• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.159-166
• /
• 2004

The beach, a margin between the sea and the land, is an extremely dynamic zone, for it is here that the motion of the sea interacts with the sediment, rock of the land or the artificial barriers. In order to prohibit or retard erosions due to the extreme Typhoon or storm induced waves, man has constructed these of temporary or more permanent nature, but they caused problems of other erosions from the secondary effect of them and a bad influence on the seascape. In considering the energy available to accelerate sediment transport and erosion in the surf zone, where the waves are broken, and offshore beyond the breaker line, the wave height and the wave period should be taken account. Hence, we tried to present an applicability of the submerged artificial Bio-reefs analyzing waves by a numerical model such that they could reduce the wave power without the secondary effect and restoration of marine ecologies. A new technique of beach preservation is by artificial reefs with artificial and/or natural kelps or sea plants. By engineering the geometry of the nearshore reef, the wave attenuation ability of the feature can be optimized Higher, wider and longer reefs provide the greatest barrier against wave energy but material volumes, navigation hazards, placement methods and other factors require engineering considerations for the overall design of the nearshore reefs.

• Journal of KIISE:Information Networking
• /
• v.32 no.4
• /
• pp.515-524
• /
• 2005

As the number of the mobile nodes (MNs) increases in the networks, the signaling traffic generated by mobility management for MNs will increase explosively, and such a phenomenon will probably affect overall network performance. In this paper, we propose a novel analytical approach using a continuous-time Markov chain model and hierarchical network model for the analysis on the signaling load of representative IPv6 mobility support Protocols such as Mobile IPv6 (MIPv6) and Hierarchical Mobile IPv6 (HMIPv6). According to these analytical modeling, this paper derives the various signaling costs, which are generated by an MN during its average domain residence time when MIPv6 and HMIPv6 are deployed under the same network architecture, respectively. In addition, based on these derived costs, we investigate the effects of various mobility/traffic-related parameters on the signaling costs generated by an MN under MIPv6 and HMIPv6. The analytical results show that as the average moving speed of an MN gets higher and the binding lifetime is set . to the larger value, and as its average packet arrival rate gets lower, the total signaling cost generated during its average domain residence time under HMIPv6 will get relatively lower than that under MIPv6, and that under the reverse conditions, the total signaling cost under MIPv6 will get relatively lower than that under HMIPv6.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.6
• /
• pp.498-507
• /
• 2017

Electronic equipments comprised of high density components with various packaging types have been recently applied to a satellite. Therefore, to guarantee high reliability of electrical equipment, a design approach, which can reduce the development period and cost through an early diagnosis in potential risks of failure, should be established. In the previous research, the reliability assesment of the electronic equipments have based on Steinberg's fatigue failure theory. However, this theory was not enough for further investigation of life prediction and reliability of the electronic equipments comprised of various sizes and packaging types due to its theoretical limitations and analysis results sensitivity with regard to different modeling technic. In that case, if detailed finite element model is established, aforementioned problems can be readily solved. However, this approach might arise disadvantage of spending much time. In this paper, to establish strategy for high reliability design of electronic equipment, we performed mechanical reliability evaluation of CCB (Camera Controller Box) at qualification level based on the approach using Sherlock unlike design techniques applied to existing business.

• Journal of Internet Computing and Services
• /
• v.9 no.5
• /
• pp.59-72
• /
• 2008

