Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Ductile Fracture Behaviour of SPS Specimen Under Pure Mode II Loading

순수 모드 II하중 하에서의 SPS 시험편의 연성파괴 특성에 관한 연구

  • Published : 2001.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

The aim of this study is to investigate the ductile fracture behaviour under pure Mode II loading using A533B pressure vessel steel. Single punch shear(SPS) test was performed to obtain the J-R curve under pure Mode II loading which was compared with that of the Model I loading. Simulation using Rousellier Ductile Damage Theory(RDDT) was carried out with 4-node quadrilateral element(L(sub)c=0.25mm). For the crack advance, the failed element removal technique was adopted with a $\beta$ criterion. Through the $\beta$ value tuning-up procedures, $\beta$(sub)crit(sup)II was determined as 1.5 in contrast with $\beta$(sub)crit(sup)I=5.5. In conclusion, it was found that the J-R curve under Mode II loading was located at lower part than that under Mode I loading obtained from the previous study and that the $\beta$ values strongly depended on the loading type. In addition, the predicted result using RDDT showed a good agreement with the SPS experimental one under pure Mode II loading.

Keywords

References

  1. Miles, L. and Gladwin, D. N., 1991, 'Evaluation of Mode Ⅱ Fracture Toughness Using Single Punch Specimens,' Nuclear Electric Memo TD/SIP/MEN/1216/91
  2. Oh, D. J., Howard, I. C. and Yates, J. R., 2000 'Ductile Fracture Behaviour under Mode I Loading Using Rousselier Ductile Damage Theory,' KSME International Journal, Vol. 14, No. 9, pp. 978-984
  3. Rousselier, G., 1981, 'Finite Deformation Constitutive Relations Including Ductile Fracture Damage,' in Three-Dimensional Constitutive Relations and Ductile Fracture, S. Nemat-Nasser ed., North-Holland Publishing, Holland, pp. 331-355
  4. Rousselier, G., 1987, 'Ductile Fracture Models and Their Potential in Local Approach of Fracture,' Nuclear Engineering and Design, Vol. 105, pp. 97-111
  5. Bilby, B. A., Howard, I. C. and Li, Z. H., 1993, 'Prediction of the First spinning Cylinder Test Using Ductile Damage Theory,' Fatigue and Fracture of Engineering Materials and Structures, Vol. 16, pp. 1-20
  6. Sumpter, J. D. G. and Turner, C. E., 1976, 'Method for Laboratory Determination of $J_c$,' in Crack and Fracture, ASTM STP 601, pp. 3-18
  7. Landes, J. D.;Begley, J. A., 1972, 'The J Integral Estimation Techniques to Determine Critical Fracture Toughness in Ductile Steels,' ASTM STP 514, pp. 1-20
  8. Franklin, A.G., 1969, 'Comparison between a Quantitative Microscope and Chemical Methods for Assessment of Non-metallic Inclusions,' Journal of Iron and Steel Institutes, pp. 181-186
  9. Oh, D. J., 1998, 'Ductile Fracture Behavior under Mixed Mode (Ⅰ/Ⅱ) Loading,' Ph. D. Thesis. University of Sheffield, UK
  10. Howard, I. C., Othman, A. M., Librury, D. R. G. and Sherry, A. H., 1995, 'Simulation of the Behaviour of Two Large Scale Tests Using Ductile Damage Mechanics Models Derived from Small Scale Laboratory Data,' Proceedings. of IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials, Sevres, France, eds. Pineau, A. and Zaouki, A., Kluwer Academic Pub. pp. 199-206
  11. Davenport, J. C. W., 1993, Mixed Mode Elastic-Plastic Fracture, Ph.D. Thesis, University of Bristol, UK
  12. Suresh, S. and Tschegg, E. K., 1987, 'Combined Mode I-Mode Ⅲ Fracture of Fatigue-Precracked Alumina,' Journal of American. Ceramic Society, Vol. 70, pp. 726-733
  13. Singh, D. and Shetty, D. K., 1989, 'Fracture Toughness of Polycrystalline Ceramics in Combines Mode I and Mode II Loading,' Journal of American. Ceramic Society, Vol. 72,pp. 78-84 https://doi.org/10.1111/j.1151-2916.1989.tb05957.x
  14. Banks-Sills, L. and Bortman, Y., 1986, 'A Mixed- Mode Fracture Sprcimen: Analysis and Testing,' International Journal of Fracture, Vol. 30, pp. 181-201 https://doi.org/10.1007/BF00019776
  15. Howarl, I. C., Li, Z. H. and Bilby, B. A., 1994, 'uctile Crack Growth Predictions for Large Centre Cracked Panel by Damage Modeling Using 3-D Finite Element Analysis,' Fatigue and Facture Engineering Materials and Structures, Vol. 17 pp. 959-969
  16. Howarl, I. C., Li, Z. H. and Bilby, B. A., 1994, 'Ductile Fracture Prediction of Large Centre- Cracked Panels by Damage Theory Using 3-d Finite Element Calculations,' Fatigue and Facture Engineering Materials and Structures, Vol. 17, pp. 1075-1087 https://doi.org/10.1111/j.1460-2695.1994.tb00836.x
  17. Li, Z. H., Bilby, B. A. and Howard, I. C., 1994, 'A Study of the Internal Parameters of Ductile Damage Theory,' Fatigue and Facture Engineering Materials and Structures, Vol. 17 p. 1075-1087 https://doi.org/10.1111/j.1460-2695.1994.tb00836.x