• Journal of Korea Multimedia Society
• /
• v.11 no.10
• /
• pp.1392-1402
• /
• 2008

Home gateway is always full-powered for ubiquitous home services, and consumes much energy yearly. Power-saving algorithm to conserve this energy must reduce the energy consumption and preserve always-on services. Our algorithm predicts current idle period using the history of the past idle period when the idle period starts, and then determines whether the power mode is changed to the saving mode or not. On the power saving mode, it processes the simple protocol data for network control using proxying with no wakeup. And it changes the power mode to active mode when user's traffic exists. As the results of the simulation using real traffic, our algorithm saves the energy consumption from 14% to 49% as compared with existing method.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.467-477
• /
• 1997

A series of experimental tests have been performed on a tube beam in which artificial damage is applied in order to address damage detectability using modal analysis. Modal parameters considered are frequency, displacement mode shape and strain mode shape CoMAC(Coordinate Modal Assurance Criterion) and Modal Vector Error have been adopted for presenting the change of displacement mode shape and strain mode shape. It is revealed strain mode shape is the most sensitive to damage.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1175-1182
• /
• 2013

The lock-in mode infrared thermography (IRT) technique has been developed to improve the detection capability of defects in materials with high thermal conductivity, and it has been shown to provide better detection capability than conventional active IRT. Therefore, to investigate the application of this technique to nuclear piping components, lock-in mode IRT tests were conducted on pipe specimens containing simulated wall-thinning defects. Phase images of the wall-thinning defects were obtained from the tests, and they were compared with thermal images obtained from conventional active IRT tests. It showed that the ability to size the detected wall-thinning defects in piping components was improved by using lock-in mode IRT. The improvement was especially apparent when detecting short and narrow defects and defects with slanted edges. However, the detection capability for shallow wall-thinning defects did not improve much when using lock-in mode IRT.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.7-12
• /
• 2007

Swirl injector with multi-stage tangential entry was analyzed to suppress high-frequency combustion instability in Liquid Rocket Engines. In order to analyze the effect of swirl injector as an acoustic absorber, swirl injector was regarded as a quarter-wave resonator and it's damping capacity is verified in atmospheric temperature. It has a finite mode of vibration and natural frequencies which can be tuned to the natural frequencies of a model combustion chamber. When the targeted injector for each modes is located at anti-node point, the amplitude of modes was decreased. And when the injector of large diameter is mounted, the split of mode which accompanies the decrease of amplitude appeared. From the experimental data, it is proved that if the location of injector mounted is located at an anti-node position of the targeted modes with proper volume, the amplitude of modes is decreased and the split of modes occurs at anti-node point.

• Korean Journal of Optics and Photonics
• /
• v.32 no.2
• /
• pp.62-67
• /
• 2021

We have experimentally demonstrated sum-frequency generation (SFG) in a periodically poled lithium niobate (PPLN) crystal, using a mode-locked picosecond-pulsed fiber laser and a continuous-wave (CW) diode laser with a narrow linewidth. The mode-locked fiber laser had a center wavelength of 1560.7 nm and a spectral width of 1.1 nm, and the CW diode laser had a center wavelength of 1551.0 nm and a spectral width of 6 MHz. To effectively realize SFG, both of the spatial modes of the two lasers were made to overlap in the PPLN crystal by using a single-mode optical fiber. The pulse-mode SFG with pulsed- and CW-mode lasers was successfully observed in the spectral and time domains. These results are expected to be applicable in various ways, such as optical frequency measurement and high-resolution laser spectroscopy studies using optical frequency combs.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.154-155
• /
• 2003

반도체 소자에 있어서 굴절율의 변화는 중요한 역할을 한다. 굴절율을 변화시키는 다양한 요소들은, 전계에 의한 1차 전기광학(linear electro-optic： LEO) 효과와 2차 전기광학 (quadratic electro-optic： QEO) 효과, 자유 운반자에 의한 밴드천이(band-gap shift： BS) 효과와 플라즈마(plasma： PL) 효과 등으로 잘 알려져 있다. 본 논문에서는, 오로지 TE 모드에 대해서만 선택적으로 위상 변화를 주는 P-I-i-I-N GaAs／Al／sub0.35／Ga／sub 0.65／As 도파로 위상변조기를 보고한다. (중략)

