• Computational Structural Engineering
• /
• v.11 no.4
• /
• pp.287-294
• /
• 1998

입면의 형태가 임의의 층에서 큰 차이를 보이는 3차원 비정형 setback 구조물의 동적 거동 특성과 이들 구조물의 동적 거동에 미치는 바닥 슬래브의 면내 변형 효과를 분석하였다. 비정형 setback 구조물의 전반적인 동적 거동특성을 분석하기 위하여 베이스 부분의 평면적과 타워 부분의 평면적 비(R?), setback 발생위치(L?)등을 매개 변수로 사용하였다. 48개의 비정형 setback 구조물들에 대한 해석 수행 결과 setback 구조물은 정형 구조물에 비해 횡방향 1차 모드의 유효 모드 중량(effective modal weight)이 작게 나타나는 경향을 보이기 때문에 setback 구조물의 동적 거동을 파악하기 위해서는 등가 정적 해석법 대신에 동적 해석을 수행할 필요가 있음을 알 수 있었다. 바닥슬래브의 면내 변형은 보다 긴 구조물의 고유 진동 주기값을 가져오며 모드 순서 및 모드 형상에도 변화를 준다. 이러한 사실은 바닥슬래브의 면내 변형으로 인하여 횡방향 저항 요소들간의 전단력 분포와 층 변위가 영향을 받을 수 있다는 것을 의미한다. 이러한 현상은 횡방향 저항 요소들간의 강성 차가 심한 프레임-전단벽 시스템에서 두드러지게 나타난다.

• Computational Structural Engineering
• /
• v.6 no.1
• /
• pp.17-25
• /
• 1993

여기에서는 진동기초에 관한 해석모델로 실무에서 널리 사용되고 있는 참고문헌[1]의 진동기초 해석모델에 관한 문제점들(로킹진동, 보와 기둥의 연결부에 관한 모형화, 기계 질량의 위치지정, 작용하중의 형태)을 알아보았고, 이 문제점들을 개선한 해석모델들을 소개하였다. 참고문헌[1]의 진동기초 해석모델(모델A)과 개선된 해석모델들간의 해석결과로부터 기존의 해석모델 A는 실제보다 훨씬 긴 고유진동주기를 가져오기 때문에 진동기초에 대한 해석모델로서 부적합함을 알 수 있었다. 여기에서 소개한 해석모델중 모델 D를 이용하면 실제에 매우 가까운 진동기초의 고유진동주기와 모드형상을 얻을 수 있을 것으로 생각되며 기계회전 속도의 변화에 의한 진동기초 고유진동수와의 공진현상에 대한 세심한 검토가 필요하다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.573-583
• /
• 2009

심부암반에 건설되는 지하공동의 형상과 규모는 지질구조, 암반조건 및 건설방법 (굴착, 보 강)에 따라 변화될 수 있으므로 이전에 사용해오던 공동의 크기와 형상을 그대로 답습하는 관행을 탈피하고 지하공동이 갖고 있는 특수한 용도와 목적에 따라 대형화, 심부화 추세로 가고 있는 지하공동의 설계개념을 수립하여야 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.192-197
• /
• 1995

소재의 손실을 최소한 줄이면서 원하는 형상의 제품을 가공하는 가장 기본적인 금속 가공 방법은 금형을 이용하는 금속 성형(metal forming)이다. 본 논문에서는 준정적 금속 성형 문제 해석 에대한 외연적 시간 적분 유한 요소법의 적용성을 평가 하기 위하여 변형모드가 복잡한 박판튜브 (thin-walled tube)의 좌굴문제를 해석하여 변형과정이 이론 및 실험결과와 비교적 잘 일치하는지 살펴보기로 한다. 또한 준정적 금속 성형 문제 해석에 외연적 시간 적분 유한 요소법을 사용할 때 계산 시간을 줄이기 위하여 많이 사용되는 가압속도 조절법(loading velocity control technique) 의 타당성을 평가하기 위하여 박판 튜브와 중실 실린더(solid cylinder)의 변형 속도에 따른 변형 모드의 변화를 비교 관찰하여 기하학적 형상에따른 가압속도 조절법의 적용 가능 여부를 분석하여 보겠다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.107-112
• /
• 2006

