• (The)Study of the Eastern Classic
• /
• no.72
• /
• pp.67-95
• /
• 2018

Gyeong-san(經山) Jeong Won-yong(鄭元容, 1783~1873) passed the state examination in 1802(純祖 2), and he has been in office for about 70 years. Jeong Won-yong with excellent administrative ability, he was an important figure in the Sedo politics, and was recognized by many writers for his outstanding writings. Nevertheless, his research results are small. This paper studyed his literary theories as a preliminary to look at Jeong Won-yong's literature in general After examining the features of Jeong Won-yong, there were three main aspects. First, Jeong Won-yong had a negative view of imitation. In particular, he stressed that he should oppose the attitude of unconditionally following Go-in(古人) without considering his capabilities and express his intention. Second, Jeong Won-yong pursued Jin-ui(眞意) when he wrote a poem. He thought rather than think that it is important to decorate a poem, it is important that emotion is exposed to the poem in a natural way. And he tried to unfold his individuality in the poem without copying others. Because if he imitate someone else when he write a poem, it is hard to express his thinking. His negative view of imitation and he pursued Jin-ui(眞意) are closely related. Lastly, Jeong Won-yong considered records important. Jeong Won-yong's record spirit is deeply related to his government service life. Jeong Won-yong who had been in government service all his life, hoped his experience would help manage the country. That's why he thought records were very important. And through this recording behavior, he wanted to get help later on. So it seems that he left a vast works.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.5
• /
• pp.219-224
• /
• 2015

In this paper, the designed fish robots DOMI ver1.0 is researched and development for aquarium underwater robot. The presented fish robot consists of the head, 1'st stage body, 2nd stage body and tail, which is connected two point driving joints. The model of the robot fish is analysis to maximize the momentum of the robot fish and the body of the robot is designed through the analysis of the biological fish swimming. Also, Lighthill was applied to the kinematics analysis of robot fish swimming algorithms, we are applied to the approximate method of the streamer model that utilizes techniques mimic the biological fish. The swimming robot has two operating mode such as manual and autonomous operation modes. In manual mode the fish robot is operated to using the RF transceiver, and in autonomous mode the robot is controlled by microprocessor board that is consist PSD sensor for the object recognition and avoidance. In order to the submerged and emerged, the robot has the bladder device in a head portion. The robot gravity center weight is transferred to a one-axis sliding and it is possible to the submerged and emerged of DOMI robot by the breath unit. It was verified by the performance test of this design robot DOMI ver1.0. It was confirmed that excellent performance, such as driving force, durability and water resistance through the underwater field test.

• Journal of Christian Education in Korea
• /
• v.61
• /
• pp.81-107
• /
• 2020

This study reviews Bandura's vicarious reinforcement in observational learning process and implies this concept into Christian education in terms of spiritual role modeling. The first part of this study answers three questions: "what is vicarious reinforcement?" "how does vicarious reinforcement take place in observational learning?" and "how does vicarious reinforcement affect observer's behavior change?" Bandura conceptualizes the learning process with observational learning and imitative or non-imitative performance. Based on this concept, Bandura define the roles of vicarious reinforcement in the four steps of observational learning process: attention, retention, motor reproduction, and motivational process. Also, the three effects of vicarious reinforcements are explained in the following categories: the observational learning effect, inhibitory or disinhibitory effects, and eliciting effect. Adapting the structure of observational learning theory in terms of the effect of vicarious reinforcement and the function of role models, the second part of this study examines the biblical concept of imitation of Christ and the modeling strategy of discipleship. Especially Paul's spiritual role model serves as positive vicarious reinforcement for the Christian believers to perform the desired behaviors. Also, Paul's condemnation serves as explicit negative vicarious reinforcement. Then, the last part of this study covers the implication of these findings from observational learning and empirical studies in terms of spiritual role modeling to Christian education.

• Archives of design research
• /
• v.14 no.3
• /
• pp.145-154
• /
• 2001

These days, the products like Walkman, mobile phone, notebook PC, PDA are moving together with our body, and in the imaginary world like internet, our other self, Avatar is moving in place of our body on the cyber world. These products are related with our human body, and when considering the ones, attached to the human body, and having the meaning of mental combination like these, as the combination of the human and the products, it is necessary to examine these products in approaching them with respect to the combination relation between the human and the products. As a result of examining we can understand that the products, said to combine with the human body, are coming oui steadily. and recently, the inclination on the combination and the movement appears strongly. As this background, there are a breakdown of dichotomy thought, mixed sexual imitation, cyber culture, techno culture. concept of informative nomands, phenomenon which the division of human and machine becomes vague. and the miniaturization of products. imitation of human, phenomenon that the Inclination on the combination with human is more accelerated by networking. These products combine with human body at each wearing type in the various forms. Its functions become multi-layered, and closer to the human body physically. or its communication becomes high·graded and, they have the recombined form through the existing products which the human has And, they communicate each other. have the strong fashionable property, and the characteristics like the imaginary product to imitate the human body and substitute for the human behave.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.9
• /
• pp.765-772
• /
• 2015

Aerodynamic force measurements and phase-locked PIV study were carried out to check the bio-mimetic MAV applicability of a swift flight. Two-rotational DOF robotic wing model and blowing-type wind tunnel were employed. The amplitude of twist angle were ${\pm}0$, ${\pm}5$, ${\pm}10$, and ${\pm}20$ deg. and stroke angles were manipulated by simple harmonic function with out-of-phase in regards to the stroke motion. It is acknowledged that the time-varying lift coefficients in accordance with the change of the twist angle did not result in any noticeable differences, just the small decrease and delay. However, the drag exhibited that the small change of the twist angle can produce large thrust. These findings imply why a swift uses small twist angle during flight. The PIV results displayed that the delay of aerodynamic forces is highly associated with the vortical structures around the wing. It is therefore indicated that a process of designing a swift-based Micro Air Vehicle should take the twist angle into consideration, as the essential parameter.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.317-322
• /
• 2015

