• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.4
• /
• pp.307-316
• /
• 2001

In this paper, the multiple output forward converter forPC power supply with weighted voltage mode control which improves the characteristics of DC and transient responses is analyzed and designed. The power stage model of this converter including all the major parasitic components is derived and the small signal model is also derived. Determination of the weighting factors and a design procedure for the loop compensation are presented. Finally, the proposed controller is verified through the simulation of three output forward converter with SABER, and the experiment.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2484-2486
• /
• 1999

본 논문에서는 PWM 승압형 컨버터/인버터를 사용한 교류전동기 구동시스템에서 커먼 모드 전압의 크기를 dc 버스 전압 1/3이하로 제한시키는 새로운 공간전압벡터 PWM 기법을 제안한다. Dc 버스 전압의 2/3에 해당하는 커먼 모드 전압 펄스가 발생하는 경우에 대하여 고찰하고 각각의 경우에 대한 인버터 스위칭 시점의 이동을 통한 제거 방법을 제안한다. 제안된 방법은 부가의 하드웨어를 요구하지 않고 소프트웨어적으로 손쉽게 구현될 수 있으며, 전력변환기의 제어성능에 영향을 미치지 않는다는 장점을 가진다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.2
• /
• pp.150-160
• /
• 2002

The free vibration characteristics of the triple cylindrical shells filled with fluid are investigated. The triple cylindrical shells are filled with compressible fluid. The boundary condition is clamped at both ends. Analytical method is developed to evaluate natural frequencies of triple cylindrical shells using Sanders' shell theory and courier series expansion by Stokes' transformation. Their results are compared with those of finite element method to verify the validation of the method developed. The modal characteristics of shells filled with fluid at region 1, 2 and 3 are evaluated.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.3
• /
• pp.43-50
• /
• 2006

In this successive study, the analytical realization of coupled system was introduced using the times series identification and spectrum analysis, which was compared with conventional FFT spectrum. Also, the numerical responses of second order system, which is coupled, were solved using the numerical calculation of Runge-Kutta Gill method. After numerical analysis, the displacement, velocity and acceleration were acquired. Among them, the response of displacement was used for the analysis of time series spectrum. Among several time series, the ARMAX algorithm was proved to be appropriate for the spectrum analysis of the coupled system. Using the separated response of 1st and 2nd mode, the mode was calculated separately. And the responses of mixed modes were also analyzed for calculation of the mixed modes in the coupled system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.3
• /
• pp.36-42
• /
• 2006

The analytical realization of uncoupled system was introduced in this study using times series and its spectrum analysis. The ARMAX spectra of time series methods were compared with the conventional FFT spectrum. Also, the response of second order system uncoupled was solved using the Runge-Kutta Gill method. In this numerical analysis, the displacement, velocity and acceleration were calculated. The displacement response among them was used for the power spectrum analysis. The ARMAX algorithm in time series was proved to be appropriate for the mode estimation and spectrum analysis. Using the separate response of first and second mode, each modes were calculated separately and the response of mixed modes was also analyzed for the mode estimation using several time series methods.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.279-280
• /
• 2014

이 논문에서는 단상 디지털 역률 제어 보상 기법(PFC)을 제안한다. 제안된 방법은 인덕터 전류의 첨두값을 예측하고 기울기 보상 방법을 적용하여 제어기 출력을 생성함으로써 인덕터 전류의 첨두값을 제한하고, 스위칭 한 주기 안에 연속 도통 모드(CCM)과 불연속 도통 모드(DCM) 전류 제어를 완료한다. 따라서 기존 디지털 평균 전류 제어기에서 문제시 되었던 DCM-CCM 변환구간 즉 경계 도통 모드(BCM)에서 입력 전류 왜곡을 저감하였다. 제안된 제어기법의 유효성은 입력 전압 230Vac, 출력 전압 400V, 출력 750W급의 시제품 실험을 통해 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.151-152
• /
• 2018

본 논문에서는 병렬연결 인버터의 seamless mode transfer를 위한 제어기 설계를 수행하였다. 인버터의 경우 계통연계 모드에서는 전류원으로 동작하기 때문에 간접전류를 기반으로 제어를 실행하였고, 단독 운전에서는 인버터가 전압원으로 간주되기에 전압 제어가 필요하다. 또한 여러 대의 분산 발전원에 대해 동일 부하 분담을 위해 드룹제어를 이용하였다. 이러한 제어기들은 PR제어를 기반으로 하여 특정 주파수에 높은 이득을 가지게 하여 제어효율을 향상시켰다. 모드 변환 과정에 있어 전압의 변동을 최대한 줄이기 위한 제어 계획을 수립하였고, 이를 Psim 시뮬레이션으로 증명하였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.5 s.39
• /
• pp.25-33
• /
• 2004

To evaluate the seismic capacity of a multistorey building structures in performance based seismic design, it is needed to convert MDOF model into equivalent SDOF model. This paper presents predictions for interstory drift of multistorey structures using method of converting a MDOF system into an equivalent SDOF model. The principal objective of this investigation is to evaluate appropriateness of converting method through performing nonlinear time history analysis of a multistory building structures and an equivalent SDOF model. Comparing the interstory drift of multistorey structures calculated by time history analysis and those evaluated by an equivalent SDOF model, the adequacy and the validity of converting method is verified. The conclusion of this study is following; A method of converting a MDOF system into an equivalent SDOF model through the nonlinear time history response analysis is valid. Inelastic first mode shapes are expected to be more accurate than elastic first mode shapes in obtaining interstory drift of multistorey structures from equivalent SDOF model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.559-567
• /
• 1999

A piezoelectric flextentional sonar transducer has been simulated using a coupled FE-BEM. The dynamics of the sonar transducer is modelled in three dimensions and is analyzed with external electrical excitation conditions. Different results are available such as steady-state displacement modes, underwater directivity patterns, resonant frequencies, bandwidths, quality factors, output acoustic powers and transmitting voltage responses. It is shown that the present barrel-stave sonar transducer of the piezoelectric material produces flextentional displacements which could be related with higher output power, lower quality factor and more omnidirectional beam pattern than other types of sonar transducers. The results of the present sonar transducer modelling are also compared with those of a commercial package such as ATILA.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.10
• /
• pp.2629-2639
• /
• 1997

The video coding for very low bit-rate has recently received considerable attention, but the conventional coding schemes with block based transform suffer from the blocky effect for the constraints of limited bit-rate. In this paper, we present a video coding system based on wavelet transform and multiresolution motion estimation/compensation for very low bit-rate video. The proposed scheme uses the wavelet transform which is flexible to represent non-stationary image signals and adaptable to the human visual characteristics. The wavelet transformed coefficients are coded by various coding modes in accordance with the sum of absolute error after motion estimation/compensation in wavelet decomposed domain. And simple buffer control technique is applied to handle constant image quality. It is shown that the presented scheme has more acceptable image quality without blocky effects than conventional block based transform video coding.