In this paper, described is a research on the modal analysis of small DC motor by finite element method fer the vibration reduction. An impact test is performed to obtain the natural frequencies and modal shapes of DC motor, which valuate the usefulness of the finite element analysis model. From the study, we show that this finite element analysis model can be applicable for designing a new motor with improvement in vibration characteristics. As an example, a shape modification of DC motor is performed and its vibration characteristics is discussed in comparison with those of original shape.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6A
• /
• pp.379-387
• /
• 2012

This study investigates free vibration characteristics of new energy harvesting multi-layer block structures with different geometrical shapes using solid and shell finite elements and evaluate their piezoelectric effect on experiments. The two and three-dimensional finite element (FE) delamination models for block structures described in this paper is attractive not only because it shows excellent accuracy in analysis but also it shows the entire vibration mode shape. The FE model using ABAQUS is used for studying free vibrations of multi-layer block structures for various tip mass and PZT. In particular, new results reported in this paper are focused on the significant effects of the global and local vibration modes for various parameters, such as size of block shape, existence of tip mass and hole, and location of tip mass and PZT. In addition, we evaluate the power generation capacity of developed energy block structures through a laboratory-scale experiment.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.3
• /
• pp.73-78
• /
• 1999

The paper describes a theoretical study on the flexural vibration of an elastic flat bar with periodically nonuniform material properties. The approximate solution of the natura1 frequency and mode shape has been obtained using the perturbation technique for sinusoidal modulation of the flexural rigidify and mass density. The numerical solution obtained by using the finite element method verifies the trend of the approximate solution. It appears that distributed vibrations exist in the low modes, and this approach can be extended to the vibration analysis of the p1ate in the flat panel speaker.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.5
• /
• pp.489-494
• /
• 2013

This study aims to understand the mode characteristics of a droplet under a periodic forced vibration. To predict the resonance frequency of a droplet, theoretical and experimental approaches were employed. A high-speed camera was used to capture the various deformation characteristics of a droplet-mode shape, detachment, separated secondary droplet, and skewed deformation. The comparison between the theoretical and the experimental approaches shows a ~10% discrepancy in the prediction of the resonance frequency, which appears to be caused by the effect of contact line friction, nonlinear wall adhesion, and experimental uncertainty. Owing to contact-line pinning and smaller amplitude, the droplet shape becomes symmetric and the size of each lobe at the resonance frequency exceeds that at the neighbor, which is out of resonance.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.11-20
• /
• 2014

This paper aims at comparing and analyzing shear buckling characteristics between sinusoidal corrugation shape and trapezoidal one. For this, I adopted the equal-length trapezoidal corrugation and sinusoidal one for the analytical models, and analyzed their shear buckling characteristics through linear buckling analysis and on its theory. Generally, the shear buckling shapes of corrugated steel plates are classified into local buckling, global buckling, and interactive buckling from the two buckling modes. Sinusoidal corrugation shape, unlike trapezoidal corrugation, does not have flat sides, which causes another tendency in shear buckling mode. Especially, the changes and different aspects of shear buckling on the boundary between local buckling and global buckling appear in different corrugation shapes. According to the analysis results, interactive buckling mode appeared on the boundary of local buckling and global bucking in trapezoidal corrugation. However, in the case of corrugated steel plates with sinusoidal configuration, interactive buckling mode appeared in the part where global bucking takes place. Besides, trapezoidal shapes are of advantages on shear buckling resistance in the local buckling section, and so are sinusoidal shapes in the global buckling section.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.6
• /
• pp.347-353
• /
• 2021

In this study, we presented a novel size optimization framework to control the linear buckling temperature and several buckling modes of plates, by optimizing thickness values of composite structures for practical engineering applications. Predicting the buckling temperature and mode shape of structures is a vital research topic in engineering to achieve structural stability. However, optimizing designs of engineering structures through engineering intuition is challenging. To address this limitation, we proposed a method that combines finite element simulation and size optimization. Based on the idea that the structural buckling temperature and mode shape of a plate are affected by the thickness of the structure, the thickness values of the nodes of the target structure were set as the design variables in this optimization method; and the buckling temperature values, and buckling mode shapes were set as the objective functions. This size optimization method enabled the determination of optimal thickness distributions, to induce the desired buckling temperature values and mode shapes. The validity of the proposed method was verified in terms of their buckling temperature values and buckling mode shapes, using several numerical examples of rectangular composite structures.