• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.419-420
• /
• 2012

동기 정류 컨버터는 다이오드에서 발생하는 도통손실을 줄이기 위해 정류 다이오드 대신 모스펫으로 대체한 것으로 고전류 응용에서 효율을 높이기 위해 주로 사용된다. 하지만 낮은 부하에서 동기 모드 보다는 DCM 으로 동작하는 것이 효율 향상에 유리하다. 일반적으로 이와 같은 모드 변환 시점을 알기 위해서는 전류의 센싱이 요구된다. 본 논문에서는 전류의 센싱없이 P&O 방식을 통해 모드 변환 시점을 확인하는 방법을 제안한다. 제안한 방법은 자세한 분석과 함께 TI사의 TMS320F28335를 통해 구현하였으며 실험을 통해 타당성 및 효용성을 검증하였다.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.454-459
• /
• 2003

We report the first demonstration of 10 Gb/s wavelength conversion in a Mach-Zehnder interferometric wavelength converter monolithically integrated with a loss-coupled DFB probe source. The integrated device is fabricated using a BRS (buried ridge stripe) structure with an undoped InP clad layer on the top of a passive waveguide to reduce high propagation loss. The device exhibited a static extinction ratio of 11 dB. Good performance at 10 Gb/s is obtained with an extinction ratio of 7 dB and a power penalty of 2.8 dB at a 10$^{-9}$ bit error rate.

• Journal of Korea Multimedia Society
• /
• v.4 no.4
• /
• pp.349-355
• /
• 2001

In this paper, we newly propose a performance enhanced CSMA/CD MAC(Medium Access Control) protocol for the Ethernet which changes its operation mode dynamically according to the network status, not fixed it as one of p-persistent mode and non-persistent mode. Dynamic mode change occurs independently on each node, and uses the consecutive success count and the fail count of the frame transmission. The simulation result shows that the dynamic mode change maintains the enhanced network utilization and transmission delay characteristics. Also we show the implementation simplicity of our MAC protocol through its conceptual design using the Ethernet commercial chip as it stands.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.23-24
• /
• 2015

청소 능력을 향상시키기 위해 높은 출력을 갖는 흡입 모터를 탑재한 로봇 청소기의 경우 계통에 연결하여 동작하는 유선 모드와 계통과 분리되어 무선 모드로 동작이 가능하다. 고출력 모터를 구동하기 위하여 듀얼 모드 로봇 청소기는 고용량의 배터리가 필요하고, 그에 따라 배터리 충전기의 용량 또한 증가되어야 한다. 본 논문에서는 듀얼 모드 로봇청소기의 동작 모드를 분석하여 유/무선 동작 및 배터리 충전이 가능한 800W급 전력 변환 장치를 개발하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.2
• /
• pp.142-150
• /
• 2004

A preliminary study of the behavior of ultrasonic guided wave mode in a pipe using a comb transducer for maintenance inspection of power plant facilities has been verified experimentally. The mode identification has been carried out in a pipe using the time-frequency analysis methods such as the wavelet transform(WT) and the short time Fourier transform (STFT), compared with theoretically calculated group velocity dispersion curves for longitudinal and flexural modes. The results are in good agreement with analytical predictions and show the effectiveness of using the time-frequency analysis method to identify the individual modes. It was found out that the longitudinal mode(0,1) is less affected by mode conversion compared with the other modes. Therefore, L(0,1) is selected as an optimal mode for the evaluation of the surface defect in a pipe.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.280-281
• /
• 2000

Internet사용자의 급격한 증가에 따라 저가격이며 대용량의 optical access network의 구축이 시급한 실정이다. 광통신의 infrastructure를 구성하기 위해서는 광모듈의 저가격화가 가장 시급한 문제이다. 광모드 변환기가 집적된 반도체 레이저(SSC-LD)는 단일모드광섬유와의 광결합 손실 및 정렬허용오차, 동작시간, 광출력 등을 향상시킬 수 있어, 광가입자계 광송수신모듈의 가격을 낮출 수 있어 최근 매우 활발히 연구되고 있다. (중략)

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.184-188
• /
• 2001

본 논문에서는 다중대역 피드를 위한 직교모드 변환기를 설계하였다. 직교모드 변환기의 전체적인 모양은 사각 테이퍼진 형태이고, 18-20 GHz 에서 우원 편파와 좌원편파를 발생시키기 위해 테이퍼 부분에 2개의 측면포트를 두고, 직선포트는 30-45 GHz의 광대역에서 -20dB 이하의 반사계수를 가지도록 설계하였다. 직선포트에서의 반사계수 특성을 향상시키기 위해서 측면포트에 얇은 격막을 삽입하였다. 전체적인 설계에 상용소프트웨어인 HFSS$^{R}$를 사용하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1198-1206
• /
• 2003

In this paper, a MMIC waveguide mixer module based upon the novel suggested mode converter for wave-guide-to-microstrip transition was fabricated and measured. The insertion and return losses of the mode converter was optimized by compensating the discontinuity effect between ridge and microstrip with the modification of 50 $\Omega$ microstrip line pattern. Due to the low loss nature of the mode converter, a millimeter wave MMIC mixer chip can be successfully applied as a waveguide module for mmW waveguide communication system. The measured results of the module showed the successful MMIC chip application in waveguide and the negligible degradation of the supplied chip specification.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.327-334
• /
• 2016

In this paper, we propose a hardware architecture of transform and quantization for high-perfornamce HEVC(High Efficiency VIdeo Coding) encoder. HEVC transform decides the transform mode by comparing RDCost to search for the best mode of them. But, RDCost is computed using the bit-rate and distortion which is computed by transform, quantization, de-quantization, and inverse transform. Due to the many calculations and encoding time, it is hard to process high resolution and high definition image in real-time. This paper proposes the method of transform mode decision by comparing sum of coefficient after transform only. We use BD-PSNR and BD-Bitrate which is performance indicator. Based on the experimental result, We confirmed that the decision of transform mode can process images with no significant change in the image quality. We reduced hardware area by assigning different values at the same output according to the transform mode and overlapping coefficient multiplied as much as possible. Also, we raise performance by implementing sequential pipeline operation. In view of the larger process that we used compared with the process of reference paper, Our design has reduced by half the hardware area and has increased performance 2.3 times.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.512-522
• /
• 2005

In this paper, an optimal determination method of the subband-frame size and mode-switching level is proposed for adaptive OFDM-TDD systems in frequency-selective time-varying channels. The optimization problem considering frequency selectivity. user's mobility, and the signaling overhead caused by the mode change information is formulated in the maximum spectral efficiency sense satisfying the target BER. Assuming that subband-frame size is given, the mode-switching level is first optimized so that the spectral efficiency can be maximized satisfying the target BER. The subband-frame size among candidates is then determined, which maximizes the spectral efficiency. Simulation results show that the proposed scheme outperforms conventional schemes, in terms of the spectral efficiency and the BER.