• Korean Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.307-318
• /
• 2010

This study was to analyze the ecological conditions, based on physical habitat, chemical, and biological conditions before (2006, 2007) and after ecological restoration (2009) in five sites of Changwon Stream (CS) and six sites of Nam Stream (NS), respectively, and then to compare ecological health between the two period. The analysis of ecological health was based on the multimetric models of Index of Biological Integrity (IBI) and Qualitative Habitat Evaluation Index (QHEI) along with water chemistry in the streams. For the study, the models of IBI and QHEI were modified as 8 and 11 metric attributes, respectively. For the evaluations, the survey was conducted in the period of 2006~2007 before the restoration and in 2009 after the restoration by the city. Chemical conditions, based on conductivity, in both streams showed a typical longitudinal declines along the axis of the upstream-to-downstream. There were no significant differences (p>0.05) in water quality between the two periods. Values of IBI in the CS and NS averaged 21.6 and 19.7, respectively, indicating a C grade in the criteria of Ministry of Environment, Korea, and there was no significant differences in the IBI between the two periods. Values of QHEI after the restoration averaged 29.2 and 63.2 in the CS and NS, respectively and the values decreased markedly especially, in the NS (35.3) after the restoration. The habitat disturbance was mainly attributed to destructions (i.e., the narrower width of riparian vegetation and higher substrate exposure by the air) of artificial materials by massive flood in 2009. Overall, our results suggest that the restoration was not effective in the two streams between the two periods, even if the budget was used a lot and that such ecological restoration, not considered the natural disaster, may not effect for the stream restoration.

• Journal of Life Science
• /
• v.21 no.11
• /
• pp.1518-1525
• /
• 2011

Sorafenib is the only approved systemic, therapeutic agent for hepatocellular carcinoma (HCC). The use of Ginseng Extract (GE) in cancer patients is growing worldwide; however, drug interaction between sorafenib and GE has not been illuminated. Four different human cancer cell lines including HepG2 were used and immunocompetent mice were implanted subcutaneously with a mouse HCC cell line. Treatment with low dose GE stimulated cell growth, while a high dose inhibited growth. pERK (phosphorylation of extracellular signal-regulated kinase) was concomitantly increased and decreased respective of different doses of GE. Antitumoral effect of sorafenib decreased in non-proliferating phase cells but was sensitized after low dose GE (LDG) treatment. PD98059 (ERK phosphorylation inhibitor) efficiently blocked ERK phosphorylation, resulting in loss of sorafenib sensitization even after LDG treatment. In the HCC mouse model, LDG alone slightly increased tumor size while sorafenib alone significantly decreased it. However, a combination of LDG and sorafenib significantly decreased tumor size compared with sorafenib alone. Increase of pERK was observed in some normal mice organs and mild inflammatory change was observed in some of these organs, suggesting pERK activation by LDG may cause unexpected toxicity in normal cells. GE, dose-dependently, induced stimulation or inhibition in some human cancer cell lines. Combinational use of GE and sorafenib possibly potentiated an antitumoral response to sorafenib. pERK level has been provided as a potential predictive marker for sorafenib. Our result may suggest GE's dual effects in relation to pERK level in HCC cancer cell lines, and that certain doses of GE can sensitize sorafenib.

• Journal of Chest Surgery
• /
• v.32 no.1
• /
• pp.1-4
• /
• 1999

Background: The transplantation of organs between phylogenetically disparate or harmonious species has invariably failed due to the occurrence of hyperacute rejection or accerelated acute rejection. But, concordant cardiac xenograft offer us an opportunity to study xenotransplantation in the absence of hyperacute rejection. Current therapeutics for the prolongation of survival of rodent concordant xenotransplantation are not ideal with many regimens having a high mortality rate. Cyclosporine A & Mycophenolate Mofetil are new immunosuppresive agent which has been shown to be effective at prolonging survival of allograft, as purine synthesis inhibitor. Material and Method: We used white mongrel rats as recipient and mice as donor, divided 4 groups(n=6), control group(Group 1) has no medication or pretreatment, Group 2 has splenectomy as pretreatment 7∼10 days before transplantation, Group 3 has Cyclosporine A treatment group, Group 4 has combined treatment of Cyclosporine A & Mycophenolate Mofetil(RS 61443). We compared survival time. Reuslt: We can't find significant difference of survival time between each groups. Conclusion: We concluded that rejection of cardiac xenograft was different from rejection of allograft, and new immunossuppresive Agent(Mycophenolate Mofetil, Cyclosporine A) was not effective for prolongation of survival time after cardiac xenograft.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.394-405
• /
• 2009

