• 전력전자학회논문지
• /
• 제18권2호
• /
• pp.192-198
• /
• 2013

The rapidly growing demand for electric power systems in electric vehicles (EVs) and hybrid electric vehicles (HEVs) require simpler, cost-effective, and higher performance components. In this paper, a novel power conversion system for hybrid electric vehicles is proposed for these needs. The proposed power conversion system reduces the conversion system cost while preserving same functionality. The proposed power conversion system can boost multi-sources to drive a traction motor and to store energy at the same time reducing number of switching components. In this paper, all operational modes of the proposed converter are explained in detail and verified by a computer simulation first. Then, the topology and operational modes are experimentally verified. Based on the results, the feasibility of the proposed multi-mode single leg power conversion system for EV and HEV applications is discussed.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권9호
• /
• pp.590-597
• /
• 2000

Design of single state AC-DC converter with high power factor for low level applications is proposed. The proposed converter is obtained from the integration of a buck-boost converter and the half-bridge DC-DC converter. This converter gives the good power factor correction low line current harmonic distortions and tight output voltage regulations. This converter also has a high efficiency by employing an soft switching method and synchronous rectifier. The modelling and detailed analysis for the proposed converter are performed. To verify the performance of the proposed converter a 100W converter has been designed

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권12호
• /
• pp.739-750
• /
• 2004

In case while M(modulation index) is more than 0.7, the spectrum of motor voltage and current of a conventional two-phase SRP-PWM scheme are not reduced considerably. To solve the problems of a conventional two-phase SRP-PWM, this paper proposes a two-phase SRP-PWM(DZSRP-PWM) with double zero vector mode which zero vector is selected as V(111) in case of M >0.7, and zero vector is selected as V(000) if M < 0.7. For the validity of the proposed method, the PSIM simulations and experiments were achieved. And the simulation and experiment results show that the voltage and current harmonics all over the modulation index are spread to a wide band area.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.210-210
• /
• 2010

에너지 하베스트 기술은 자연의 빛에너지, 휴대용 기기 탑재/부착장치의 미세 진동에너지, 걷거나 뛰는 인간의 신체활동으로 인한 소산에너지 등을 흡수하여 전기에너지로 변환, 전자기기의 전력으로 사용하는 재생형 에너지원이다. 본 논문에서는 그 중 주변 환경에서 에너지를 끌어 쓸 수 있는 기술 중 압전 효과 방식을 이용한 진동 형태의 에너지 하베스트 기술을 활용하여 설계하고 FEM simulation을 통해 분석해보았다. 압전 물질로는 PZT를 사용하고 메탈기반의 캔틸레버로는 구리를 사용하여 크기를 길이, 넓이, 폭 각각 $6{\times}4{\times}0.025mm^3$으로 모델링하여 444Hz의 공진주파수에서 응력이 $2.68e^{+5}Pa$ 발생하는 결과를 얻었다. 그 결과 $d_{33}$ 모드의 전극형태에서 전압을 2.56V 얻을 수 있음을 추론할 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.601-602
• /
• 2008

This paper presents pulse-frequency modulation(PFM) to improve the light-load efficiency. The proposed circuit is designed by using the device parameter of standard $0.13{\mu}m$ CMOS process. The performance of proposed circuit is evaluated by HSPICE simulation Measured efficiency in a light-load is measured 78-90 % for 0.1 to 100mA output current.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.474-475
• /
• 2008

Portable device is powered by the battery. To use portable devices longer time without replacing the battery, you should maximize the lifetime of the battery. If you use efficient DC-DC converter, You can maximize the lifetime of the battery.

• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.136-142
• /
• 2000

With the significant growth of the number of vehicles environmental problems is raised. NOx SOx, and PM emissions in diesel powered vehicles are larger than that in gasoline because the development of pollutants reduction techniques has not been yet achieved. So it is need to develop after-tratment or to convert into alternative fuel to satisfy emission regula-tion. Among the after-treatment systems to reduce the diesel emissions studies with diesel oxidation catalyst(DOC) are done greatly. In this study using DOC reduction efficiency with the change of temperature and catalyst loading was calculated through measurements of CO, HC, PM. and SOX.

• 소음진동
• /
• 제6권6호
• /
• pp.771-779
• /
• 1996

In this paper, double Fourier sine series is used as a modal displacement functions of a rectangular plate and applied to the free vibration analysis of a rectangular plate under various boundary conditions. The method of stationary potential energy is used to obtain the modal displacements of a plate. To enhance the flexibility of the double Fourier sine series, Lagrangian multipliers are utilized to match the geometric boundary conditions, and Stokes' transformation is used to handle the displacements that are not satisfied by the double Fourier sine series. The frequency parameters and mode shapes obtained by the present method are compared with those obtained by MSC/NASTRAN and other analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.484-490
• /
• 2008

For CSLDV, the Chebyshev demodulation (or polynomial) technique and Hilbert transform approach have been used for mode shape reconstruction with harmonic excitation. In this paper, the Hilbert-Huang transform approach was applied as an alternative to impact excitation cases in terms of a numerical approach. The vibration of the tested structure is modeled using impulse response functions. In order to verify this technique, a simply supported beam was chosen as the test rig. With additional innovative steps which are the ideal-band pass filter and the nodal point determination, Hilbert-Huang transformation can be used for a good mode shape reconstruction even in the impact excitation case.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1998년도 제15회 광학 및 양자전자 학술발표회 논문집
• /
• pp.184-185
• /
• 1998

본 논문은 광/전 변환 소자로서, 단일 모드 광섬유로부터 입력되는 1.3$\mu$m 파장의 광신호를 ECL(Emitter Coupled Logic) 레벌의 전기 신호로 입력된 데이터를 출력 시키는 광수신 모듈에 관한 것으로, 초고속정보통신망 구축을 위한 ATM system, B-NT(Briadband Network Terination) system, 10G 전송 system 등에 직접 사용할수 있는 Clock Recevery 없는 155Mbps 광수신 모듈을 소개한다. 또한 광모듈 원가의 대부분을 차지 하고 있는 광패키징 가격 하락을 위하여 Si기판을 이용한 수동 광정렬 방식의 패키징 방법 을 사용하여 소형화, 저렴한 가격, 그리고 소요공정 시간을 단축하였다[1]. 모듈의 신뢰도를 위하여 신뢰성 시험[2] 및 system 시험을 하였으며 BERT(Bit Error Rate Tester)로 측정한 광수신의 평균 수신감도는 -36dB이다.