• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.9
• /
• pp.1643-1653
• /
• 1992

A method, which uses analytical or numerical modal analysis results, e.g. from finite element analysis, to select desirable response measurement and excitation points for an efficient modal testing is introduced. First, points of master degree of freedom(DOP) are determined so as to statistically minimize errors between responses of a full order model and those estimated from the reduced order model. Such master DOF's are selected as the response measurement points. Then a criterion named 'driving point model constant(DPMC)' related to the magnitudes of resonance peaks of the driving point freqency response functions used to select the point of excitation out of the master DOF's. In this work, the method is demonstrated through applications to modal testing on a one dimensional cantilever beam and an aluminum plate and the results are compared with those by another technique. also, the method is applied to a two dimensional structural component of a passenger car.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.1
• /
• pp.58-65
• /
• 2007

Mixed mode interlaminar fracture behaviors of carbon fabric/epoxy composites were investigated through MMF (Mixed Mode Flexural) test by varying mixed mode ratio ranging from 20% to 90%. Mixed mode interlaminar fracture criteria based on NL point and 5% offset point were also suggested in order to predict mixed mode interlaminar fracture behaviors. Fracture surfaces and crack propagating behaviors were examined through a travelling scope and a scanning electron microscope. According to the results, mixed mode interlaminar fracture behaviors can be predicted by mixed mode interlaminar fracture criterion with m=1.5 and n=0.5 on the basis of NL point or mixed mode interlaminar fracture criterion with m=2 and n=3 on the basis of 5% offset point. Fracture surfaces and crack propagating behaviors are sensitive to mixed mode ratios. MMF test can be successfully applicable in evaluating mixed mode interlaminar fracture toughness of carbon fabric/epoxy composites.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.1
• /
• pp.12-19
• /
• 1993

진동시험 동안 구조물은 진동시험기로부터 높은 진동에너지를 받게 되는데 공급되는 에너지를 시험물에 전달하기 위해서는 시험물에 따라 다양한 종류의 진동시험치구가 필요하게 된다. 이중에서 T-형상 진동시험치구는 진동시험축에 대해 3방향으로 시험물을 설치할 수 있고, 형상이 간단하며, 또한 값이 저렴하므로 많은 설계자들은 T-형상 치구를 설계하여 사용한다. 그러나 이 치구는 수직판이 어떤 주파수에서 평판처럼 공진현상을 일으키기 때문에 동역학적으로 설계하기가 어렵다. 본 논문에서는 진동시험치구의 기능을 향상시키기 위해 모우드 시험(Model Testing)기법을 사용하는 방법과 시험결과를 근거로 설계변경을 위해 수직보강판, 수평보강판, 그리고 천연 고무패드를 사용하여 이것들이 치구의 동특성에 미치는 영향을 기술하며 그 결과를 치구설계 때 응용 가능하도록 한다.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.4
• /
• pp.81-90
• /
• 2008

This paper presents a finite element formulation for the three-dimensional hierarchical solid element using Integrals of Legendre polynomials. The proposed hexahedral solid element is composed of four different modes including vertex, edge, face, and internal mode, respectively. The eigenvalue and patch test have been carried out to confirm the zero-energy mode and constant strain condition. In addition to these, a posteriori error estimation has been studied for the p-adaptive finite element analysis that is based on a smoothing technique to compute a post-processed solution from the finite element solution. The uniform p-refinement and non-uniform p-refinement are compared in terms of convergence rate as the number of degree of freedom is increased. The simple cantilever beam is tested to show the performance of the proposed solid element.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.461-471
• /
• 1989

For the mixed-mode crack problems the direction of crack growth, the crack path and the rational representation of fatigue crack growth rates should be studied to predict fatigue life and safety of structures. In this study, a round specimen which produce nearly identical effects in all loading directions is proposed to make an easy measurement of initial direction of crack growth. The mode I and mode II stress intensity factors of the specimen were calculated using finite element method, in which the square root singular stresses at the crack tip are modeled by means of four rectangular quarter-point eight-noded elements surrounding the crack tip. Experimental results for high strength aluminum alloy showed that the direction of mixed-mode crack growth agree well with maximum principal stress criterion as well as minimum strain energy density criterion, but not with maximum shear stress criterion. From data of fatigue crack growth rates using crack geometry projected on the line perpendicular to the loading direction it is easily established that mixed-mode fatigue crack growth in 5083-H115 aluminum alloy goes predominantly with mode I crack growth behaviors.

