• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.556-561
• /
• 2001

In order to investigate the vibration characteristics of fluid-structure interaction problem, we modeled two rectangular identical plates coupled with bounded fluid. The fixed boundary condition along the plate edges and an ideal fluid were assumed. An experimental modal analysis in order to extract the modal parameters of the system was performed. Finite element analysis was performed using ANSYS to verify modal parameters and analytic results were compared with experimental results. As a result, comparison of experiment and FEM showed good agreement and the transverse vibration modes, in-phase and out of-phase, were observed alternately in the fluid-coupled system. The effect of distance between two rectangular plates on the fluid-coupled natural frequency was investigated.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.478-480
• /
• 2004

네트워크의 발달로 인하여 지역적으로 원거리에 위치한 다수의 사용자들이 공동 작업을 수행할 수 있는 다양한 기술들이 개발되었다. 공동작업을 지원하는 협업시스템은 HTTP 프로토콜을 사용하거나 또는 각자의 고유한 통신 프로토콜들을 정의하여 구현하였다. 이러한 방법은 협업시스템 간의 상호 운용성이 결여되는 문제를 발생시켰다. W3C의 IETF에서는 협업지원을 위한 WebDAV 명세가 발표되었다. WebDAV는 웹상의 공동 저작활동을 지원하기 위한 표준프로콜로서, 원거리에 있는 사용자들 간에 인터넷상의 파일을 편집하고 관리할 수 있도록 해주는 HTTP의 확장이다. 이를 이용하여 협업시스템을 구성하면 협업시스템 간의 상호 운용성을 높일 수 있을 것이 다. 협업시스템의 클라이언트는 협업지원 서버의 자원들을 효율적으로 이용할 수하고 팀원들 간의 상호작용이 원활 하게 이루어 져야한다. 이러한 요구 조건을 고려하여 본 논문에서는 WebDAV 프로토콜을 이용한 협업시스템의 클라이언트를 설계하였다. 고급기능으로 사용자가 협업지원 서버의 파일을 편집할 때 자동으로 저작프로그램을 연결하고 저작프로그램을 종료할 때 파일의 변화된 내용과 파일의 버전관리를 실시간으로 서버에 적용될 수 있게 디자인하였다. 또한 드래그앤드롭(Drag & Drop)을 통한 파일이동을 지원하고 파일의 읽기모드와 쓰기모드를 지원하는 기능을 설계하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.3
• /
• pp.241-248
• /
• 1987

The theoretical backgrounds of the several methods were surveyed and reviewed to fin out the adequate one to determine equivalent modal damping values in solving the dynamic problem of soil-structure interaction by mode superposition method. Furthermore the rigorous damping matrix of equation of motion was obtained through component mode synthesis technique and used in direct integration of the equation. The analytical results by direct integration method were compared with those of mode superposition approach using the various sets of equivalent modal damping values calculated by the methods to be reviewed. Two types of superstructures and four kinds of subsurface conditions were considered and combined to make soil-structure coupled models. It was realized that dissipating energy method gives the equivalent modal damping values which lead the most similar results to direct integration ones. In case of fixed base, the responses of all methods except stiffness weighted approach are almost equal to those of direct integration method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.7
• /
• pp.719-725
• /
• 2009

An efficient time-domain numerical method for the analysis of broadband noise generation and propagation due to turbulence-cascade interaction is developed. The core algorithm of the present method is based on the B-periodicity of the acoustic response function of the flat-airfoil cascade to the ingesting gust(B denotes the number of airfoils in the cascade). To confirm this periodicity, gust-cascade interaction problem are solved by using the time-domain method, which shows that the incident gust with the circumferential mode number having the same remainders when divided by the airfoil number excites the same acoustic response of the cascade. Using the proposed fast algorithm with this periodicity, we show that the total computation time for the model broadband problem using the total 525 incident gust modes can be reduced to about 1/4 of that taken in using the previous time-domain program.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.477-482
• /
• 2009

An efficient time-domain numerical method for the analysis of broadband noise generation and propagation due to turbulence-cascade interaction is developed. The core algorithm of the present method is based on the B-periodicity of the acoustic response function of the flat-airfoil cascade to the ingesting gust (B denotes the number of airfoils in the cascade). To confirm this periodicity, gust-cascade interaction problem are solved by using the time-domain method, which shows that the incident gust with the circumferential mode number having the same remainders when divided by the airfoil number excites the same acoustic response of the cascade. Using the proposed fast algorithm with this periodicity, we show that the total computation time for the model broadband problem using the total 525 incident gust modes can be reduced to about 1/4 of that taken in using the previous time-domain program.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.171-178
• /
• 2005

