• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.969-972
• /
• 2016

In this paper, we propose an algorithm of angular mode selection for high-performance HEVC intra prediction. HEVC intra prediction is used to remove the spatial redundancy. Intra prediction has a total of 35 modes and block size of $64{\times}64$ to $4{\times}4$. Intra prediction has a high amount of calculation and operational time due to performing all 35 modes for each block size for the best cost. The angular mode algorithm proposed has a simple difference between pixels of the original image and the selected angular mode. A decision is made to select one angular mode plus planar mode and DC mode to perform the intra prediction and determine the mode with the best cost. In effect, only three modes are executed compared to the traditional 35 modes. Performance evaluation index used are BD-PSNR and BD-Bitrate. For the proposed algorithm, BD-PSNR results averagely increased by 0.035 and BD-Bitrate decreased by 0.623 relative to the HM-16.9 intra prediction. In addition, the encoding time is decreased by about 6.905%.

• Korean Journal of Optics and Photonics
• /
• v.26 no.6
• /
• pp.312-317
• /
• 2015

We investigate the effect of laser-resonator mode size on the output of a Yb:YAG laser that is mode-locked by a semiconductor saturable absorber mirror (SESAM). We demonstrate that the smaller the product of the mode sizes at a SESAM and at a Yb:YAG crystal, the more stable the mode-locked output is. Also, we found numerically that there is a resonator length at which the mode-locked output occurs, regardless of the thermal lens effect of a Yb:YAG.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.767-773
• /
• 2017

In this paper, we propose a design of Intra prediction angular mode decision for HEVC encoder. Intra prediction coding of HEVC is a method for predicting a current block by referring to samples reconstructed around a current block. Intra prediction supports a total of 35 modes with 1 DC mode, 1 Planar mode, and 33 Angular modes. Intra prediction coding of HEVC works by performing all 35 modes for efficient encoding. However, in order to process all of the 35 modes, the computational complexity and operational time required are high. Therefore, this paper proposes comparing the difference in the value of the original pixel, using an algorithm that determines angular mode efficiently. This new algorithm reduces the Hardware size. The hardware which is proposed was designed using Verilog HDL and was implemented in 65nm technology. Its gate count is 14.9K and operating speed is 2GHz.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.325-331
• /
• 2013

In this study, a complex eigenvalue analysis is implemented to verify the unstable mode of a brake system using ABAQUS software. The component participation factors and component modal participation factors are used to analyze the total contributions from each component and each component mode to a particular unstable system mode. This study shows that the 1.4-kHz unstable system mode comes from mode coupling between the 2nd nodal diametric mode and 3rd lateral axial mode (LAM) in the baseline model. A sensitivity analysis with a linking index is performed to prevent the mode coupling of the component modes. This linking index analysis shows the optimum mass loading position to move away the natural frequency of the 3rd LAM, which contributes to the unstable mode. Finally, a complex eigenvalue analysis is implemented with mass loading in the tie bar position, and no unstable system mode is generated in the low-frequency range (below 2 kHz).

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.4
• /
• pp.569-574
• /
• 2007

최근 많은 광대역 유무선 통신 응용분야에서 OFDM(Orthogonal Frequency Division Multiplexing) 방식을 표준기술로 채택하고 있다. OFDM 방식의 고속 무선 데이터 통신을 위한 FFT 프로세서는 일반적으로 DSP(Digital Signal Processing)로 구현되었으나, 큰 전력 소비를 필요로 한다. 따라서, OFDM 통신방식의 단점인 전력문제를 보완하기 위해서 전류모드 FFT LSI가 제안되었고, 저소비전력 전류모드 FFT LSI를 동작시키기 위해서는 전류모드를 전압모드로 바꾸는 VIC(Voltage to Current Converter) 그리고 다시 전류모드를 전압모드로 바꾸어 주는 IVC(Current to Voltage Converter)가 필요하다. 그러나, OP-AMP로 구현되는 종래의 IVC는 회로규모가 크고, 전력소비가 크며, LSI 내에 크고 정확한 높은 저항을 필요로 한다. 또한 전류모드신호처리에서 많이 이용되는 Current Mirror 회로 등의 출력단자로부터 전류신호를 입력받은 경우, 입력단자간의 전위차가 발생하며, DC offset 전류가 발생하는 등의 문제점을 갖는다. 따라서 본 연구에서는 저전력 동작이 가능하고, 향후, single chip 응용이 가능한 IVC를 $0.35{\mu}m$ 공정에서 설계함으로서, $0.35{\mu}m$ 공정에서의 전류모드 FFT LSI의 전압모드 출력이 가능해졌다 설계된 IVC는 FFT LSI의 출력이 디지털신호로 환산한 ${\pm}1$인 점을 감안하여, 전류모드 FFT LSI의 출력이 $13.65{\mu}A$ 이상일 때에 3.0V의 전압을 출력하고, FFT LSI의 출력이 $0.15{\mu}A$ 이하일 때에 0.5V 이하의 전압을 출력하도록 하였으며, IVC의 총 소비전력은 약 1.65mV이하로 평가되었다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.261-265
• /
• 2002

