• Journal of the Korean Wood Science and Technology
• /
• v.33 no.4 s.132
• /
• pp.30-37
• /
• 2005

Heating and Steaming treatments were carried for deresinning and color change of radiata pine juvenile wood. The boards of 20 mm and 30 mm thicknesses were heat-treated at $150^{\circ}C$ and $220^{\circ}C$ for 2, 4 and 6 hours and steamed at $100^{\circ}C$ for 6, 24 and 48 hours. For extracting residual resin in treated boards and measuring wood surface color, alcohol-benzene solution and a portable colorimeter were used, respectively. The board of 20 mm thickness were deresined effectively by heating at over $150^{\circ}C$ for 2 hours or steaming for 6 hours while that of 30 mm thickness by steaming for 48 hours. For the board of 30 mm thickness treatment time was more influencing on deresinning than treatment temperature. The steamed boards showed higher $L^*$ than the heat-treated for both thicknesses. $L^*$ decreased with the increase of treatment temperature and time, but for the board heat-treated at $220^{\circ}C$ it didn't change after 4 hours. The surface color of the boards heat-treated at $220^{\circ}C$ for 4 and 6 hours were obviously changed, but those at $150^{\circ}C$ were not. It was revealed that the core of the heat-treated board was color changed as well as the surface.

• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.78-84
• /
• 2011

In this study, we have measured the charring rate of solid sawn timber as a preceding step for develop performance based fire safety design method of wood framed building structures. The follows are the summary of fire test results carried out with $400{\times}400$ mm cross-section Douglas-fir in varied of thickness and grain directions. I) When the timber thickness increase under same dimension, the charring rate decreases gradually. It is seemed the charring layer up on a thickness roles as a insulation, gives combustion delaying time to specimen. 2) The charring rates measured at different depths (10, 20, 30, 40 mm) in timber which varying thickness (20, 40, 80, 120 mm) when exposed maximum 1 hour standard fire increase by 30 mm depth, but decrease at 40 mm. It is seemed the minimum charr layer should be 30 mm for having role of insulation. 3) The charring rate of cross section surface (direction of perpendicular to grain) was more high than that of grain direction. It can be explained by the cracks and gaps from greater charr contraction made more heat flux incident into timber.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.3 s.174
• /
• pp.752-760
• /
• 2000

Mechanical press joining has been used in sheet metal joining processes because of its simple process and possibility of joining dissimilar metals, such as steel and aluminum. The strength of mechanical press joining varies with joining conditions. The optimum joining conditions considering tensile-shear and peel-tension strength have to be established to assure the reliability in the joining strength. Therefore, optimization of joining conditions has been investigated for improving joining strength of sheet metal. It is possible to obtain optimum strength from improvement on the joining strength of peel-tension mechanical press joint under multiaxial stress states.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.5 s.170
• /
• pp.121-129
• /
• 2005

Lever mechanisms are usually employed to enlarge output displacements in precision stages. In this study, theoretical analysis is done for a precision stage employing a lever and flexure hinges, including bending effect. This study presented relations between design parameters and magnification ratio. This study presents optimal values for the parameters to achieve a longer stage displacement. The analysis is verified by finite element analysis. It is found that adjusting stiffnesses can increase the travel range significantly.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.5
• /
• pp.476-482
• /
• 2009

The effect of pintle shape on the thrust level of pintle-nozzle Solid Rocket Motor(PNSRM) was studied numerically using the Spalart-Allmaras turbulent model of Fluent. Mass flow rate of PNSRM was always less than theoretical value and the extent of decrease in mass flow rate grew in the large pintle because of increase in the relative boundary layer thickness between pintle body and nozzle wall. The bigger pintle size was, the more thrust of pintle tip pressure was obtained. Meanwhile the more thrust of nozzle and chamber pressure decreased. Hence, total thrust of big pintle was less than a small pintle under same throat area condition. Specific impulse was relatively flat for all pintle shape.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.7-14
• /
• 1996

두께가 20mm와 30mm이고 폭이 40mm와 60mm 인 길이 600mm의 낙엽송 제재목에 응력파 시험과 휨강도 시험을 실시하였다. 모든 시험편은 생재 상태로 구입 후 함수율 약 13%로 조습 처리하여 응력파 시험과 휨강도 시험을 시행하였다. 휨 영계수와 휨강도는 두께가 큰 것이 작게 나타났다. 최상의 상관관계는 휨 영계수와 양 표면에서 구한 값의 평균값을 사용한 응력파 속도 및 영계수 사이에 나타났다. 휨 영계수와 관계에서 응력파 영계수는 응역파 속도 보다 더 확연한 옹이의 영향을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.26-35
• /
• 1996