Statement of problem: Crestal bone loss, a common problem associated with dental implant, has been attributed to excessive bone stresses. Design of implant's transgingival (TG) part may affect the crestal bone stresses. Purpose: To investigate if concavely designed geometry at a dental implant's TG part reduces peri-implant bone stresses. Material and methods: A total of five differently configured TG parts were compared. Base model was the ITI one piece implant (Straumann, Waldenburg, Switzerland) characterized by straight TG part. Other 4 experimental models, i.e. Model-1 to Model-4, were designed to have concave TG part. Finite element analyses were carried out using an axisymmetric assumption. A vertical load of 50 N or an oblique load of 50 N acting at $30^{\circ}$ with the implant's long axis was applied. For a systematic stress comparison, a total of 19 reference points were defined on nodal points around the implant. The peak crestal bone stress acting at the intersection of implant and crestal bone was estimated using regression analysis from the stress results obtained at 5 reference points defined along the mid plane of the crestal bone. Results: Base Model with straight configuration at the transgingival part created highest stresses on the crestal bone. Stress level was reduced when concavity was imposed. The greater the concavity and the closer the concavity to the crestal bone level, the less the crestal stresses. Conclusion: The transgingival part of dental implant affect the crestal bone stress. And that concavely designed one may be used to reduce bone stress.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.1
• /
• pp.141-156
• /
• 2008

Market structure analysis is a very useful tool to analyze the competition boundary of the brand or the company. But most of the studies in market structure analysis, the concern lies in nondurable goods such as candies, soft drink and etc. because of the their availability of the data. In the field of durable goods, the limitation of the data availability and the repurchase time period constrain the study. In the analysis of the automobile market, those of views might be more persuasive. The purpose of this study is to analyze the structure of automobile market based on some idea suggested by prior studies. Usually the buyers of the automobile tend to buy upper tier when they buy in the next time. That kind of behavior make it impossible to analyze the structure of automobile market under the level of automobile model. For that reason I tried to analyze the market structure in the brand or company level. In this study, consideration data was used for market structure analysis. The reasons why we used the consideration data are summarized as following. Firstly, as the repurchase time cycle is too long, brand switching data which is used for the market analysis of nondurable good is not avaliable. Secondly, as we mentioned, the buyers of the automobile tend to buy upper tier when they buy in the next time. We used survey data collected in the U.S.A. market in the year of 2005 through questionaire. The sample size was 8,291. The number of brand analyzed in this study was 9 among 37 which was being sold in U.S.A. market. Their market share was around 50%. The brands considered were BMW, Chevrolet, Chrysler, Dodge, Ford, Honda, Mercedes, and Toyota. �� ratio was derived from frequency of the consideration set. Actually the frequency is different from the brand switch concept. In this study to compute the �� ratio, the frequency of the consideration set was used like a frequency of brand switch for convenience. The study can be divided into 2 steps. The first step is to build hypothetical market structures. The second step is to choose the best structure based on the hypothetical market structures, Usually logit analysis is used for the choice best structure. In this study we built 3 hypothetical market structure. They are type-cost, cost-type, and unstructured. We classified the automobile into 5 types, sedan, SUV(Sport Utility Vehicle), Pickup, Mini Van, and Full-size Van. As for purchasing cost, we classified it 2 groups based on the median value. The median value was $28,800. To decide best structure among them, maximum likelihood test was used. Resulting from market structure analysis, we find that the automobile market of USA is hierarchically structured in the form of 'automobile type - purchasing cost'. That is, result showed that automobile buyers considered function or usage first and purchasing cost next. This study has some limitations in the analysis level and variable selection. First, in this study only type of the automobile and purchasing cost were as attributes considered for purchase. Considering other attributes is very needful. Because of the attributes considered, only 3 hypothetical structure could be analyzed. Second, due to the data, brand level analysis was tried. But model level analysis would be better because automobile buyers consider model not brand. To conduct model level study more cases should be obtained. That is for acquiring the better practical meaning, brand level analysis should be conducted when we consider the actual competition which occurred in the real market. Third, the variable selection for building nested logit model was very limited to some avaliable data. In spite of those limitations, the importance of this study lies in the trial of market structure analysis of durable good.

