• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.230-236
• /
• 2020

In this study, an adhesive tape with water and impact resistance for mobile devices was developed using a UV-curable urethane acrylate based polymer as a substrate. The substrate fabricated by UV-curable materials shows hydrophobicity and poor wettability, which significantly deteriorates the interface-adhesions between the substrate and acrylic adhesive. In order to improve the interface adhesion, 3-glycidoxy-propyl trimethoxysilane (GPTMS), a silane coupling agent having epoxy functional groups, was selected and incorporated into UV-curable urethane acrylate based polymer resins in various contents. The changes of the chemical composition according to the contents of GPTMS was studied with Fourier-transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) to know the surface bonding properties. Also mechanical properties of the substrate were characterized by tensile strength, gel fraction and water contact angle measurements. The peel strengths at 180° and 90° were measured to compare the adhesion between the substrate and adhesive according to the silane coupling agent contents. The mechanical strength of the urethane acrylate adhesive tape decreased as the silane coupling agent increased, but the adhesion between the substrate and adhesives increased remarkably at an appropriate content of 0.5~1 wt%.

• The Journal of the Korea Contents Association
• /
• v.19 no.4
• /
• pp.41-53
• /
• 2019

As the paradigm of healthcare shifts from the center of treatment to the center of prevention, products and services related to disease prevention are emerging at domestic and abroad. The government considers the smart healthcare industry as a solution to healthcare problems such as an increase in the number of chronic illnesses and an increase in the burden of medical expenses. The purpose of this study is to explore the factors affecting the use of smart healthcare products and services focusing on Health Literacy and health related personal characteristics and to provide policy implications. The subjects of the questionnaire are 1,027 adults over 20 in the nation, and conducted an online survey. In addition, the factors were analyzed by decision tree method. As a result, most of the respondents(76.9%) did not have experience using Smart Healthcare products and services. However, in the Health Literacy question, there was a difference in use experience depending on the degree of difficulty in using the mass media information. Other factors were the degree of intention to use new technology, the understanding of counseling about family members and friends, and health checkups. In order to enable self-healthcare through smart healthcare products and services, the ability of consumers to explore and utilize health information from the mass media should be improved. In addition, government and enterprise efforts are needed to achieve this.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.1-10
• /
• 2019

In terms of realizing the future e-government such as intelligent government, this paper attempts to provide an earnest and insightful reflection and suggests desirable strategies with regard to the four different crucial elements including electronic voting, electronic contract, resident registration/electronic document management, and real-estate registration as an operating strategy of intelligent government and the fourth industrial revolution regarding. The 4th industrial revolution is aimed at concentrating information or data characterized with sharing, opening, communicating and releasing in cloud computing system, analyzing big data, collecting information, and flourishing people's well-being by information and communications technology with utilizing the smart devices. Therefore, reliability of the pivotal information or data is critical and it is important for the participants being transparently shared, without the data or information being forged. In this respect, introduction or application of block chain technology is essential. This paper will review preceding studies, discuss the aspect of the 4th industrial revolution and intelligent government, then suggest operating strategies in the field of electronic voting, electronic contract, management of resident registration and electronic document and real-estate registration.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.256-259
• /
• 2016

The growth of mobile devices in Internet of Things (IoT) leads to a number of intelligent buildings related IoT applications. For instance, home automation controlling system uses client system such web apps on smartphone or web service to access the home server by sending control commands. The home server receives the command, then controls for instance the light system. The gateway based RESTful technology responsible for handling clients' requests attests an internet latency in case a large number of clients' requests submit toward the gateway increases. In this paper, we propose the design tasks of the IoT gateway for handling concurrency events. In the procedure of designing tasks, concurrency is best understood by employing multiple levels of abstraction. The way that is eminently to accomplish concurrency is to build an object-oriented environment with support for messages passing between concurrent objects. We also investigate the performance of event-driven architecture for building IoT gateway using node.js on one side and communication protocol based message-oriented middleware known as XMPP to handle communications of intelligent building control devices connected to the gateway through a centralized hub. The Node.JS is 40% faster than the traditional web server side features thread-based approach. The use of Node.js server-side handles a large number of clients' requests, then therefore, reduces delay in performing predefined actions automatically in intelligent building IoT environment.

• Science of Emotion and Sensibility
• /
• v.22 no.2
• /
• pp.17-28
• /
• 2019

The touchscreen device is now commonly found in the form of mobile phones, tablet PCs, and other devices. Varied physical and visual experiences can be experienced through touchscreens. This study intended to explore how the physical and visual experiences provided by the touchscreen would affect people through their existing associations of behavior-attitude. Previous studies have found that certain behaviors affect attitudes. In particular, the approach-avoidance behavior has been noted to influence both social and personal attitudes. It was thus deemed necessary to ascertain the approach-avoidance effect exerted by touchscreens on the attitudes of users as the technology is widely used today. Experiment 1 provided an approach-avoidance experience via a touchscreen and demonstrated that touchscreen-based approach-avoidance dragging behavior on the touchscreen can affect a user's preference and purchase intent. It was found that a product that had been approached showed both higher preference and higher purchase intent than a product that had been avoided. Experiment 2 investigated whether a similar effect would occur when only the visual experience of approach-avoidance was provided. The outcome proved that products that had been visually approached had higher scores than products that had been avoided, both in terms of preference and purchase intent. The movement of the arm on the touchscreen (Experiment 1) and the visual perception of the approach-avoidance experience (Experiment 2) were both shown to influence participants' attitudes toward products. The results of this study suggest that the behavior and perception of users may be an important factor in designing touchscreen interfaces for online shopping.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.503-509
• /
• 2019

