• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.6
• /
• pp.597-602
• /
• 2004

In practical applications of guided wave techniques, it is very important but also difficult to identify the propagating modes, and it is preferred to generate and detect a single or less dispersive mode. Also the noncontact method is required in the automated field application. So this paper considers a non-contact guided wave technique with enhanced mode-selectivity, where a laser beam illuminated through arrayed line slits is used as the transmitter and the air-coupled transducer is used as the receiver. The line arrayed laser illumination is a wavelength matching technique that ran generate only a few modes. The air-coupled transducer detects the leaky wave of the propagated guided wave, and by tuning its detection angle we ran detect the selected single mode. Experimental results for a 1mm thick aluminum plate proved the usefulness of the proposed method, and especially it was shown that this method was powerful in the generation and detection of the $a_0$ mode.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.8
• /
• pp.1621-1628
• /
• 2003

Packaging structures to block the propagation of higher­order modes in the shielded microstrip lines are designed. Packaging for microwave circuits is necessary, basically, to isolate and protect circuits from outside environments both physically and electrically. The drawback of packaging is the possibility of higher­order mode propagation, similar to waveguide modes, as the operating frequency increases. One of Possible choices for the higher­order mode suppression is to insert diaphragms to the housing structure. The shielding effects of diaphragms are analyzed using an FEM code. Several parameters such as dispersion, mode conversion, and higher­order mode transmission and reflection are analyzed. The effect of higher­order mode suppression is eminent as the depth or width of a diaphragm is increased in the air region of the microstrip line. It is shown that inductive diaphragm structure can lower ${S_21}$ for the second­order mode incidence by 30㏈, comparing with the conventional capacitive diaphragm structure. Packaging structure analyzed in this paper can be applied usefully to the design of the microwave system in a package such as transmit/receive modules.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.182-184
• /
• 1990

633M He-Ne 레이저의 반사경의 비등방성에 의한 발진 주파수 편이 및 레이저 매질의 분산특성 때문에 기인하는 레이저 주파수 당김효과를 측정하였다. 내부 반사경형 레이저 공진기에서 발진하는 종모드사이의 맥놀이 신호를 RF-스펙트럼 분석기로 분석하므로써 90kHz의 주파수 편이량차를 측정하였다.

• Information and Communications Magazine
• /
• v.10 no.12
• /
• pp.59-70
• /
• 1993

본 논문은 독일 Hamburg대학에서 필자가 수행한 연구 프로젝트인 DFN(Deutsches Forschungsnetz)-Application over ISDN의 일부로서 분산된 Resource의 공유를 위해 ISPBX(ISDN능력을 가진 PABX)를 이용한 근거리 ISDN-PC-Network(ISPBX-LAN)과 이것을 효율적 활용을 위한 단기접속모드(Short Hold Mode)를 소개하고, ISPBX-LAN의 성능을 사용자의 입장에서 기존의 LAN(Ethernet, Token-Ring)과 비교분석하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.07a
• /
• pp.202-203
• /
• 2005

• Korean Journal of Optics and Photonics
• /
• v.22 no.2
• /
• pp.108-113
• /
• 2011

In this paper, we propose the complex differential diagram to classify surface plasmon waveguide modes with single interface. To date, surface plasmon waveguide modes are classified using the sign change of the group velocity in the dispersion relation that describes the interrelations between the real wavenumber of the propagation direction and the photon energy. The surface plasmon waveguide modes have the wavenumbers of the direction perpendicular to that in which the wave propagates as well as of the propagation direction, so it is necessary to classify the modes using all of these wavenumbers. The complex differential diagram is a graphical representation with variables of the difference between the real component and the imaginary component of the wavenumber. Using this diagram, the specific mode classification is possible, and it is easy to comprehensively analyze the wavenumber as the function of the photon energy.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.249-251
• /
• 2013

본 논문은 LCL 필터를 가진 계통연계형 인버터 기반 마이크로그리드가 독립 운전 모드에서 동작할때의 인버터 출력 전압 제어 방식에 대해 다루고 있다. 분산 전원 기반의 마이크로그리드가 독립 운전 모드로 전환될 경우 마이크로그리드는 분산 전원만으로 전체 지역적 부하를 담당해야 하는 의무를 지니게 된다. 따라서 이때 마이크로그리는 전압원으로 가정되며 이를 위해 전압 제어가 수행되어져야 하며 담당하고 있는 부하가 불평형 또는 비선형 부하 일 경우 역상차, 영상차, 특정 차수의 고조파가 발생되기 때문에 기존의 전압 제어 방식을 사용할 경우 출력 전압에 높은 THD 가 발생하게 되며 이는 부하의 성능을 저해하는 요소로 작용한다. 따라서 본 논문에서는 기존의 PI 제어기 대신 특정 주파수에서 높은 제어 게인을 갖게하는 P+ 다중 공진제어기를 선정하였으며 이를 특정 고조파 별로 다중으로 제어함으로써 비선형-불평형 부하 연결에 의한 악영향에 대처하고자 하였다. P+ 다중 공진제어에 의한 출력 전압 THD 개선 효과는 PSIM Simulation 을 통해 검증되었으며 기존의 PI, Advanced PI 제어기와 그 성능이 비교 분석되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2B
• /
• pp.171-177
• /
• 2002

As speed and capacity of optical communication system increase dramatically, polarization-mode-dispersion compensation(PMDC) becomes a hot issue in these days. In this paper, we introduce a new state-of-polarization (SOP) tracking algorithm that can be used in a PMDC system. The new SOP tracking algorithm is also based on optical heterodyne coherent detection technique like the previous algorithm that we have reported before. However, unlike the previous algorithm, the new algorithm requires only three times of measurement in any circumstances to find the exact SOP information so that it can effectively be applied to PMDC system where very fast and stable operation is indispensible.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.9
• /
• pp.805-811
• /
• 2014

In this investigation, we constructed and demonstrated a simple Yb-doped fiber laser, of which longitudinal modes are mode-locked without any additional devices to compensate the dispersion caused by optical components. Non-linear polarization rotation (NPR) was adopted for the mode-locking mechanism and a polarization controller (PC) was used for a kind of spectral filters to restrict the bandwidth for mode-locking. As the result, the laser was successfully operated as mode-locked with the repetition rate of 42.2 MHz and the spectrum was broadened up to approximately 16 nm at 1033 nm center wavelength when the laser was mode-locked. In this paper, the operation of the developed Yb-doped mode-locked laser is explained with the concept of Lyot filter realized by a PC, which enables mode-locking under normal dispersion. In the industrial applications, this laser can be used as a seed laser of the high power lasers for optical manufacturing.

• Korean Journal of Optics and Photonics
• /
• v.7 no.2
• /
• pp.136-141
• /
• 1996

We present a novel description of TE nonlinear guided waves in planar waveguides with two nonlinear bounding thin films. The nonlinear dispersion relations of the nonlinear waveguides are obtained by adopting the nonlinear transfer matrix. The optical properties obtained from these equations include: the power dependence of mode indices, the transition of the field maximum location, and the power distribution. The planar waveguide with self-focusing nonlinear layers shows the optical bistability of power-dependent mode indices, and the critical powers for the optical bistability increase with decreasing thickness of the nonlinear layers. The power distributions display the optical bistabilities, similar to those of nonlinear Fabry-Perot etalon.