Computing systems in the modern era are expanding rapidly to include mobile-based businesses that make us of the various convergence distributed business process. This has lead to growing interest in the field of mobile embedded software development methodology, which has in turn lead to the proliferation of the embedded mobility. The use of CBD (Component Based Development) provides reusability, maintainability and portability, all of which are very important and focus issues to the business process. It also comes with the inherent productivity, quality and reliability of CBD. To make efficient use of CBD, though, clarified interface definitions for component integration are necessary. These definitions should be made up of collaborative hierarchical and horizontal architecture layers. Successful definitions should apply an effective framework made up of the architecture and process. In this paper, we describe an interface specification for small grained mobile embedded components(MEC) for the mobile embedded domain to meet maximum user requirements. We build and deploy the reconfigurable design patterns and components (in business domain categories) to make a component hierarchy and business logics for mobile embedded software. Proposed components specification plays a major role in development of the software for handling inconsistency in existing specification. It also includes plenty of specification information, using semantics and modeling based mechanisms to support business processes. We propose a development model of mobile embedded software using CBD for very complex and dynamic mobile business. We can apply it in a plug and play manner to develop the software. We verify that our framework supports very good productivity, quality and maintainability to meet the user's requirements in mobile business.

• Korean Journal of Remote Sensing
• /
• v.27 no.2
• /
• pp.203-211
• /
• 2011

Recently, information communication technologies such as smartphone or mobile app greatly affect various application fields including geo-spatial domain. And development scheme of mobile web app or hybrid app regards as the most important computing technology which is combined each advantage of mobile app and mobile web. Despite these trends, it is general case that satellite images are used for the background image for other contents services. With this motivation, hybrid app for geo-metadata as the base for dissemination and service is designed and implemented as the prototype, in this study. At the design stage, HTML5, which is the core technology on an international standardization process for hybrid app, is applied. In the implementation, PhoneGap and Sencha Touch as mobile SDK(Software Development Kit) supporting HTML5 on cross-platform in open sources are used. In prototype, some KOMPSAT-2 images covering small area and mandatory elements in geo-metafata standard are tested. As mobile industry applications and business service models based on satellite images on mobile platform are progressing and diversifying, it is expected that this approach and implemented prototype are considered as an important reference.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.4
• /
• pp.311-318
• /
• 2016

The VTS concept was located as a principal methods of maritime safety administration in world's major harbors and expected to become the pivotal role for the future of the maritime and harbor society with e-Navigation epoch. If recent limelight concept of big-data has been included in aspect of information gathering and analysis with various studies, it's required advanced studies to improve the information analysis capability and application range of the data that can be mining by the VTS. In this study, contrast to other studies that aimed quantitative analysis as communication number, it can be mining the time information and each of the communication VTS for the target vessel, including qualitative analysis, such as the purpose or the type of communication. This comparison across multiple items of the collected information, and presenting the VTS data mining model (VCDF) that can be analyzed for the purpose of analyzing way, type and number of communication by ship's type, also number of violations through VTS communication. First, In Busan port case, it shows frequently information service and shows frequently communicating with particular types of vessels. Second, Passive VTS carried out notwithstanding many kinds of traffic violations due to communication congestion. This arranged information can be used as data for the analysis, as possible the level of traffic for VTSO situational awareness, which pointed to the 'workloads' in 'IALA Guideline' and could be used as a database for future research of e-Navigation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.315-324
• /
• 2018

This study was conducted to identify and analyze the educational needs for program outcomes in nursing students. Participants included 256 nursing students at K college, and a survey was conducted from October 30 to December 22, 2017. Data was analyzed with SPSS WIN 20.0 using descriptive statistics, t-test, ANOVA, Borich's Needs Analysis, and the Locus for Focus Model. Results found that subjects recognized that the present level was high about 'Apply therapeutic communication skills,' 'Provide fundamental nursing skills' and 'Understanding nursing profession standards'. 'Provide fundamental nursing skills', 'Apply a nursing intervention', 'Understanding legal and ethical standards of nursing practice and implementation' were the most important sub-elements of program outcomes. In according with the Borich's needs value and the Locus for Focus Model, 'Apply a nursing intervention', 'Explain the importance of the role and cooperation within the healthcare team', 'Provide fundamental nursing skills', 'Execute the nursing process', 'Understanding the legal and ethical standards of nursing practice and implement' were identified as the top priorities of educational needs. Results of this study are expected to be used as basic data to develop outcome-based curriculum and nursing education programs.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.1
• /
• pp.5-13
• /
• 2008

