• Korean Journal of Environment and Ecology
• /
• v.20 no.2
• /
• pp.200-207
• /
• 2006

The objective of this study was to investigate the site and growth characteristics of Acer pictum var. mono growing in the deciduous stands at Mt. Joongwang area located in Pyungchanggun, Kangwon-do. A. pictum var. mono was mainly distributed at the rather steep slope and aspect facing from northeast to northwest, and altitudes ranging from 1,000 to 1,200m. It grew at relatively deep a soil layer with high moisture and nutrients. Major competing species in the upper stories were Betula costata, Acer mandshuricum, Quercus mongolica, Cornus controversa, and herb plants such as Meehania urtidfolia, Isodon excisus, Astilbe chinensis var. davidii, Dryopteris crassirhizoma and Ainsliaea acerifolia in the floor. The height growth was 0.25m in early time, decreased gradually and sustained growth of lower than 10cm. The diameter growth of A. pictum was under 1mm in early time, but increased to 0.3mm/yr and showed continuous growth of 2mm/yr recently. Annual volume growth showed rapid increased about age 120 and then showed stable growth, so the rotation period of A. pictum is expected more than 200 years without decay of heartwood.

• Conservation Science in Museum
• /
• v.27
• /
• pp.125-146
• /
• 2022

The Wooden Gamsil with Inscription of "Botajeon" in the collection of the Dongguk University Museum was made in imitation of the wooden architecture style of the late Joseon period. The Gamsil had suffered exfoliation in the pigment and loss of components and thus underwent conservation treatment. Prior to the conservation treatment, the damage was classified by type and form, scientific analysis was carried out on the fiber and the species of wood, and portable X-ray fluorescence (P-XRF) analysis was conducted for the pigment component analysis. According to the analyses, Korea Pine(Soft pine) was used for most parts of the Gamsil, Manchurian walnut (Jugalns spp.) was used for the signboard, and the fiber used was identified as rice straw (Oryza sativa). The P-XRF identified white lead and zinc oxide in the white pigment, red lead in the red pigment, ultramarine blue in the blue pigment, and emerald green in the green pigment. For the conservation treatment, contaminants attached to the gamsil were removed by both dry and wet cleaning, detached parts were reattached in their original places, and lost parts were restored.

• Journal of Korean Society of Forest Science
• /
• v.40 no.1
• /
• pp.63-69
• /
• 1978

A bark comprises about 10 to 20 percents of a typical log by volume, and is generally considered as an unwanted residue rather than a potential1y valuable resourses, As the world has been confronted with decreasing forest resources, natural resources pressure dictate that a bark should be a raw material instead of a waste. The utilization of the largely wasted bark of genus Pinus, Quercus, and Populus grown in Korea can be enhanced by learning their chemical properties. However, the chemical study of tree bark grown in korea have never been undertaken. In the present paper, the studies on the chemical properties of bark comprise carbohydrates, lignin, and extractives, composition of reducing sugars and five essential elements. The results may be summarized as follows: 1. Bark are much richer in quantity of lignin and extractives than the corresponding wood, and are chiefly consisted of lignin, extractives and carbohydrates orderly. It is the same with ash contents. Alcohol-benzene extractives of populus bark are the highest among three genus. 2. Although glucose constitutes the major sugar in both pine and hardwoods bark, in pinus, arabinose and xylose are the next but in hard woods, the next is xylose. 3. Essential elements, Ca and Kjeldahl-N are higher in the bark than in the wood. Ca content is the highest among others, and N,K followed it. Essential elements are higher in Quercus than in Populus and pinus.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.36-44
• /
• 2007

The purpose of this study was to investigate thermal stability, reactivity, and bonding strength of existing epoxy resin mixed with the epoxidized soybean oil (ESBO) in order to use soybean oil economically. In the dry shear test, the marked strengths showed $30.5kgf/cm^2$ at the ratio of ESBO to epoxy resin 9 : 1 and $6.2kgf/cm^2$ at the ratio 8 : 2. The bonding strengths of the others, except mixing ratios 2 : 8 and 1 : 9, exceeded the requirement of Korean plywood standard of $7.0kgf/cm^2$. In the wet shear test, the result was $5.8kgf/cm^2$ at the ratio 9 : 1. There were no thickness swelling and moisture absorption in the water resistance of the film. The value of activation energy, Tg (${\Delta}E$), by DSC analysis showed between $110^{\circ}C$ and $120^{\circ}C$ through all ratios. Epoxy in the epoxy resin fully reacted with the hardener (TETA), but it is difficult to decide that epoxys in the ESBO were reacted directly with the hardener from FT-IR analysis. As the mixing ratio of ESBO increased, the thermal stabilities dropped from TGA analysis. From the comprehensive view on the results of above experiments, it could be confirmed through experiments that the ESBO in the mixed adhesive of epoxy resin/ESBO played a role as an extending agent level of epoxy adhesive, and we were able to know that in order to utilize ESBO as an adhesive, a study should be performed on the condition of hardening, inducible of the hardening reaction.