• Journal of the Korean Geographical Society
• /
• v.28 no.4
• /
• pp.285-297
• /
• 1993

For the application of the diffusion equation, slope height and maximum slope angle are calculated from the plotted slope profile. Using denudation rate as a solution for the diffusion equation, an apparent age index can be calculated, which is the total amount of denudation through total time. Plots of slope angle versus slope height and apparent age index versus slope height are useful for determining relative or absolute ages and denudation rates. Mathematical simulation plots of slope angle versus slope height can generate equal denudation-rate lines for a given age. Mathematical simulations of slope angle versus age for a given slope height, for equal denudation-rate at a particular profile site, and for comparing to other sites having controlled ages.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.11S
• /
• pp.3651-3667
• /
• 2000

Recently, in the distributed multimedia environments based on internet, as radical growing technologies, the most of researchers focus on both streaming technology and distributed object thchnology, Specially, the studies which are tried to integrate the streaming services on the distributed object technology have been progressing. These technologies are applied to various stream service mamgements and protocols. However, the stream service management mexlels which are being proposed by the existing researches are insufficient for suporting the QoS of stream services. Besides, the existing models have the problems that cannot support the extensibility and the reusability, when the QoS-reiatedfunctions are being developed as a sub-module which is suited on the specific-purpose application services. For solving these problems, in this paper. we suggested a QoS Integrated platform which can extend and reuse using the distributed object technologies, and guarantee the QoS of the stream services. A structure of platform we suggested consists of three components such as User Control Module(UCM), QoS Management Module(QoSM) and Stream Object. Stream Object has Send/Receive operations for transmitting the RTP packets over TCP/IP. User Control ModuleI(UCM) controls Stream Objects via the COREA service objects. QoS Management Modulel(QoSM) has the functions which maintain the QoS of stream service between the UCMs in client and server. As QoS control methexlologies, procedures of resource monitoring, negotiation, and resource adaptation are executed via the interactions among these comiXments mentioned above. For constmcting this QoS integrated platform, we first implemented the modules mentioned above independently, and then, used IDL for defining interfaces among these mexlules so that can support platform independence, interoperability and portability base on COREA. This platform is constructed using OrbixWeb 3.1c following CORBA specification on Solaris 2.5/2.7, Java language, Java, Java Media Framework API 2.0, Mini-SQL1.0.16 and multimedia equipments. As results for verifying this platform functionally, we showed executing results of each module we mentioned above, and a numerical data obtained from QoS control procedures on client and server's GUI, while stream service is executing on our platform.

• International Area Studies Review
• /
• v.22 no.1
• /
• pp.215-235
• /
• 2018

Policy concerns related to raising fertility rates are not only common interests among the OECD countries, but they are also issues of great concern to South Korea whose fertility rate is the lowest in the world. The fertility rate in South Korea continues to decline, even though most of the national budget has been spent on measures to address this and many studies have been conducted on the increase in the fertility rates. In this regard, this study aims to verify the effectiveness of the detailed factors affecting the fertility rate that have been discussed in the previous studies on fertility rates, and to investigate the overall trend toward enhancing the quality of life and increasing the fertility rate through macroscopic and structural studies under the recognition of problems related to the policy approaches through the case studies of the European countries. Toward this end, this study investigated if a high quality of life in advanced countries contributes to the increase in the fertility rate, which country serves as a state model that has a high quality of life and a high fertility rate, and what kind of social and policy environment does the country have with regard to childbirth. The analysis of the OECD Better Life Index (BLI) and CIA fertility rate data showed that the countries whose people enjoy a high quality of life do not necessarily have high fertility rates. In addition, under the recognition that a country with a high quality of life and a high birth rate serves as a state model that South Korea should aim for, the social characteristics of Iceland, Ireland, and New Zealand, which turned out to have both a high quality of life and a high fertility rate, were compared with those of Germany, which showed a high quality of life but a low fertility rate. According to the comparison results, the three countries that were mentioned showed higher awareness of gender equality; therefore, the gender wage gap was small. It was also confirmed that the governments of these countries support various policies that promote both parents sharing the care of their children. In Germany, on the other hand, the gender wage gap was large and the fertility rate was low. In a related move, however, the German government has made active efforts to a paradigm shift toward gender equality. The fertility rate increases when the synergy lies in the relationship between parents and children; therefore, awareness about gender equality should be firmly established both at home and in the labor market. For this reason, the government is required to provide support for the childbirth and rearing environment through appropriate family policies, and exert greater efforts to enhance the effectiveness of the relevant systems rather than simply promoting a system construction. Furthermore, it is necessary to help people in making their own childbearing decisions during the process of creating a better society by changing the national goal from 'raising the fertility rate' to 'creating a healthy society made of happy families'

