• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.3
• /
• pp.85-90
• /
• 1988

A probabilistic model for the failure in a homogeneous soil slope is presented. The Safety of the slope is measured through its probability of failure rather than the customary factor of safety. The safety margin of slope failure is assumed to follow a normal distribution. Sources of uncertainties affecting characterization of soil property in a homogeneous soil layer include inherent spatial variability., estimation error from insufficient samples, and measurement errors. Uncertainties of the shear strength-along potential failure surface are expressed by one-dimensional random field models. The rupture surface, created at toe of a soil slope, has been considered to propagate towards the boundary along a path following an exponential (log-spiral) law. Having derived the statistical characteristics of the rupture surface and of the forces which act along it, the probability of failure of the slope was found. Finally the developed procedure has been applied in a case study to yield the reliability of a soil slope.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.512-515
• /
• 2012

최근의 재해 발생은 하천에 의한 범람, 제방의 붕괴 등에 의한 피해발생보다는 일정지역에 국한적으로 내수배제 불량, 토사유출, 산사태 등으로 인한 피해의 발생이 증가하고 있다. 특히나 도시지역과 신규개발지역을 중심으로 집중호우로 인한 토사유출 등으로 인한 배수로 막힘, 산사태등의 2차적인 피해가 증가하고 있는 추세이다. 2011년의 서울의 우면산 산사태 등과 같은 도시중심에서의 피해와 강원도 등의 신규개발지역에서의 토사로 인해 2차, 3차 피해는 국지적이고 예측이 불가능한 곳에서 발생되고 있다. 이러한 토사유출, 산사태에 의한 예측기법은 최근의 정보기술의 발달로 인해 보다 다양한 방법의 접근들이 시도되고 있으며, 이에 대한 정량적인 평가기법들이 개발되고 적용되고 있다. 본 연구에서는 산지지형의 소규모 개발지의 토사재해의 위험성을 평가하기 위하여 GIS 기술을 이용한 사면의 안정성과 산사태 위험성을 평가하는 대표적인 방법으로 Pack et al. (1998)이 제안한 수리적 무한사면 안정모델과 결합하여 사면안정분석을 위해 개발된 SINMAP을 이용하여 소규모 개발지역의 토석류 해석과 사면의 안정성 검토 그리고 범용토양공식을 이용하여 토사유출량을 산정하여 개발지역내 사면 및 토사재해의 위험성을 평가하였다. GIS를 이용한 지형적 특성에 따른 사면의 위험성과 토사유출량 해석 결과를 이용하여 소규모 개발지역의 토사재해의 위험성을 정량적이고 다각적으로 평가하여 재해발생에 따른 위험성을 노출하고 이에 대한 대책 수립에 도움이 될 것으로 판단된다.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2001.10a
• /
• pp.69-82
• /
• 2001

본 연구는 절리가 발달한 고속도로 절취 사면들의 안정성을 검토하기 위하여 수행되었다. 물성시험을 바탕으로 한 지질 강도지수(GSI)를 이용하여 절리가 발달한 암반에 대한 최적의 물성을 구하는 과정을 제시하였다. 안정성 검토를 위해 FLAC에 의한 수치해석을 실시하였으며 이 때 사용한 모델은 절리 발달 상태가 균일하게 분포하였으므로 Ubiquitous Joint Model을 선정하였다. 해석은 건기와 우기의 경우로 나누어 실시하였는데 조건에 따라 절리면의 강도를 달리 적용하였다. 본 논문은 굴착 사면에서 쉽게 접할 수 있는 절리암반 환경에서 최적의 물성을 결정하고 이를 이용하여 안정성을 분석할 패 하나의 참고자료로 활용할 수 있을 것이다.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.1
• /
• pp.19-33
• /
• 2016

Stability analysis based on the limit equilibrium method combined with the result of infiltration analysis is commonly used to evaluate the effect of rainfall infiltration on the slope stability. Soil is a three-phase mixture composed of solid particle, water and air. Therefore, a fully coupled mixture theories of stress-deformation behavior and the flow of water and air should be used to accurately analyze the process of rainfall infiltration through soil slope. The purpose of this study is to study the effect of interaction of air and water flow on the mechanical stability of slope. In this study, stability analyses based on the coupled hydro-mechanical model of three-phases were conducted for slope of weathered granite soil widespread in Korea. During the process of hydro-mechanical analysis strength reduction technique was applied to evaluate the effect of rainfall infiltration on the slope stability. The results showed an increase of air pressure during infiltration because rain water continuously displaced the air in the unsaturated zone. Such water-air interaction in the pore space of soil affects the stress-deformation behavior of slope. Therefore, the results from the three-phase model showed different behavior from the solid-water model that ignores the transport effect of air in the pores.

