• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.358-373
• /
• 2013

In this study, both mild acid and alkali treatments with 1.0 wt% and 2.0 wt% of $H_2SO_4$ and NaOH solution were applied to evaluate the effects on chemical compositions of wood biomass. Yellow poplar (Liriodendron tulipifera L.) and larch (Larix kaempferi C.) were chosen due to major species planted in Korea. Chemical treatments of biomass were carried out by being soaked in either acid or alkali solution with 1:20 ratio for 72 hours at ambient temperature. Afterward, lignin, 5 major reduced sugars, ash contents and elemental composition were determined. To statistically understand the relationship between samples and chemical treatments, the Tukey test, simple linear regression model and ANOVA analysis were introduced using a statistical software R. As results from both wet chemistry and statistical analysis, yellow poplar was more affected on the lignin and xylose contents by acid treatments under these experimental conditions. Meanwhile, larch was more affected on the composition of galactose and lignin by alkali treatments. A series of results in this study would show that equivalent chemical treatment makes a change the chemical composition of each species.

• Journal of the Korean Wood Science and Technology
• /
• v.7 no.1
• /
• pp.8-11
• /
• 1979

The apparatus for measuring the static withdrawal resistance of nail is the AUTOGROPH S-500 static testing machine. The nails were 0.25 - 0.26 cm in diameter, 4.9-5.1cm in length, and were driven into wood for a depth of 3.0 cm. The physical properties of wood specimens are shown in table 1. Some data obtained in this experiment are as follows 1) The effects of the direction of driving and the time after driving upon static withdrawal resistance are shown in fig. 2-3. 2) The relations between static withdrawal resistance are moisture content of wood are characterized by nearly straight line as shown in fig. 4-5. The empirical formula areas follows: Y = -0.074 x + 12.73 (Pinus koraiensis Sieb & Zucc. - radial) Y = -0.073 x + 7.54 (Pinus koraiensis Sieb & Zucc. - longitudinal) Y = -0.061 x + 12.80 (Larix leptolesis Gord. - tangential) Y = -0.081 x + 7.61 (Larix leptolepsis Gord. - longitudinal) Where Y is the static withdrawal resistance ($kg{\cdot}cm$) and x is the moisture content(%).

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.3
• /
• pp.173-180
• /
• 2013

This study was carried to provide basic data for the research of the effect of PEG impregnation on preventing wood from cracking during heat treatment. Three popular softwood species were selected for investigating the PEG penetration rate and retention depending on PEG molecular weight, PEG retention after heat treatment and their EMCs. The average retentions of PEG400 were reversely proportional to the basic densities of three species and those of the other PEGs showed similar behaviour as well. It is obvious that PEG retention decreased as PEG molecular weight increased with a species. PEG impregnation increased or decreased the moisture contents of the specimens within 2%, and increased their basic densities by 16.8% as a maximum. The Weight Percentage Losses of PEG400 during heat treatment were the largest among three PEG levels, which implied that lower molecular weight PEG leached more than the highers. There was less difference in EMC between PEG impregnated and control specimens at low RH, but their difference increased at high RH.

• Journal of the Korean Wood Science and Technology
• /
• v.4 no.1
• /
• pp.8-14
• /
• 1976

The capacity of wood to shrinkage is very important as the basis data for wood industry but there is no such data available as yet in Korea. So this article, as a study on forest biological, were made to determine the shrinkage properties of commercial hardwoods in Korea. The results of this study were as follows; 1) There are much difference of hardwoods shrinkage, generally values of heavy wood's shrinkage were larger than that of light wood's shrinkage. 2) The arithmetic; mean values of hardwoods shrinkage were respectively 9.03% on tangential, 4.09% on radial and 0.37% on longitudinal direction and its ratio of at : ar : al was appeared to be 10 : 5.5 : 0.4 3) Average shrinkage per 1% of moisture content was different due to the direction and species. 4) According to the increase of specific gravity the values of shrinkage increased. 5) It was recognized that the shrinkage of hardwoods had a tendency to decrease as increase of annual ring width of wood. 6) The shrinkage of tangential direction was in propertion to the shrinkage of radial direction.

• Conservation Science in Museum
• /
• v.4
• /
• pp.71-78
• /
• 2003

The wooden striker on the Divine Bell of King Seongdeok was examined to identify the species of the wood and the outdoor wood weathering caused by solar light, moisture, temperature and air. The species of the wooden striker was identified to Zelkova serrata. When observed the striker with naked eyes, the results were surface discoloration (graying), cracking and roughness. In order to examine the morphological changes according to deterioration type, the specimen were separated to three part(I, II,III-spot). The I-spot was discolored to gray and at the same time entirely covered with dust. So the observation was impossible. The II-spot was also discolored but its texture could be observed. On it could observe numerous fungal hypae and dirts like dust flown into the cell lumens. The cell wall has been so weakened by weathering that it lost the physical intensity. This have made microchecks and splits on the cell wall. Although fungal hypae covered the cell, they did not result in wood decay. The III-spot, located just 0.5 mm below the surface, was maintaining the natural red-brown color of the wood. Its cell wall was similar to that of sound wood. These changes are different from wood decay, and limited only to the surface of the striker-less than or equal to 0.5 mm below.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.635-645
• /
• 2014

