• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.3
• /
• pp.430-442
• /
• 1992

본 연구에서는 자동차의 여러 모드 사이에 존재하는 연성항의 비연성을 위한 능동 제어력을 계산하여 연성항이 승차감에 미치는 영향을 살펴보고, 이 연성항을 비 연성화하기 위한 제어력을 계산하였으며, 현가장치의 반능동 제어에 적용하였다. 또 한 새로운 민감도 이론식을 제안하여 7자유도 현가계에 적용하고 시뮬레이션을 통하여 특성변화예측을 하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.11-20
• /
• 2014

This paper aims at comparing and analyzing shear buckling characteristics between sinusoidal corrugation shape and trapezoidal one. For this, I adopted the equal-length trapezoidal corrugation and sinusoidal one for the analytical models, and analyzed their shear buckling characteristics through linear buckling analysis and on its theory. Generally, the shear buckling shapes of corrugated steel plates are classified into local buckling, global buckling, and interactive buckling from the two buckling modes. Sinusoidal corrugation shape, unlike trapezoidal corrugation, does not have flat sides, which causes another tendency in shear buckling mode. Especially, the changes and different aspects of shear buckling on the boundary between local buckling and global buckling appear in different corrugation shapes. According to the analysis results, interactive buckling mode appeared on the boundary of local buckling and global bucking in trapezoidal corrugation. However, in the case of corrugated steel plates with sinusoidal configuration, interactive buckling mode appeared in the part where global bucking takes place. Besides, trapezoidal shapes are of advantages on shear buckling resistance in the local buckling section, and so are sinusoidal shapes in the global buckling section.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.4
• /
• pp.243-252
• /
• 2016

In this paper, the incoherent reverberation model based on coupled normal mode method is presented. In the range dependent environment, one way coupled normal mode method is used to calculate the pressure from a source to a scatterer patch and the pressure from a scatterer patch to a receiver. For the computational efficiency, the sound propagation from a source/receiver to the scatterer patch is assumed to occur only in the 2D plane where a source/receiver and scatterer patch are located. For the model verification, problems of the reverberation modeling workshop I and II sponsored by the US office of Naval Research are calculated and the results are compared with the incoherent reverberation model results based on the ray method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.300-305
• /
• 1994

차실 음향 공동의 특성을 유한요소법에 의해 해석하고자 할 때, 과거에는 차실 음향공동과 트렁크 음향공동과의 상호연성을 고려하지 않고, 두 공동의 경계면을 강체 경계조건으로 생각하여 해석 대상 모델을 차실 음향 공동만으로 국한시켰다. 이러한 해석 방법을 통해서는, 차실과 트렁크 공동이 완전히 밀폐되어 있지 않고 단지 뒷좌석에 의해 두 공동이 구별되어지는 차종에 대해서는 실험과 근접하는 유한요소해석 결과를 얻을 수 없다. 그러므로 차실 공동과 트렁크 공동의 경계면을 가상의 탄성벽 경계조건으로 생각하여 그 탄성벽을 통한 두 공동의 상호 연성을 고려하는 유한요소 모델을 구현하여야 한다. 실제로 트렁크가 차실에 미치는 연성효과를 고려하여 유한요소해석을 수행할 경우 차실의 고유진동수와 고유모드에 미치는 영향이 상당히 큰 것을 확인할 수 있었다. 이하 본 내용에서는 차실과 트렁크 공동, 그 사이의 탄성벽을 이론적으로 해석 가능한 1차원으로 모델링하여 실험 결과와 근접하는 3차원 유한요소 모델링 기법을 제시한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.191-196
• /
• 1995

