of ultrasonic pulse velocity was evaluated to expect service life of decking materials. The results of comparison between direct and indirect method was statistically insignificant and the ratio of direct to indirect method was 1.02. 1.05 respectively. The ultrasonic pulse velocity of decks in-service was decreased as the passage of time and the linear relationship in the ultrasonic pulse velocity to passage of time was found. From the results, The ultrasonic NDT will be helpful as an efficient method of on-site management of decks in-service.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.438-445
• /
• 2015

Among several thermal wood modification methods German oil heating technology was applied to Korean pine specimens by heat treatment at $180^{\circ}C$ and $200^{\circ}C$. In addition the matched specimens were heat-treated by Thermowood method. The heat-treated specimens were planed and their colors were measured with a colorimeter at 1 mm and 4 mm below the surfaces. The average lightness index (L*) of Oil-180 specimens was the largest followed by Oil-200 and Tmo-200 specimens. The average redness indexes (a*) of all specimens were increased by heat treatment, while the average yellowness indexes (b*) were variable. The average color differences (${\Delta}E*$) of Oil-200 and Tmo-200 specimens were above 30.0, while that of Oil-180 specimens was only 18.4. It can be concluded that the colors of the heat-teated specimens were uniformly changed because their average color difference indexes (${\Delta}E*$) between the inner layers were below 6.0.

• Fire Science and Engineering
• /
• v.28 no.2
• /
• pp.54-63
• /
• 2014

The purpose of this study is to test the adaptability of the CO sensor as a fire detector by analyzing its sensing characteristics on fire. In order to test the applicability, we designed and made a fire testing ground whose size is similar to that regulated by UL 268, carried out real fire tests suggested by UL 268, and conducted a comparison analysis on the sensing characteristics between the CO sensor and a photoelectric smoke detector by different types of fire source. The experiment result to the sensing characteristics of the CO sensor is about twice to three times faster than that of the photoelectric smoke detector, proceeding with incomplete combustion such as paper and wood fire source in the initial fire. Especially in case of wood smoldering fire, sensing characteristics of the CO sensor is very excellent.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.233-236
• /
• 2008

In the traditional way floors has been constructed there are no shear connectors between the concrete slab and timber joists. In this study, an existing floor system os improved by simply providing normal bolts or lag screw so that the composite action can be achieved. It is evident that the key elements in the composite beam are the shear connectors. The selection of these connectors was based on their shear capacity. The experimental study carried out in this research investigated the flexural behavior of composite beams. The experimental studies of composite beams showed that the ultimated load capacity of the proposed composite beam(LS-S10 specimen) is 1.29 times as high as the noncomposite one. Finally, it can be concluded that LS-S10 specimen consisting structural laminated timber beam and concrete slab can be significantly improved by providing appropriate shear connectors.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.5
• /
• pp.86-92
• /
• 2004

This research was carried out to examine the ethylene gas adsorption and preservation life of white charcoal boards for packaging. Two types of white charcoal board were made of #40-60 charcoal particles and mixed charcoal particles with PVA and MDI resin by wet process. For not only beauty effect but also avoiding stain from touching, white charcoal boards were overlaid with two kinds of overlay material, thin printed paper and non woven fabric. A charcoal board adsorbed ethylene gas much more than the paper and even white charcoal itself. There was no difference between two board types, between overlay treatments, and between overlay materials. Gray mold growth of strawberry arised after 2 days in a paper box and after 4 days in a white charcoal board. Preservation life of white charcoal board box was approximately twice more than that. of a paper box. There was no difference in the ability of keeping freshness between two board types, between overlay treatments, and between overlay materials.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.1
• /
• pp.1-10
• /
• 2010

In this study, to study an effective use and improve strength performances of woods and wood-based materials, three-ply hybrid laminated woods which are composed of spruce in the face and three kinds of wood-based boards (MDF, PB, OSB) in the core were manufactured, and the effect of constitution elements used for the core laminae on bending creep performances was investigated. The shape of creep curves showed exponential function plots which the upper right side was increased, and differed among the kinds of wood-based boards used for the core laminae of hybrid laminated wood. The creep deformation perpendicular to the grain of faces of hybrid laminated woods was in order $C_{\perp}$(P) > $C_{\perp}$(M) > $C_{\perp}$(O) with PB, MDF and OSB in the core, respectively. It was found that the creep deformation arranged with OSB in the core had 2 times smaller than those arranged with MDF and PB in the core. By hybrid laminating, the creep deformation of spruce perpendicular to the grain was markedly decreased. On the other hand, the creep deformation parallel to the grain of the faces ($C_{\parallel}$ type) of hybrid laminated woods was in order $C_{\parallel}$(P) > $C_{\parallel}$(O) > $C_{\parallel}$(M) with PB, OSB and MDF in the core. The ratios among three hybrid laminated woods were considerably decreased, especially the difference between $C_{\parallel}$(P) and $C_{\parallel}$(O) hybrid laminated woods arranged with PB and OSB in the core was very small. These values showed 0.108~0.464 times smaller than creep deformation of three wood-based boards and it was found that creep deformation of three wood-based boards was considerably decreased by hybrid laminating. Creep anisotropy of hybrid laminated woods was greater in creep deformation than in initial deformation, whereas it was found that the values was much smaller than that of spruce parallel laminated woods.