• 전기의세계
• /
• v.28 no.6
• /
• pp.3-10
• /
• 1979

여기서는 마이크로컴퓨터의 시험법에 관해서 현재시판되고 있는 시험기와 함께 소개하고 단일 칩마이크로컴퓨터에 관해서 실시하고 있는 시험 패턴 설계예를 약간 상세히 기술한다. 또 마이크로컴퓨터용 LSI의 고장모우드, 고장메카니즘의 분류및 고장율, 신뢰성의 현장과 문제점에 관해서 기술함과 동시에 초기불량을 제거하여 신뢰성을 향상시키는 수단으로서의 스크리닝(screening)및 신뢰도예측에 관해서 소개하고 현장에 있어서의 문제점과 대책에 관해서 논의한다.

• Computational Structural Engineering
• /
• v.5 no.3
• /
• pp.105-112
• /
• 1992

The design of reactor internals requires the accurate vibration characteristics of each component for subsequent dynamic structural response analysis. For Korean standard nuclear power plant some modifications on the Control Element Assembly shroud from the reference design have been made. Since the shroud is complex in geometry having an array of vertical round tubes and webs in a square grid pattern, and being tied down by preloaded tie rods into position, it is planned to perform a vibration measurement program consisting of both experimental and analytical modal studies upon that component. To determine the proper test conditions, the pre-test analysis has been performed using the general purpose structural analysis program ANSYS. Also the effects of the number of master degrees of freedom, holes in the web and tie-rod preload on the natural frequencies are examined prior to the pre-test analysis. After decision of appropriate finite element model, frequency analysis and harmonic analysis are performed and ideas for the test conditions such as the number of measurement points, their locations, measurement frequency range and the excitation force level are determined.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.397-403
• /
• 1989

A slight asymmetry exists in Korean beslls due to decorative sculptures, carved figures and casting irregularities. In this study, the influence of the asymmetry on the bell's best frequencies and mode shapes is studied by using finite element method and modal testing. Also measurement techniques of nodal lines and damping ratios of bells with very small beat frequencies are discussed.

• Computational Structural Engineering
• /
• v.5 no.4
• /
• pp.93-102
• /
• 1992

The design of reactor internals requires the accurate vibration characteristics of each component for subsequent dynamic structural response analyses. For Korean standard nuclear power plant some modifications on the Control Element Assembly shroud from the reference design have been made, Since the shroud is complex in geometry having an array of vertical round tubes and webs in a square grid pattern, and being tied down by preloaded tie rods into position, it is planned to perform a vibration measurement program consisting of both experimental and analytical modal studies upon that component. The shroud modal testing was performed on the low frequency global survey to measure the first several modes. The analysis using the finite element model was also performed for the as-tested conditions. The natural frequencies and mode shapes from both test and analysis have been acquired and compared to be in good agreement. It is concluded that finite element model generated is good enough to be used in the design for the dynamic response analysis under various loading conditions.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.327-332
• /
• 1997

We fabricated the high speed 1.55${\mu}{\textrm}{m}$ distributed feedback laser diodes (DFB-LD) using both two-step mesa etching process and semi-insulating InP current blocking layers. The devices characteristics were threshold current of ~15mA, slope efficiency of ~0.13mW/mA, and dynamic resistance of ~6.0Ω, with as-cleaved facets. The fabricated DFB-LD showed the single longitudinal mode with more than 40dB up to 6 $I_{th}$(CW condition), emitting at the wavelength of 0.546${\mu}{\textrm}{m}$. The -3dB bandwidth was >10㎓ at the driving current of 27mA, and the maximum -3dB bandwidth was ~18㎓ at 90 mA current, showing the superior frequency response of SI-PBH DFB-LD. In the 10Gb/s transmission experiment for 1.55${\mu}{\textrm}{m}$ DFB-LD module, maximum 10 km of single mode fiber(SMF) or 80 km of dispersion shifted fiber (DSF) could be transmitted with error free.