지지부에 비틀림 하중을 받는 Elstica는 비틀림 운동을 하며, 그 가진 주파수가 굽힘모드 근처일 때는 해당하는 굽힘 모드의 운동까지도 동시에 존재하게 된다. 이때 가진력의 크기가 작을때는 주기적인 운동이 된다. 가진력의 크기가 증가함에 따라 굽힘 운동은 굽힘 1차 모드와 연성된 유사주기운동이 발생하며, 이떤 범위 이상이 되면 굽힘 운동과 비틀림 운동이 결합된 진폭이 매우 크고 불규칙적인 비평면 운동(out of plane motion)이 발생하게 되며 이 때의 운동은 혼돈운동이다. Elastica가 굽힘 3차 고유진동수 근방의 주파수로 비틀림 하중을 받을 때의 정확한 이론적 해석을 위해서는 굽힘 3차모드 까지는 반영할 수 있는 식이 모델링 되어야 할 것으로 보인다. 이것은 복잡한 비평면운동을 할 때 굽힘 3차 모드까지 관찰된다는 사실에 근거한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.2
• /
• pp.289-295
• /
• 2001

The aim of this study is to investigate the ductile fracture behaviour under pure Mode II loading using A533B pressure vessel steel. Single punch shear(SPS) test was performed to obtain the J-R curve under pure Mode II loading which was compared with that of the Model I loading. Simulation using Rousellier Ductile Damage Theory(RDDT) was carried out with 4-node quadrilateral element(L(sub)c=0.25mm). For the crack advance, the failed element removal technique was adopted with a $\beta$ criterion. Through the $\beta$ value tuning-up procedures, $\beta$(sub)crit(sup)II was determined as 1.5 in contrast with $\beta$(sub)crit(sup)I=5.5. In conclusion, it was found that the J-R curve under Mode II loading was located at lower part than that under Mode I loading obtained from the previous study and that the $\beta$ values strongly depended on the loading type. In addition, the predicted result using RDDT showed a good agreement with the SPS experimental one under pure Mode II loading.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2302-2312
• /
• 2000

An active control of the transmission of noise through an aircraft fuselage is investigated numerically. A cylinder-cavity system was used as a model for this study. The fuselage is modeled as a fi nite, thin shel cylinder with constant thickness. The sound field generated by an exterior monopole source is transmitted into the cavity through the cylinder. Point force actuators on the cylinder are driven by error sensor that is placed in 3D cavity. Modal coupling theory is used to formulate the numerical models and describe the system behavior. Minimization of the acoustic potential energy in the fuselage is carried out as a performance index. Continuous parameter genetic algorithm is used to search the optimal actuator position and both results are compared.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.2
• /
• pp.84-92
• /
• 1995

To understand how low-frequency sound waves propagate axially in drilling boreholes, the propagation modes and speeds including the effect of interaction among layers are obtained by analyzing an infinitely-long, uniform, and cylindrically multi-layered waveguide which is consisted of fluid layers and solid layers. Assuming low frequency(wave length considered is very long compared to the borehole diameter), axisymmetry, non-viscosity, and etc., analytical solutions are obtained. Also, sound reflection due to the changes in the cross section is analyzed. Results for typical drilling boreholes show the usefulness of the method developed in this research, and are compared with FEM results showing good agreements.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.10-19
• /
• 2014

Corrugated steel plates are made by fabricating thin steel plates to have trapezoidal or sinusoidal corrugation, and the corrugated plates are able to maintain high out-of-plane rigidity even when they are used instead of thick flat plates. Also, corrugated steel plates have almost no axial rigidity due to the accordion effect. Thus, if they are applied to the webs of plate girders, designing can be easily conducted so that the webs bear only shear stresses. However, unlike flat plates, the shear buckling of corrugated steel plates has very complex characteristics where buckling occurs due to the interaction of local and global buckling, besides local buckling and global buckling. For the investigation of the cause and characteristics of this interactive buckling, studies on sinusoidal corrugated steel plates are fewer than studies on trapezoidal corrugated steel plates. Therefore, in this study, the shear buckling characteristics of sinusoidal corrugated steel plates and the occurrence pattern of interactive buckling were investigated. For the calculation of shear buckling strength, a finite element program was used, and the analysis results were compared with the exact solution. In addition, the characteristics of buckling stress change and the change of buckling mode shape depending on corrugation thickness and shape parameter were analyzed, and by comparing these results with the results of a theoretical equation, the timing of buckling mode change was analyzed.