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.847-854
• /
• 1999

In this paper, we have analysed frequency-dispersion characteristics of higher-order modes for uniform planar transmission lines, using the 2-dimensional finite-difference time-domain method. The method presented in this paper uses both informations of amplitude and phase of the electromagnetic spectrum to determine resonant frequencies, while methods previously reported use the magnitude only. This algorithm is very useful when a resonant mode has a relatively small magnitude, where the identification of the resonant mode is quite difficult. Numerical results show that a strip line supports few higher-order modes within the frequency range of 20 GHz, but there occur many higher-order modes in the structure of grounded coplanar waveguide, where resonant frequencies of the first higher-order mode is very close to those of the fundamental mode and there occur lots of very adjacent higher-order modes. As in this example, for the analysis of planar transmission lines which support many resonant modes very close each other, the method presented in this paper can be applied very efficiently.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.8-14
• /
• 2016

화학 결합을 이해하는 중요한 방법 중 하나는 결합이 가지는 고유한 진동 모드를 분석하는 것이다. 진동 모드의 변화를 관측함으로써 다양한 외부 자극과 분자의 상호작용에 대한 연구도 가능하다. 본 연구에서는 전기장이 가해진 물 분자의 진동 모드 변화를 분석함으로써 전기장과 물분자의 상호작용이 화학 결합에 미치는 영향을 알아보았다. 물 분자의 특정 O-H 결합 방향으로 전기장을 걸어주었을 때 신축 진동수의 변화를 살펴봄으로써 결합의 변화를 분석했다. 전기장에 따른 결합의 진동수 변화를 vibrational Stark effect (VSE)라 하고 그 정도를 Stark tuning rate ${\Delta}{\mu}$ ($={\Delta}v/{\Delta}E$, ${\Delta}v$ :진동수의 변화, ${\Delta}E$: 전기장의 변화)로 정의한다. 이때 Stark tuning rate에 영향을 미치는 요소는 전기장에 의한 (1) 분자 구조 변화(geometric effect)와 (2) 전자 구조의 분극현상(polarization effect)으로 나누어 생각해 볼 수 있다. 본 연구에서 물 단일체, 이중체, 사중체의 O-H 결합에 대해 살펴본 결과, VSE 효과에 주로 영향을 미치는 것은 전기장에 의한 구조 변화인 것으로 나타났다. 이를 통해 전기장이 주는 전자 구조 분극 효과는 크지 않지만 이를 통해 유발되는 구조 변화에 의해 진동수 (또는 화학 결합의 세기)가 크게 변한다는 것을 알 수 있다. 그렇기 때문에 수소 결합 안정화로 인해 구조 변화가 쉬운 물 이중체, 사중체에서 VSE 효과가 크게 나타났다. 추가적으로 물 클러스터에서 형성되는 내부 전기장과 O-H 결합의 포텐셜 비조화성(anharmonicity)이 VSE에 주는 영향에 대한 연구도 수행하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.6
• /
• pp.492-503
• /
• 2013

H.264/AVC has shown high coding efficiency by using various coding tools, including intra and inter prediction. However, there are still many more redundancy components in intra prediction than in inter prediction. In this paper, a novel intra prediction method is proposed with adaptive mode selection. The combined intra prediction modes and simplified gradient modes are added in order to refine the directional feature and gradation region. Suitable modes are selected according to the neighboring blocks that provide a high compression rate and lower computational complexity. The improvement of the proposed method is 1.96% in terms of the bitrate, 0.25 dB in PSNR, and 1.72 times in terms of the computational complexity.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.32-39
• /
• 2001

We analyze the effectiveness of the PMD compensation as a function of the link PDL, to acquire the guidelines for the successful deployment of PMDC. Result shows that the amount of BER improvement from the PMDC is decreased as the link PDL increases. Because PDL elements in the transmission system make well-defined two PSPs under the absence of PDL not orthogonal anymore, and proper definition of fast and slow polarization harder. Accordingly, consideration of PDL's potential effects must be needed for design of polarization mode dispersion compensation.sation.