Purpose: This review article was written to investigate what kind of forces are acting on the contact lens fitted on the cornea and its subsequent motion. Methods: A capillary action-induced force develops in the tear layer between the lens and cornea, which leads to the restoring force due to difference in layer thickness according to lens rotation. The characteristics of the lens movement can be determined by the various factors such as friction between eyelid and lens, acceleration force based on blinking and the restoring force incorporated with the viscous damping force. A mathematical model which consists of the differential equations and their numerical solution was proposed to analyze the damped motion of lenses. The model predicts the time dependence of lenses during and after the blink varying the BC, blink period and eyelid pressure. Results: It was found that both the blink period and lid pressure increases the movement increases because of the enhanced lid friction. As the BC increases the viscous damping reduces due to the lacrimal layer's increase which resulted in the enhanced lens motion. After blink the lens illustrates the damped oscillation because of the restoring force by the increased lacrimal layer thickness and reduced viscous resistance. The time for the lens to return to the equilibrium shortens as the BC increase because of the resistance reduction. Conclusions: The movement of the contact lens is governed by the characteristics of the lacrimal layer between the lens and cornea as well as the lid blink.

• The Journal of Information Systems
• /
• v.25 no.3
• /
• pp.91-116
• /
• 2016

Purpose Quality and quantity of knowledge in virtual communities is at the discretion of knowledge contributors, and understanding what motivates knowledge contributors' behavior can be invaluable. The purpose of this paper is to find the social aspect of knowledge contribution in virtual communities within the frame of self-determination theory. Also, we seek differential effects of motivation value for novice vs. expert knowledge contributors. Design/methodology/approach Reputation and altruistic motives are studied as antecedents of intrinsic and extrinsic values in contributing knowledge in virtual communities. Gained social connectedness and satisfaction in their knowledge were behaviors studied as dependents of the motivational value. Also, the proposed model was tested for group differences between expert and novice knowledge contributors seeking motivational changes. Self-determination theory is the base theory which explains how externally motivated behaviors can evolve from extrinsically motivated to intrinsic-like behavior with social experiences as knowledge contributors. Findings Analysis of 262 data points gathered from knowledge contributors in Korean virtual communities in 2005 reveals social connectedness as an important dependent variable both for novice and expert knowledge contributors. Group difference analysis shows altruism has negative influence on extrinsic value only for experts. Intrinsic value has a positive influence on satisfaction for both groups alike but the expert group shows a statistically stronger influence than the other.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.209-218
• /
• 2012

Recently, the Field Programmable Stateful Logic Array (FPSLA) was proposed as one of the most promising system integration technologies which will extend the life of the Moore's law. This work is the first proposal of the FPSLA design automation flow, and the approaches to logic synthesis, synchronization, physical mapping, and automatic placement of the FPSLA designs. The synchronization at each gate for pipelining determines the x-coordinates of cells, and reduces the placement to 1-dimensional problems. The objective function and its gradients for the non-linear optimization of the net length and placement density have been remodeled for the reduced global placement problem. Also, a recursive algorithm has been proposed to legalize the placement by relaxing the density overflow of bipartite bin groups in a top-down hierarchical fashion. The proposed model and algorithm are implemented, and validated by applying them to the ACM/SIGDA benchmark designs. The output state of a gate in an FPSLA needs to be duplicated so that each fanout gate can be connected to a dedicated copy. This property has been taken into account by merging the duplicated nets into a hyperedge, and then, splitting the hyperedge into edges as the optimization progresses. This yields additional 18.4% of the cell count reduction in the most dense logic stage. The practicality of the FPSLA can be further enhanced primarily by incorporating into the logic synthesis the constraint to avoid the concentrated fains of gates on some logic stages. In addition, an efficient algorithm needs to be devised for the routing problem which is based on a complicated graph. The graph models the nanowire crossbar which is trimmed to be embedded into the FPSLA fabric, and therefore, asymmetric. These CAD tools can be used to evaluate the fabric efficiency during the architecture enhancement as well as automate the design.