• Geotechnical Engineering
• /
• v.14 no.6
• /
• pp.33-44
• /
• 1998

Preliminary study has been conducted to analyse the co-relation between shallow landslides frequently occurring in rainy seasons and the water infiltration into the slope. The change of stress state due to partial saturation of a soil and hence the reduction of its shear strength have been reviewed. The variation of the safety factor of an infinite planar slope in accordance with various water infiltration scenarios has been estimated by limit equilibrium method to explain the mechanism of shallow slope failure. Numerical analysis under the same condition as those of some models dealt with in the previous method has been carried out by using FLAC, a finite difference program, and the results have been compared with the ones obtained by limit equilibrium method. Both results proved to be identical, which implies the ability of the numerical approach to the problems related to the stability analysis of unsaturated slope with the irregular geometry. Further improvement, however, should be made to apply the present analysis procedure to general slopes since it deals with a simple one.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.9
• /
• pp.77-86
• /
• 2005

Since slope sliding and loss of railway triggered by a rainfall produce instability in the operation of trains, a proper method to estimate the slope stability considering rainfall Is required. from the field study, sliding induced by rainfall depends on the engineering properties of soils, three dimensional aspect of the slope, rainfall intensity and geological conditions of the soil layers. In this study, among various types of sliding, slope Instability caused by the surface runoff water at the concave zones in a slope is investigated. The depth of runoff water is calculated by using the Rational method and Manning equation. The occurrence of runoff water is evaluated by a comparison between the calculated infiltration rate and rainfall intensity. Pressure heads which can be calculated from the modified Iverson model are used to calculate the factor of safety along the vertical depth of the slope. The modified Iverson model considers the depth of runoff water, thus the maximum hydraulic gradient along the depth of slope is greater than one.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.5
• /
• pp.37-51
• /
• 2018

The slope failure due to the rainfall infiltration occurs frequently in Korea, since the depth of the weathered residual soil layer is shallow in mountainous region. Depth of the failure surface is shallow and tends to pass near the interface between impermeable bedrock and soil layer. Soil parameters that have a significant impact on the instability of unsaturated slopes due to rainfall infiltration inevitably include large uncertainties. Therefore, this study proposes a probabilistic analysis procedure by Monte Carlo Simulation which considers the hydraulic characteristics and strength characteristics of soil as random variables in order to predict slope failure due to rainfall infiltration. The Green-Ampt infiltration model was modified to reflect the boundary conditions on the slope surface according to the rainfall intensity and the boundary condition of the shallow impermeable bedrock was introduced to predict the stability of unsaturated soil slope with shallow bedrock under constant rainfall intensity. The results of infiltration analysis were used as inputs of infinite slope analysis to calculate the safety factor. The proposed analysis method can be used to calculate the time-dependent failure probability of soil slope due to rainfall infiltration.

• Economic and Environmental Geology
• /
• v.47 no.1
• /
• pp.49-59
• /
• 2014

Rainfall-induced landslides are caused by reduction of effective stress and shear strength due to rainfall infiltration. In order to analyze the susceptibility of landslides, the statistical analysis approach has been used widely but this approach has the limitation which cannot take into account of landslide triggering mechanism. Therefore, the physically based model which can consider the process of landslide occurrence was proposed and commonly used. However, the most previous physically based model analyses evaluate and consider the strength characteristics for saturated soil only in the susceptibility analysis. But the strength parameters for unsaturated soil such as matric suction should be considered with the strength parameters for saturated soil since the shear strength in unsaturated soil also plays important role in the stability of slope. Consequently this study suggested the modified physically based slope model which can evaluate strength characteristics for both of saturated and unsaturated soils. In addition, this study evaluated the thickness of saturated part in slope with rainfall intensity and hydraulic characteristics of slope on the basis of physically based model. In order to evaluate the feasibility, the proposed model was applied to practical example in Jinbu area, Gangwon-do, which was experienced large amount of landslides in July 2006. The ROC graph analysis was used to evaluate the validation of the model, and the analysis results were compared with the results of the previous analysis approach.

• Geotechnical Engineering
• /
• v.3 no.4
• /
• pp.41-54
• /
• 1987

A stochastic numerical analysis for predicting the groundswater fluctuations in hillside slopes is performed in this paper to account for the uncertainties associated with the rainfall and site characteristics. The effect of spatial variabilities of aquifer parameters and the effect of temporal variability of recharge on the groundwater fluctuations are studied in depth. The Kriging is used to account for the spatial tariabilities of aquifer parameters. This technique prolevides the best linear unbiased estimator of a parameter and its minimum variance from a litsitem number of measured data. A stochastic one-dimensional numerical model is delreloped b) combining the groundwater flow model, the Kriging, and the first-order second-moment analysis. In addition, a two dimensional detelministic groundwater model is developed to study the change of ground water surfas in the transverse direction as well as in the downslope direction. It is revealed that the undulations of the impervious bedrock in addition to the permeability and the specific yield have an important influence on the fluctuations of the groundwater surface. It is also found that th'e groundwater changes significantly in the transverse direction as well as in the downslope direction. The results obtained in this analysis may be used for evaluation of landslide risks due to high porewater pressure.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.5
• /
• pp.65-78
• /
• 2008

In case of cut-slopes or shallow-depth tunnels, sliding along with discontinuities or rotation could play a critical role in judging stability. Although numerical analysis is widely used to check the stability of these cut-slopes and shallow-depth tunnels in early design process, common analysis programs are based on continuum model. Performing continuum model analysis regarding discontinuities is possible by reducing overall strength of jointed rock mass. It is also possible by applying ubiquitous joint model to Mohr-Coulomb failure criteria. In numerical analysis of cut-slope, main geotechnical properties such as cohesion, friction angle and elastic modulus can be evaluated by empirical equations. This study tried to compare two main systems, RMR and GSI system by applying them to in-situ hazardous cut-slopes. In addition, this study applied ubiquitous joint model to simulation model with inputs derived by RMR and GSI system to compare with displacements obtained by in-situ monitoring. To sum up, numerical analysis mixed with GSI inputs and ubiquitous joint model proved to provide most reliable results which were similar to actual displacements and their patterns.