• Korean Journal of Construction Engineering and Management
• /
• v.22 no.3
• /
• pp.31-39
• /
• 2021

The modular construction method is an off-site construction method using built-in structures from the manufacturing facilities. Modular construction is commonly applied to buildings which have relatively smaller and simpler structures than other types of buildings. Although modular building has emerged in the domestic construction industry as an alternative building strategy, previous researches on the environmental characteristics of modular building has not been comprehensively studied. Thus, this study empirically analyzed the insulation performance of thermal bridge and condensation parts of the modular buildings by using IR image analysis, Air-Surface Temperature Ratio method, and temperature difference ratio. The insulation performance analysis was conducted by comparing a modular building and a RC building in Seoul. The results shows that there was no significant difference between insulation performances of RC building and modular building. Furthermore

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.4
• /
• pp.65-71
• /
• 2008

The object of this paper is to evaluate on constructability of modular steel frame with the hollow structural steel section to LEB C-shape. A modular building is built with factory-manufacture and site-construction. The advantage of a Modular building presents that enhanced building quality, shortened construction period and easy at an expansion and enlargement for buildings but also has demerits such as size restriction of the modular units according to the Road Traffic Law and Inflexibility of the unit composition. So in this study we use light-weighted structure members with bolted joint for easy Knock-down and traffic, also we evaluated the constructability of this bolted joints type modular buildings.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.6
• /
• pp.124-134
• /
• 2018

Despite the many advantages of modular housing, low preference for modular housing for consumers who are familiar with RC structure leads to high construction cost of modular housing. The cost of modular buildings is about 130% of that of RC structures, so it is urgent to secure economical efficiency of modular buildings. Therefore, in this study, after calculating the savings amount of modular housing by type of construction work, economic analysis was conducted from a long - term perspective. In order to carry out the research, the authors compiled and analyzed the material cost, labor cost, and expenses incurred by each type of work by reclassifying the statement of the modular housing into the factory production and the site installation. After that, Pareto diagrams were created to find a core work that is included in the cost ratio of about 80%, and selected it as a cost reduction subject. Based on the assumption that the market size of domestic modular housing is similar to the level of modular advanced countries such as Japan and European countries, six cost reduction methods were set up that reflects the characteristics of the modular construction method and used for the expert interviews. Cost saving potentials in percentage from the interview were converted to the amount of savings that can be achieved by each type of method when applying the method. Finally, the findings of the study are expected to suggest long-term directions for technical development for modular construction and cost savings.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.4
• /
• pp.459-470
• /
• 2024

As policy support for the modular construction method and measures to expand the market are being prepared, it is time to present and analyze clear tasks for activation. Therefore, this study aims to present core tasks for activating the modular construction method. The tasks were reviewed through analysis of existing research and supplemented through expert interviews to derive 30 core tasks. Following this, a questionnaire survey was conducted to analyze the important and urgent of these core tasks and to determine their priorities. The results of this study can contribute to a strategic approach for solving the core tasks necessary for revitalizing modular construction.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.3-11
• /
• 2015

The current real estate market is in a state that is considerably shrink due to the recession and long-term reduction of trading. In response, the government recently announced an innovative way for the middle-class residential housing and it is taking the lead to activate the real estate market. Meanwhile, the domestic housing market is entering a transition period, including structural changes of household structure, changes from joeonse to rent increasingly. Also single-member households will rise steeply, so that makes the high demand of small houses. In addition, the domestic construction industry is interested in new technology called Modular building. The Modular construction is an off-site construction system that shorten construction period, eco-friendly building technology and mobility etc, which can be used in various field. Overall, there are two major issues of the current market, one is the change of the real estate market, and the other is the modular construction. This study will propose modular business model in the rental market through the analysis the profitability of the modular business scenarios and IRR analysis.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.6
• /
• pp.415-425
• /
• 2016