• Journal of the Korean Home Economics Association
• /
• v.11 no.4
• /
• pp.424-435
• /
• 1973

This paper attempts to find out the development of designs of chairs in interiors. It will discussed by dividing into two periods; the pre-world war I, and the post-world war I up to date. In the first part it will concentrate on four types of design materjals; plywood, metal, solid wood, and plastic chairs. In the second part it will deal with only two materials; Metal and solid wood. Under each material one designer and manufacturer, the country where the designer worked, and related dates. It will discuss how the design materiai was exploited by each designer within its potentials including how chair was made, what design elements could do, whether he used the potentials, and the potentials were fully exploited. And it discusses the success of the chair design material as shown in the interiors or failure of the chair design material. Fainally under each material one picture of chairs, one or two pictures for the chairs in the interiors, of the chairs will be provided. A bibliography will be attached to the end of the paper.

• The Korean Journal of Mycology
• /
• v.41 no.1
• /
• pp.52-55
• /
• 2013

Phoma glomerata (Corda) Wollenw. & Hochapfel is a pathogenic fungus causing spot diseases of plant leaves and fruits. This fungus is important in plant quarantine of seedlings and fruits in Korea. The aim of this study was to develop a sensitive and effective diagnostic method for P. glomerata detection in imported plants. The fungal species-specific PCR primers were designed based on the nucleotide sequences of the translation elongation factor 1 alpha gene and their specificity and sensitivity were tested. The designed primers named as PhoGlo-F and PhoGlo-R amplified specifically a 170 bp sized DNA band of the target gene from the genomic DNA of P. glomerata. No amplicon was produced from genomic DNAs of 16 other Phoma spp. and reference fungal species tested. Moreover, PhoGlo-F/PhoGlo-R primers successfully worked with real-time PCR technique. The detection limit of DNA content by conventional and real-time PCR were 10 pg and 1pg of the genomic DNA of P. glomerata, respectively. We believed that the developed makers would be very useful for P. glomerata detection.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.247-258
• /
• 2010

We conducted optical microscopy, infra-red spectroscopy and SEM-EDS analysis of the lacquer layers on the wooden coffins excavated from King Muryeong's Tomb. We found four varnishing methods according to the sub-materials of lacquer layers: The lacquer of wooden coffins with black paint layer on the surface were classified with two groups; single layer and three layers. The lacquer of wooden coffins without black paint layer on the surface were classified with two groups; single layer and two layers. IR spectra of the laquer were same as those of the oriental laquer. The SEM-EDS analysis showed that the lacquer layers were mixed with iron, copper and calcium.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.3
• /
• pp.385-393
• /
• 2006

In Korea, the effective utilization of wod structure is encour aged to preserve natural resources and the global environment.ote demand for wod. The efective combination of structural la minated timber and other materials is expected to extend the potential of building structures. This research examines the moment resis tance-type jointing method using structural laminated timber and H-section stel aiming at development of the two-direction frame for lar ge 9 mm and 12 mm) of the H section. Therefore, we conducted the experiment with bending test of the joints to investigate the s tifnes, strength, strain distributions of laminated timber an d of the flange of the H section, and failure paterns. As shown in the results, t he joints with a flange thicknes of 9 mm and 12 m have superi or strength with a flange thicknes of 9 mm and 12 mm were very large, whic h confirmed the high level of energy absorption of such structure s.

• Journal of the Korean Society of Safety
• /
• v.21 no.2 s.74
• /
• pp.138-142
• /
• 2006

Occupational asthma is commonly known to be induced by isocyanate exposure. Spray painters generally use isocyanates for 2-pack spray painting to coat wooden panel surfaces in the furniture industry in South Australia. Due to a lack of actual exposure data, this study conducted environmental and dermal/ocular monitoring from a company in the furniture industry. According to this study, there was no significant airborne contamination, due to the use of high volume low pressure (HVLP) spray guns, low concentration of hardener in paint solutions and appropriate respirator like full face-air line respirator. There was no significant HDI detection in the general work area around the spray booths. Owing to the use of disposable nitrile gloves during the spray painting, no significant dermal exposure was found. According to color monitoring, there was a possible dermal exposure from surfaces in the workplace, unless either protective gloves were worn or appropriate working practices like clean-up process and storage in a secure places. No eye contamination was detected from the spray painters. No significant exposure levels from inhalational, dermal, ocular were found. The area of most concern was work practices.

• Microbiology and Biotechnology Letters
• /
• v.45 no.1
• /
• pp.1-11
• /
• 2017

In this review, we focus on one of the most attractive biomaterials, microfibrillated cellulose (MFC). MFC, a type of nanocellulose, mainly originates from cellulose in lignocellulosic biomass. MFC represents one of incredible important natural resources due to its abundancy, renewability, and sustainability. MFC is produced through mechanical pretreatment, and it is composed of various sizes of microfibers, ranging from a few nanometers to a few micrometers. Because of the heterogenetic compositions of MFC, it possesses superior properties as a material, such as high surface area, high aspect ratio, and peculiar insolubility as a biomaterial. These properties allow MFC to be used in various bio-industries, from the traditional pulp industry to the high-tech food/bio/chemical/medical industries. However, it is difficult to use MFC on a commercial scale owing to the high energy input required during its production and the challenge of controlling its reactivity. Therefore, future studies should be focused on accurately characterizing MFC's surface morphologies, regulating its characteristics in a desirable direction, and standardizing proper guidelines for the analysis of surface morphologies its analysis.