Salinity gradient power is a system which sustainably generates electricity for 24 hrs, if the system is constructed at a certain place where both seawater and river water are consistently pumped. Since power is critically determined by the water flux and the salt rejection, a membrane of water-semipermeable aquaporin protein in cell membranes was studied for pressure-retarded osmosis. NaCl was used as a salt, and $NaNO_3$ was used as a candidate to check the ion selectivity. The water flux of biomimetic aquaporin membranes was negligible at a concentration below 2M. Also, there is no remarkable dependence of water flux and ion selectivity on concentrations higher than 3M. Therefore, the biomimetic aquaporin membrane could not be applied into pressure-retarded osmosis; however, if a membrane could overcome the current limitations, the properties shown by natural cells could be accomplished.

• Geophysics and Geophysical Exploration
• /
• v.17 no.4
• /
• pp.216-230
• /
• 2014

Based on the interpretation of 3D seismic profiles acquired in the northwestern area of the Ulleung Basin, East Sea, the shallow sediments consist of five seismic units separated by regional reflectors. An anticline is present in the study area that documents activity of many faults. Bottom simulating reflectors are characterized by high RMS amplitude. Acoustic blanking with low RMS amplitude is distinctively recognized in the gas hydrate stability zone. Seismic attribute analysis shows that if gas hydrates are underlain by free gas, the high reflection strength and the low instantaneous frequency are displayed below the boundary between them. Whereas, if not, the reflection strength is low and instantaneous frequency is high continuously below the gas hydrate zone. Based on the spectral decomposition of the bottom simulating reflector, the high envelope at the specific high frequency range indicates the generation of the tuning effect due to the lower free gas content. Four models for the occurrence of the gas hydrate are suggested considering the slope of sedimentary layers as well as the presence of gas hydrate or free gas.

• Archives of design research
• /
• v.17 no.4
• /
• pp.27-36
• /
• 2004

The protection of intellectual property right in international conventions are worldwide or regional areas already exists a century. Therefore, our country is positive affiliated with international conventions. After that time, such as a violation of international convention and an example of imitations are continually that we prognosticate the international trade market activities was difficult not only became an issue of country credit risk. At this point, the major purpose of this study make an analysis of both paralleled with the case study follow an example and the comprehension with concerned about recognition of intellectual property right. In additionally, it stands a plan of package design protections under the WTO systems. This study have carried out a theoretical and practical analysis of intellectual property right and statistical analysis through the inside and outside of the country packaging design study and a case study of troubles with intellectual property. Besides, it is accomplish the purpose of the study that established exploratory study survey about inside and outside of the country packaging design infringement case study and relative package design industry employees with consumptions real research. I hoped that this study will be a foundation on which packaging, design industry protections to intellectual property right.

• Science of Emotion and Sensibility
• /
• v.15 no.1
• /
• pp.141-148
• /
• 2012

This study investigated the structural coloration and fabric hand of the caustic reduced fabrics for emotional garment using structural color yarns, which was spun by 37 alternating nylon and polyester layers capable of producing basic colors using biomimetic technology. The colorations of the three kinds of structural color yarns were confirmed using multi angle spectro-photometer, and their triangular cross sections composed with 37 alternating nylon and polyester layers were measured using SEM and were discussed with layer length in relation with coloration and spinning conditions were also set up. The apparent color difference and reflectance of the three kinds of fabrics with different density and weave pattern were analysed as ranging from 400nm to 700nm. The optimum fabric structural design which is made by warp and weft densities(194ends/in ${\times}$ 105picks/in) and caustic reduction condition by $100^{\circ}C$ temperature and 60minutes with NaOH, 20g/l solution were decided through analysis of the mechanical properties and fabric hands of these three kinds of fabrics treated with 3 kinds of the caustic reduction conditions. And it was shown that the rate of caustic reduction was increased from 13% to 23% with increasing temperature and time of caustic reduction. The extensibility, bending rigidity and shear modulus of caustic reduction treated fabrics were decreased by treatment of caustic reduction, on the other hand fabric compressibility was increased. And it was shown that the hand value of specimen number one which was treated with temperature $100^{\circ}C$ and time 60minute was the best and the hand of this fabric was better than that of Morpho $fabric^{(R)}$ made by Teijin co. Japan.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.9
• /
• pp.712-722
• /
• 2018

This paper conducts parametric studies on flapping wing design, one of the most important design parameters of insect-mimicking aerial vehicles. Experimental study on wing shape was done through comparison and analysis of thrust, pitching moment, power consumption, and thrust-to-power ratio. A two-axis balance and hall sensor measure force and moment, and flapping frequency, respectively. Wing configuration is biplane configuration which can develop clap and fling effect. A reference wing shape is a simplified dragonfly's wing and studies on aspect ratio and wing area were implemented. As a result, thrust, pitching moment, and power consumption tend to increase as aspect ratio and area increase. Also, it is found that the flapping mechanism was not normally operated when the main wing has an aspect ratio or area more than each certain value. Finally, the wing shape is determined by comparing thrust-to-power ratio of all wings satisfying the required minimum thrust. However, the stability is not secured due to moment generated by disaccord between thrust line and center of gravity. To cope with this, aerodynamic dampers are used at the top and bottom of the fuselage; then, indoor flight test was attempted for indirect performance verification of the parametric study of the main wing.