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.4
• /
• pp.94-104
• /
• 2018

This study examined photogrammetric reconstruction techniques that can measure the original form of a cultural property utilizing photographs taken in the past. During the research process, photographs taken in the past as well as photograph on the internet of Soswaewon Garden in Damyang(scenic site 40) were collected and utilized. The landscaping structures of Maedae, Aiyangdan, Ogokmun Wall, and Yakjak and natural scenery Gwangseok, of which photographs can be taken from any 360 degree direction from a close distance or a far distance without any barriers in the way, were selected and tested for the possibility of reproducing three-dimensional shapes. The photography method of 151 landscape photographs (58.6%) from internet portal sites for the aforementioned five landscape subjects containing information on the date the photograph was taken, focal length, and exposure were analyzed. As a result of the analysis, it was revealed that the majority of the photographs tend to focus on important parts of each subject. In addition, we discovered that there are two or three photography methods that internet users preferred in regards to each landscape subject. For the purposes of the experiment, photographs in which a single scene consistently appears for each landscape subject and it was determined that there was a high level of preference related to the photography method were analyzed, and three-dimensional mesh shape model was produced with a photoscan program to analyze the reproducibility of three-dimensional shapes. Based on the results of the reproduction, it was relatively possible to reproduce three-dimensional shapes for artifacts such as Ogukmun wall, Maedae, and Aeyangdan, but it was impossible to reproduce three-dimensional images for natural scenery or an object that has similar texture such as Yakjak and Gwangseok. As a result of experimentation related to the reconstruction of three-dimensional shapes with the photographs taken on site using a photography method similar to that of the photographs selected as previously mentioned, there was success related to reproducing the three-dimensional shapes of Yakjak and Gwangseok, of which it was not possible to do so through the photographs that had been collected previously. In addition, through comparison of past and present images, it was possible to measure the exact sizes as well as discover any changes that have taken place. If past photographs taken by tourists or landscape architects of cultural properties can be obtained, the three-dimensional shapes from a particular period of time can be reproduced. If this technology becomes widespread, it will increase the level of accuracy and reliability in regards to measuring the past shapes of cultural landscape properties and examining any changes to the properties.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1509-1521
• /
• 2020

Experiments for validation of surface reflectance produced by Korea Multi-Purpose Satellite (KOMPSAT-3A) were conducted using Chinese Baotou (BTCN) data among four sites of the Radical Calibration Network (RadCalNet), a portal that provides spectrophotometric reflectance measurements. The atmosphere reflectance and surface reflectance products were generated using an extension program of an open-source Orfeo ToolBox (OTB), which was redesigned and implemented to extract those reflectance products in batches. Three image data sets of 2016, 2017, and 2018 were taken into account of the two sensor model variability, ver. 1.4 released in 2017 and ver. 1.5 in 2019, such as gain and offset applied to the absolute atmospheric correction. The results of applying these sensor model variables showed that the reflectance products by ver. 1.4 were relatively well-matched with RadCalNet BTCN data, compared to ones by ver. 1.5. On the other hand, the reflectance products obtained from the Landsat-8 by the USGS LaSRC algorithm and Sentinel-2B images using the SNAP Sen2Cor program were used to quantitatively verify the differences in those of KOMPSAT-3A. Based on the RadCalNet BTCN data, the differences between the surface reflectance of KOMPSAT-3A image were shown to be highly consistent with B band as -0.031 to 0.034, G band as -0.001 to 0.055, R band as -0.072 to 0.037, and NIR band as -0.060 to 0.022. The surface reflectance of KOMPSAT-3A also indicated the accuracy level for further applications, compared to those of Landsat-8 and Sentinel-2B images. The results of this study are meaningful in confirming the applicability of Analysis Ready Data (ARD) to the surface reflectance on high-resolution satellites.