In the machining tool avoid vibration problem have an effect on high precision as well as statical and thermal characteristics. Therefore overcome this problem is essential to advance of machine tool and machining skill. Even though vibration arises owing to a variety of causes, in this paper vibration analysis of column as a major part of machine tool structures is presented. At this procedure vibration analysis applied to mode synthesis method using a attachment mode .

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.202-205
• /
• 2010

H.264/AVC의 화면내 예측 부호화 기술에서 예측 모드 정보를 부호화하기 위해 최우선 모드를 이용하며 최우선 모드의 선택율은 매우 높다. 또한 일반적으로 자연 영상이나 동영상의 경우 균일한 특성을 나타내는 영역을 많이 포함하고 있으며, 이러한 영역은 주변 블록과의 상관도가 매우 높다. 따라서 주변 블록의 예측 모드, 화소 에지의 방향성을 이용하면 복호화기에서도 현재 블록의 최적의 예측 모드를 결정할 수 있다. 본 논문에서는 화면내 부호화 효율을 향상시키기 위해 예측 모드 정보를 전혀 전송하지 않는 복호화기 예측을 이용한 화면내 예측 모드 SKIP 부호화 모드를 제안한다. 제안하는 방법은 주변 블록의 정보만을 이용하여 예측 모드를 결정하고 기존의 예측/변환 방법을 이용하여 부호화를 실시하며 예측 모드 정보는 전혀 전송하지 않는다. 실험 결과 제안하는 방법은 H.264/AVC의 참조 소프트웨어인 JM 17.0에 비하여 CIF 영상에서 1.40%, 720p 영상에서는 3.24%의 비트 감소를 나타내었다.

• Journal of Advanced Navigation Technology
• /
• v.17 no.2
• /
• pp.196-201
• /
• 2013

In this paper, a dual-mode balanced filter with symmetric coupled composite right/left-handed transmission line is introduced. Unlike the other symmetric structure, this configuration has the ability to operate under both common- and differential-mode excitation. These properties are achievable through providing physical short circuit by means of ground vias at the center of each unit-cell along the symmetry plane of the structure. Because the CRLH unit-cells are operated under both common- and differential-mode excitation, we implemented a balanced filter using these properties. To validity these features, a five-cell four port coupled CRLH-TL is simulated, fabricated and measured and the obtained performances agree with the simulation results under both common- and differential-mode excitation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.5
• /
• pp.317-322
• /
• 2014

Data security and integrity is a critical issue in data transmission over wired/wireless links. A large amount of data is encrypted before transmission, by block cipher using mode of operation. RBF mode is a block cipher mode of operation which uses random characteristics. In this paper, we analyze the safety against known plaintext attack and chosen plaintext attack of RBF mode compared to the traditional modes. According to the analysis, RBF mode is known to be secure while the traditional modes are not secure against them.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.1
• /
• pp.54-60
• /
• 2000

There are many works to analyze a simple expansion chamber involving higher order modes. These works are classified to mode matching method, velocity potential method and finite element method. Among these methods, mode matching method has good performance at analyzing a concentric expansion chamber. Generally inlet/outlet pipe cross section area is smaller than middle chamber cross section area. So the number of higher order modes of inlet/outlet pipe can be fewer than that of middle chamber. But mode matching method must use the same number of higher order modes at inlet pipe, middle chamber and outlet pipe. Therefore the redundant modes of inlet/outlet pipe makes the computation time of mode matching method longer. In this paper, the new method, which can select number of each higher order modes of inlet pipe, middle chamber and outlet pipe, was suggested. And this method was compared to conventional mode matching method and finite element method in order to demonstrate the accuracy of the new method and to show that the new method can reduce a calculating time.