The anatomical characteristics of eight major wood species planted in Indonesia were investigated to provide valuable information for their effective utilization. The growth-ring boundaries of Damar and Sumatran pine were indistinct. Resin canal was found in Sumatran pine but it was not observed in Damar. Cupressoid pit and taxodioid pit were found in Damar and window-like pit and pinoid pit were observed in Sumatran pine. Tracheid length of Damar and Sumatran pine was shorter than $3,000{\mu}m$. There were uniseriate rays in Damar and Sumatran pine and fusiform ray in Sumatran pine. All the hardwood species observed in this study were diffuse-porous. They had different vessel groups, i.e., solitary pore in Afrika and Simpur Batu, pore cluster in Angsana and mostly 2-4 rows of radial pore multiple in Mahoni. Mindi and Trembesi had mostly 2-3 rows of radial pore multiple with paratracheal parenchyma as aliform and confluent types. Afrika, Mahoni and Simpur Batu showed heterocellular rays which composed of procumbent cells in the body and mostly 1-2 rows of upright and/or square cells in the margin. All ray cells procumbent was observed in Angsana, Mindi and Trembesi. The large rays commonly exceeding 1 mm in height and ray width of 3~6 cells were observed in Simpur Batu. The other five hardwood species showed ray width of 1~3 cells. Vessel number per $mm^2$ of Angsana and Simpur Batu was higher than those of the other hardwood species. The length of wood fiber and tracheid showed a tendency to increase from pith to bark. By IAWA list, fiber length of hardwoods was classified into long in Simpur Batu and short in Angsana and Trembesi.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.2
• /
• pp.162-170
• /
• 2011

As the result of implementing a treated material test and durability test after quickly drying S.P.F. species, a type of softwood structural material, within a short period time, soaking it in liquid phosphate flame proof agent for an hour, microwave heating it, and compressing it from 3.8cm to 1cm, when setting the appropriate heating time of microwave heating at 7 minutes at 5kW, it is observed that it satisfies the target water content (4~5%). It is shown that in a water content measurement of the wood that is compressed after being softened by soaking in the flame proof agent, drying and heating at 3kW for 9 minutes, all specimens satisfied 12~14%, the appropriate water content for exterior wood. Also, it is shown that in terms of the flame performance obtained through a flame resistance treatment of the compressed wood and a treated material test, the specimen soaked in flame proof agent for 30 minutes was the most excellent, and that the performance test result of the compressed wood in all areas, such as nail withdrawal resistance, compression, bending strength, and shearing strength, were all improved in their mechanical features to twice to three times better performances.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.3
• /
• pp.201-210
• /
• 2013

The purpose of this study was to examine the species of 117 wooden elements which were used in the Daewungjeon Hall (National Treasure No. 805, constructed in A. D. 1659) of Bukjijangsa Temple, Daegu, Korea. Pillars were identified as 5 red pines (hard pines; most likely, Pinus densiflora S. et Z.), 2 Cerris section of subgenus Lepidobalanus (deciduous oaks) and 3 Tsuga spp. Hwalju columns were 3 Abies spp. and 1 red pine. Head-penetrating ties were 8 red pines and 1 Cerris sp.; Pyeongbang, 3 red pines and 6 Cerris spp. Purlins were identified as 17 red pines, 16 Cerris spp. and 1 Tsuga sp. Angle rafters were 3 red pines and 1 Cerris sp., and end angle rafters, 2 red pines, 1 Zelkova serrata and 1 exotic hard pine. All of brackets (31 woods), jangyeo (4) and deot-chunyeo (2) were identified as red pines. As a whole, red pines (70.1%) and Cerris (22.2%) were major species used in the Daewungjeon Hall of Bukjijangsa Temple. Tsuga, Abies and exotic hard pines seem imported woods used for recent repairs.

• Conservation Science in Museum
• /
• v.13
• /
• pp.33-36
• /
• 2012

Analysis of Flat board-shaped Lacquer ware excavated from Daho-ri was conducted. The result of species identification is identifed as Pinus spp. As a result of microscopic observation, lacquer fragment is consist of 5 layers and its thickness is about 100 ㎛. Infrared spectroscopy of the lacquer ware revealed that they had a very similar absorption band as refined lacquer, confirming that they were painted with lacquer. Result of Analysis for Circular metal ornament is alloy smelted by tin and lead. It is called Pewter. While The species of wooden objects investigated until now is broad-leaved tree; the species of flat board-shaped lacquer ware is conifer.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.96-108
• /
• 1982

Pinus is one of the most important species supplying domestic industrial timbers such as constitutional lumber, pulpwood, and mine props. It occupies nearly 50 percent of the total forest resources in Korea. With above conception, to develop this forest resources and to obtain the basic data on the reasonable and effective utilization of Pinus, this study was carried out. Five species (P. koraiensis S. et Z., P. densiflora S. et Z., P. thunbergii Parlat, P. densiflara far erecta, P. rigida Miller) grown in Kwangnoong experimental forest stand, Chungcheongnam-Do, and Gangwon-Do regions were selected as sample trees. Anatomical, physical, mechanical and chemical properties of them were investigated.