• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.74-84
• /
• 2016

After Sep. 2017, the LEV3 emission standard will be applied to gasoline and gas vehicles in Korea. This standard has HWFET and SFTP standard as well as FTP-75. Most of LPG vehicles were certificated as SULEV in Korea. Until now, only FTP-75 standard is applying for the certification but it is expected that HWFET and SFTP are used after beginning LEV3. In this paper, 8 LPG and 4 gasoline vehicles were tested on FTP-75 and SFTP to check whether the LPG vehicles can meet LEV3 SFTP standard or not and to suggest direction of development. Most of test vehicles did not meet the SFTP standard. To make up for the fault, fuel injection control improvement is needed.

• Journal of Korea Water Resources Association
• /
• v.49 no.3
• /
• pp.197-205
• /
• 2016

Recently, natural hazards have occurred frequently due to climate change. The research need for predicting variability and tendency of precipitation and temperature has been increased. However, it is difficult to determine the characteristics of precipitation and temperature within a confidence range since they change due to complex factors with choppy and too many components. If their characteristics having more than one component are decomposed, then it can be useful for determining the variation of such characteristics more accurately. In this study, Korean precipitation and temperature were decomposed and their Intrinsic Mode Function (IMF) were extracted from Empirical Mode Decomposition (EMD). Finally, the characteristics of Korean precipitation and temperature data were analyzed in terms of periodicity and tendency.

• Korean Journal of Optics and Photonics
• /
• v.22 no.2
• /
• pp.108-113
• /
• 2011

In this paper, we propose the complex differential diagram to classify surface plasmon waveguide modes with single interface. To date, surface plasmon waveguide modes are classified using the sign change of the group velocity in the dispersion relation that describes the interrelations between the real wavenumber of the propagation direction and the photon energy. The surface plasmon waveguide modes have the wavenumbers of the direction perpendicular to that in which the wave propagates as well as of the propagation direction, so it is necessary to classify the modes using all of these wavenumbers. The complex differential diagram is a graphical representation with variables of the difference between the real component and the imaginary component of the wavenumber. Using this diagram, the specific mode classification is possible, and it is easy to comprehensively analyze the wavenumber as the function of the photon energy.

• Korean Journal of Optics and Photonics
• /
• v.33 no.6
• /
• pp.252-259
• /
• 2022

We have conducted a study to control the light-intensity distribution at the output end of a multimode optical fiber via estimating the transmission matrix. A circularly arranged Hadamard eigenmode phase distribution was implemented using a spatial light modulator, and the transmission matrix of a multimode optical fiber was experimentally obtained using a four-phase method. Based on the derived transmission matrix, the spatial phase distribution of light incident upon the optical fiber was adjusted via the spatial light modulator in advance, to focus the light at a desired position at the optical fiber output. The light could be focused with an intensity up to 359.6 times as high as that of the surrounding background signal at a specific position of the multimode fiber's output end, and the intensity of the focused beam was on average 104.6 times as large as that of the background signal, across the area of the multimode fiber's core.

• The Journal of Society for e-Business Studies
• /
• v.15 no.4
• /
• pp.49-58
• /
• 2010

The wireless sensor network technology becomes one of core technologies to make it possible to implement various e-business applications. Energy efficiency is an important issue in wireless sensor networks. IEEE 802.15.4, a representative international standard for wireless sensor networks, provides the beacon enabled mode for energy-efficient communication. However, the beacons may conflict each other when the network is of multi-hop topology such as mesh or cluster-tree topology with beacon-enabled mode. The beacon conflict causes the failure of synchronization between sensor nodes, and affects other nodes in the network in that unsynchronized nodes cannot participate in communication. In this paper, we suggest an energy-efficient beacon scheduling for the wireless sensor networks. Nodes can save their energy duringperiod and prevent beacon conflict using beacon scheduling. We implement the scheduling using QualNet, and evaluate the performance under mesh topology networks. It turns out that the proposed scheduling may improve the energy efficiency in the networks.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.3
• /
• pp.389-398
• /
• 2002

The mixed mode problem (I and II) of a peny-shaped interface cracks in remote tension loading on a bi-material cylinder is studied using finite element method. The energy release rates for the tip of the crack in the interface were calibrated for several different moduli combinations and crack ratios using the modified crack closure integral technique and J-integral method, with numerical results obtained from a commercial finite element program. Numerical results show that non-dimensional value of$\sqrt{G_{II}E^*}/\sqrt[p]{\pi a}$ increases as the crack size or moduli ratio increases. Meanwhile, non-dimensional value of$\sqrt{G_{I}E^*}/\sqrt[p]{\pi a}$ decreases as the moduli ratio increases, but above the moduli ratio of 3 its value decreases then increases again as the crack size increases. Reliability of the numerical analysis in this study was acquired with comparison to an analytical solution for the peny-shaped interface crack in an infinite medium.

• Proceedings of the Korea Contents Association Conference
• /
• 2017.05a
• /
• pp.45-46
• /
• 2017

본 논문에서는 간섭신호가 존재하는 무선 에너지 중계 네트워크 환경에서 중계 노드의 에너지 수확률을 결정하는 TSR 기반 에너지 하베스팅 기법의 성능을 향상시키기 위하여 간섭을 고려한 전송채널 분석 모델과 에너지 하베스팅 최적화 기법을 제안한다. 특히, 간섭 신호를 고려한 최적의 수신기 모드 스위칭 메커니즘 설계를 위한 최적의 에너지 수확률(energy harvesting ratio) 결정 기법을 제안하여 RF 에너지 하베시팅 시스템의 처리율을 최대화 할 수 있도록 하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.07a
• /
• pp.67-70
• /
• 1991

종펌핑 Littman 공진기에서 선폭 500 MHz 이하의 단일 종모드 색소레이저를 발진켰으며, 에탈론 간섭무늬를 이용하여 단일종모드 색소레이저의 주파수를 안정화시켰다. 아울러 이들 레이저의 여러 특성을 조사하였으며, 최대효율은 2%, 문턱에너지는 130uJ이었다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.125-127
• /
• 2011

구조물의 동적특성인 모드형상을 통해 국부적인 손상을 탐지하는 손상평가 기법은 많은 연구자에 의해 발전되고 있다. 하지만 플로팅 구조물에 대한 손상탐지 기법은 그 사례를 찾아보기 힘들다. 본 논문에서는 플로팅 구조물의 축소모형을 제작하고, 손상을 모사하여 손상전과 손상 후 구조물의 모드형상에서 얻을 수 있는 모달 변위로 나타낸 손상지수를 통해 플로팅 구조물의 손상을 탐지 하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.162-163
• /
• 2003

광 집적회로를 설계하는데 있어서 Y-형 분배기는 광에너지를 분배 혹은 결합시키는 중요한 역할을 한다. 그러나 이 소자는 분기 부분에서의 큰 손실과 공정상에서의 두 분기사이를 식각하는 것은 쉽지 않다는 단점을 갖고 있다. Y-형 분배기와 더불어 광신호의 분리와 결합에 있어서 널리 사용되는 MMI 분배기 소자는효율적인 분배 기능을 유도하기 위해서 MMI 내에 모드수가 많아져야 하는데, 이런 방식의 모드 수의 증가를 유도하기에는 MMI-길이와 폭에 제한을 받게 된다. (중략)