Load-bearing steel stud wall system is widely used for the middle-to-high rise modular buildings worldwide. Seismic performance is a key issue to apply load-bearing steel stud wall system to modular buildings in Korea. This study proposes a new strap braced steel stud wall system with enhanced seismic performance and design equations considering the flexural behaviour of the vertical outer studs. For the verification, two specimens with different strap braces and vertical outer stud were designed and tested. The test results showed that the total strengths were evaluated to be 1.11 to 1.18 times higher than the predicted values. Usually strap braced walls are considered to have low energy dissipation capacities. The proposed system showed enhanced seismic performance with equivalent damping of 9.42% due to the reduced pinching effects.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.6
• /
• pp.427-435
• /
• 2020

Modular structures are relatively lightweight compared to reinforced-concrete or steel structures. However, it is difficult to achieve structural integrity between the columns of unit modules in a modular structure, which causes undesirable effects on the lateral force resistance capacity against wind and earthquake loads. This is more prominent in modular structures whose overall heights are greater. Hence, a post-tensioned modular structural system is proposed herein to improve the lateral force resistance capacity of a typical modular structure. A post-tensioned column-base connection, which is the main component of the proposed modular structural system, is configured with shapes and characteristics that allow inducing self-centering behaviors. Finite element analysis was then performed to investigate the hysteretic behaviors of the post-tensioned column-base connection. The analysis results show that the hysteretic behaviors are significantly affected by the initial tension forces and beam-column connection details at the base.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.6
• /
• pp.120-130
• /
• 2021

Recently, the government is reinforcing safety management at construction sites to prevent safety accidents in construction works, and the safety management plan of workers is an important situation. Meanwhile, modular construction is expected to be gradually expanded to middle and high-rise buildings, but active measures to ensure worker safety are insufficient. This study is a preliminary study of the development of a checklist for preventive worker safety management. The purpose of this study is to derive a checklist classification system for the safety management of workers in the field of modular construction by preceding studies, case analysis, and expert advisory opinions. The classification system consists of large categories of factory manufacturing, transportation, and on-site construction, and the sub-system consists of six sub-classes: foundation work, frame work, modular frame installation work, finishing work, and facility work. Among them, the sub-classification of modular frame installation work consists of 12 unit works, centering on module lifting and assembly module work, which are the main construction processes. And the classification system reflects the three main management factors and contents for defined safety management. It is expected that the research results of this study can contribute to efficient safety management at the modular construction site.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.3
• /
• pp.263-272
• /
• 2019

Building Information Modeling (BIM) and modular construction are regarded as important technologies that have contributed to advancements in the construction industry. However, the utilization of BIM in current modular construction projects is limited; moreover, there are no specific guidelines pertaining the applications of BIM in modular construction projects. Therefore, this study aims to analyze the utilization of BIM for onsite construction planning in modular construction projects. First, a realistic BIM application was selected through literature review and expert interviews. Then, the construction plan of the modular projects was analyzed to classify the BIM application items into five different categories. The utilization of BIM in each category was then analyzed in terms of necessity and efficiency using a questionnaire. Finally, the BIM Utilization Index (BIM UI) was suggested based on the findings of the survey. As a results, the BIM UI for module point details, lifting plan, other installation details, site layout plan, and schedule plan was 0.811, 0.787, 0.770, 0.729, and 0.699, in the descending order of usability. In addition, through the findings of the study and interviews with experts, a case study for implementation of BIM in modular construction plan was conducted. The results of this study can be used as application guidelines for BIM in future modular construction projects.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.6
• /
• pp.31-37
• /
• 2018

With the progress of national policy researches on the modular construction, many studies have been conducted regarding the standardization of interior building materials. However, studies on the standardization of exterior building materials are still insufficient, and there are no dedicated exterior materials for modular construction. In this regard, this study investigated the necessary of standardization through the analysis on 7 kinds of exterior materials used in general buildings and exterior building materials applied to modular apartment houses in order to establish design criteria for the standardization of dedicated modular exterior materials. Based on the analysis results, assembly reference plane in conjunction with inside dimensions was set, and panelizing standardized in five parts was proposed to solve the problem of low exterior material standardization rate. It also proposed elastic gasket and steel bracket details that can compensate for the fabrication errors of unit boxes and construction errors in stacking.