The demand for smaller, faster, and multi-functional mobile devices in increasing at a rapidly increasing rate. In response to these trends, Stacked Chip Scale Package (SCSP) is used widely in the assembly industry. A film type adhesive called die attach film (DAF) is used widely for bonding chips in SCSP. The DAF requires high flowability at high die attachment temperatures for bonding chips on organic substrates, where the DAF needs to feel the gap depth, or for bonding the same sized dies, where the DAF needs to penetrate bonding wires. In this study, the mixture design of experiment (DOE) was performed for three raw materials to obtain the optimized DAF recipe for low elastic modulus at high temperature. Three components are acrylic polymer (SG-P3) and two solid epoxy resins (YD011 and YDCN500-1P) with different softening points. According to the DOE results, the elastic modulus at high temperature was influenced greatly by SG-P3. The elastic modulus at $100^{\circ}C$ decreased from 1.0 MPa to 0.2 MPa as the amount of SG-P3 was decreased by 20%. In contrast, the elastic modulus at room temperature was dominated by YD011, an epoxy with a higher softening point. The optimized DAF recipe showed approximately 98.4% pickup performance when a UV dicing tape was used. A DAF crack that occurred in curing was effectively suppressed through optimization of the cure accelerator amount and two-step cure schedule. The imizadole type accelerator showed better performance than the amine type accelerator.

• Journal of Digital Convergence
• /
• v.19 no.1
• /
• pp.77-88
• /
• 2021

Cloud computing is getting a lot of attention by many people and businesses due to IT environmental changes such as the proliferation of smart devices, the increase of digital data, and the cost of IT resources. More individuals use personal cloud computing services for storing and managing information and data. Therefore, this study proposed determinants that are expected to have an influence on evaluating the value of cloud computing based on the value-based adoption model, examining the relationship between the continuous use intention of cloud computing. Results of the study show that usefulness, convenience of information access, extensibility had a positive impact on perceived value while privacy concerns and costs had a negative impact on perceived value. In addition, perceived value was found to have a significant effect on the intention to continue use of cloud computing. Finally, trust was found to have a significant effect on the perceived value and the intention to continue use of cloud computing. The findings are expected to provide useful information for understanding the factors that individual users consider important in the steadily growing cloud computing market.

• Journal of Digital Convergence
• /
• v.18 no.12
• /
• pp.565-570
• /
• 2020

This paper was intended to present a way to incorporate Korean content and products of Korean brands into functional coloring games that color them for the continued development of digital hallyu at this time of the world's derivation, as shown by the Korean Wave, a word that means more and more people like Korean culture worldwide. For the development of the Korean digital convergence functional game industry that can solve users' leisure time, we will compare and analyze the advanced image cuts provided by coloring games that have been commercialized and serviced, and seek ways to utilize the image of Hallyu contents that are not provided in existing coloring games. In the image cuts used in functional coloring games, we will find ways to utilize differentiated Hallyu content image cuts and study and present the direction of development of aesthetic elements of coloring games. Research on Korean Wave content, which has made use of our own aesthetic elements, should continue, and functional games using digital mobile device devices and game content elements utilizing Korean images in the Korean game industry will help spread Korean pop culture and digital Hallyu.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.4
• /
• pp.827-839
• /
• 2012

A cell phone is very close to the user and therefore should be considered in digital forensic investigation. Recently, the proportion of smartphone owners is increasing dramatically. Unlike the feature phone, users can utilize various mobile application in smartphone because it has high-performance operating system (e.g., Android, iOS). As acquisition and analysis of user data in smartphone are more important in digital forensic purposes, smartphone forensics has been studied actively. There are two way to do smartphone forensics. The first way is to extract user's data using the backup and debugging function of smartphones. The second way is to get root permission, and acquire the image of flash memory. And then, it is possible to reconstruct the filesystem, such as YAFFS, EXT, RFS, HFS+ and analyze it. However, this methods are not suitable to recovery and analyze deleted data from smartphones. This paper introduces analysis techniques for fragmented flash memory pages in smartphones. Especially, this paper demonstrates analysis techniques on the image that reconstruction of filesystem is impossible because the spare area of flash memory pages does not exist and the pages in unallocated area of filesystem.

• Journal of Internet Computing and Services
• /
• v.23 no.5
• /
• pp.69-78
• /
• 2022

As the use of Internet of Things (IoT) devices has expanded, digital forensics coverage of the National Police Agency has expanded to smart home areas. Accordingly, most of the existing studies conducted to acquire smart home platform data were mainly conducted to analyze local data of mobile devices and analyze network perspectives. However, meaningful data for evidence analysis is mainly stored on cloud storage on smart home platforms. Therefore, in this paper, we study how to acquire stored in the cloud in a Hey Home Air environment by extracting accessToken of user accounts through a cookie database of browsers such as Microsoft Edge, Google Chrome, Mozilia Firefox, and Opera, which are recorded on a PC when users use the Hey Home app-based "Hey Home Square" service. In this paper, the it was configured with smart temperature and humidity sensors, smart door sensors, and smart motion sensors, and artifacts such as temperature and humidity data by date and place, device list used, and motion detection records were collected. Information such as temperature and humidity at the time of the incident can be seen from the results of the artifact analysis and can be used in the forensic investigation process. In addition, the cloud data acquisition method using OpenAPI proposed in this paper excludes the possibility of modulation during the data collection process and uses the API method, so it follows the principle of integrity and reproducibility, which are the principles of digital forensics.