An acoustic analysis of a fuel-rich gas generator for the drive of a turbopump in a liquid rocket engine has been performed and the length of a simulating duct has been determined by comparing the resonant frequency of unstable acoustic modes to simulate an actual flight model gas generator. To simulate more realistically, a realistic short-length simulating duct has been determined by considering 1 or 2 wavelength of the unstable modes. Duct-length adjustment to turbopump can be a method to suppress a combustion instability problem by decoupling of acoustic mode and combustion characteristics. This method has been set up and validated with acoustic analysis and hot firing tests.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.3
• /
• pp.1-9
• /
• 2005

An acoustic analysis of a fuel-rich gas generator for the drive of a turbopump in a liquid rocket engine has been performed and the length of a duct has been determined by comparing the resonant frequency of unstable acoustic modes to simulate an flight model gas generator, A practical short-length simulating duct has been determined by considering 1 or 2 wavelength of the unstable modes. Length adjustment of duct to turbopump can be a method to suppress a combustion instability problem by decoupling of acoustic mode and combustion characteristics. This method has been set up and validated with acoustic analysis and hot firing tests.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.529-533
• /
• 2012

본 연구에서는 실내실험을 통하여, 하안침식을 고려한 망상하천에서 저수로의 이동특성을 조사하며, 2중 퓨리에 해석에 의하여 사주의 거동특성을 분석하였다. 실내실험은 평균입경이 1.4 mm이고, 표준편차가 1.35인 균일사로 10 cm 의 두께로 전체가 균등하게 채워진, 길이가 12 m, 넓이 2 m 수로에서 수행하였다. 각 시간별 하도의 지형변화에 대하여 2 중 Fourier 해석에 의한 지배적인 성분, 즉 모드(mode)의 변화를 분석하였다. 여기서 1-1 mode는 교호사주(alternate bars)이고, 1-2 mode와 2-2 mode는 2차 횡방향 모드로서 중앙 사주(central bars)를 나타낸다. 1-3 mode와 2-3 mode는 한 단면에서 횡방향으로 3개의 사주가 형성된 것(triple row bars)를 나타낸다. 초기에는 1-1 mode인 교호사주가 지배적이지만, 시간이 증가함에 따라, 교호사주인 1-1 mode는 감소하고, 한 단면에서 3개의 사주가 형성되는 2-3 mode가 지배적인 것으로 나타났다. 이러한 원인은 시간이 지나면서 사주가 발달하고, 하안침식이 되면서, 하폭이 증가하여 상대적으로 수심이 감소하면서 복렬사주가 발달하기 때문이며, Colombini 등(1987)이 이론적으로 예측한 결과와 잘 일치한다. 한 단면에서 3개의 모드가 나타나는 것은 하상에서 변화를 일으키는데 중요한 역할을 한다. 직선하도에서 사주의 수가 증가하는 것은 교호사주의 강한 비선형으로 상호작용하기 때문이다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.5
• /
• pp.461-466
• /
• 2015

Atomic force microscopy (AFM) is powerful tool for determining properties of samples based on interactions between the sample surface and an approaching probe tip. In this study, we modeled the interactions between the sample and the tip of the AFM microcantilever as a single nonlinear spring with an equivalent stiffness element and simulated the dynamic behaviors of the AFM microcantilevers using the finite element method (FEM) and ANSYS software. With the simulation results, we analyzed the complex dynamic responses of the AFM cantilever using proper orthogonal decomposition (POD). In addition, we compared the simulation and experimental results using the same method. Consequently, we suggest an effective method to express the interaction between the tip and sample, and we confirm that the influence of the higher order model due to the interaction between the tip and sample is increased.

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.191-197
• /
• 2006

We analyze the self-pulsation(SP) characteristics due to mode beating of two modes emitted in a multi-section complex-coupled (CC) DFB laser composed of two DFB sections and a phase control section between them. SP frequency due to mode beating of the two modes is determined by the difference of grating periods in the two CC DFB regions. As the difference of grating periods in the two CC DFB regions increases, the SP frequency increases from very low frequency to the THz region. In the case of a mode which is not located in the stop band of the other DFB region, the mode propagates into the other DFB region without a high reflection, so that output powers emitted in a multi-section CC DFB laser have high modulation indexes due to the large interaction between the two modes.