4군데의 임반에서 선발된 라디에타 소나무를 공시목으로 두께 2.6mm 와 1.4mm의 단판을 제작하였다. 단판을 조합하여 만들어진 합판의 크기는 $1200mm{\times}2400mm{\times}12.5mm$이었다. 단판의 등급과 합판의 강도적 성질은 원목의 성질과 깊은 관계가 있으며, 원목의 밀도는 합판의 성질을 결정하는 중요한 인자가 되었다.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.4
• /
• pp.39-44
• /
• 1997

4군데의 임반에서 선발된 라디에타 소나무를 공시목으로 두께 2.6mm와 1.4mm의 단판을 제작하였다. 단판을 조합하여 만들어진 합판의 크기는 $1200{\times}2400{\times}12.5mm$이었다. 12.5mm의 합판으로 단판의 성질에 따른 합판의 굽음을 조사하였던 바 단판의 성질과 합판의 굽음과의 관계는 낮은 상관관계를 보였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.275.2-275.2
• /
• 2016

본 연구에서는 pilot급 대면적 roll-to-roll 스퍼터를 이용하여 상온에서 제작한 ITO/Cu/ITO 다층 투명 전극의 유연 투명 히터 적용 가능성과 투명 전극의 면저항이 히터의 input 전압에 미치는 영향을 연구하였다. 상부/하부 ITO 두께를 35 nm로 고정하고 Cu interlayer의 두께를 변수(4 nm~ 12 nm)로 하여 제작한 ITO/Cu/ITO 다층 투명 전극의 전기적, 광학적, 구조적, 표면 특성을 분석하고 삽입된 Cu의 역할을 연구하였다. Cu 두께의 증가에 따라 면저항은 25.4 Ohm/square에서 5.80 Ohm/square로 급격히 감소하나 투과도 역시 75.51%에서 62.62%로 감소하였다. 유연 투명 히터에 적용하기 위해 최적화된 ITO/Cu/ITO 다층 박막의 유연성을 다양한 밴딩 테스트를 통해 분석하였으며, 10,000번의 반복 굽힘 시험에도 저항의 변화가 없음을 관찰 할 수 있었다. 이러한 저저항, 고투과, 고유연 ITO/Cu/ITO 다층 투명 전극을 이용하여 유연 투명 히터를 제작하였으며, Cu interlayer의 두께에 따른 유연 투명 히터의 발열 특성을 평가하였다. 유연 투명 히터의 온도를 100도에 이르게 하기 위한 Saturation input voltage는 투명 전극의 면저항에 가장 크게 영향을 받았고, 면저항이 낮아질수록 더 낮은 saturation input voltage에서 100도에 도달함을 알 수 있었다. Cu interlayer의 두께가 12 nm 일 때에는 6V의 input voltage로도 유연 투명 히터의 온도가 100도에 도달함 알 수 있었다. 이를 통해 roll-to-roll 스퍼터로 제작된 대면적 ITO/Cu/ITO 다층 투명 전극이 차세대 유연 투명 히터용 투명 전극으로 적용 가능성이 매우 높음을 확인하였다.

• Journal of Digital Convergence
• /
• v.15 no.8
• /
• pp.465-476
• /
• 2017

This study attempted to investigate the effects of gold therapy on myofascial pain syndrome(MPS) in the neck, back and shoulder in comparison to stone therapy and verify its availability as an efficient nursing mediator in clinical trials. For this, therapy was given to a total of 20 women in two groups (gold therapy group, stone therapy group: 10 persons each) living in the capital region three times a week (40 min. at a time) for two weeks. In both groups, a statistically significant decrease was found in the following after the treatment: neck circumference, shoulder width, width of the inferior angle of scapula, shoulder thickness and waist circumference (p<0.001). In terms of differences, the gold therapy group was greater than the stone therapy group. In both groups, a statistically significant increase was observed after treatment in the following: cervical lateral bending (right), cervical lateral bending (left), cervical flexion and cervical extension angle (p<0.001). In terms of differences, the gold therapy group was greater than the stone therapy group. In conclusion, this study seems to show that gold therapy is a nursing intervention option having effective fascial relaxation and pain relief for the neck, back and shoulder. Therefore, it would be valuable as safe, non-invasive therapy.