• Journal of Korean Society of Steel Construction
• /
• v.12 no.1 s.44
• /
• pp.9-16
• /
• 2000

The model of load-strain relations for CFT stub columns subjected to centrally compressive axial load is shown in this paper. The modified model of concrete and steel is obtained by using the experimental data and the formulas of that is based on the foreign researcher's result. The purpose of this paper is to suggest the basic data for evaluating the behavior of CFT stub columns to be variable to the strength of concrete and steel.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.462-463
• /
• 2007

신경망을 이용하여 반구형 유도결합형 플라즈마 장비에 대한 전자밀도의 예측모델을 개발하였다. 신경망으로는 Radial Basis function Network를 이용하였고, 신경망의 예측성능은 유전자 알고리즘을 이용하여 최적화하였다. 체계적인 모델링을 위해 $2^4$ 전 인자 (Full Factorial) 실험계획법을 이용하였다. 개발된 모델을 이용하여 공정변수에 따른 전자밀도의 영향을 고찰하였다. 전자밀도는 팁 위치(즉 챔버 높이)에 가장 많은 영향을 받았으며, 소스전력과 압력의 변화에 따른 전자밀도의 변화는 작았다. 팁 위치는 소스전력 변화에 영향을 받지 않았지만, 압력변화는 팁 위치에 따라 복잡하게 전자밀도에 영향을 미쳤다.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.1
• /
• pp.119-128
• /
• 2012

In this study, experimental vibration tests are performed on a real full-scale railway steel plate girder bridge, which resides in open-space environments. Using experimental modal analysis techniques, the modal parameters of the railway steel plate girder bridge yielded by the modal testing of the impact hammer are compared and investigated with the natural frequencies and mode shapes obtained by finite element analysis. This work focuses on the application of model updating techniques to measured experimental data and output-only data from an analytical vibration study that takes into account various geometric and material properties of the bridge members. A finite element model of the railway bridge structure is used to verify the modal experimental results. It is subsequently updated using the corresponding modal identification technique. The basic database is provided to evaluate damage, which can be determined based on the changes in the element properties, resulting from the process of updating the finite element model benchmark and experimental data.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.3
• /
• pp.309-316
• /
• 2015

A state-based peridynamic model is able to describe a general constitutive model from the standard continuum theory. The response of a material at a point is dependent on the deformation of all bonds connected to the point within the nonlocal horizon region. Therefore, the state-based peridynamic model permits both the volume and shear changes of the material which is promising to reproduce the complicated dynamic brittle fracture phenomena, such as crack branching, secondary cracks, cascade cracks, crack coalescence, etc. In this paper, the two-dimensional state-based peridynamic model for a linear elastic plane stress solid is employed. The damage model incorporates the energy release rate and the peridynamic energy potential. For brittle glass materials, the impact of the crack-parallel compressive stress waves on the crack branching pattern is investigated. The peridynamic solution for this problem captures the main features, observed experimentally, of dynamic crack propagation and branching. Cascade cracks under strong tensile loading and secondary cracks are also well reproduced with the state-based peridynamic simulations.

• Tunnel and Underground Space
• /
• v.26 no.6
• /
• pp.508-515
• /
• 2016

In this study, we compared the stability of the pillars by using room and pillar mining method with the four models with different stiffness and pillar overlap ratio. The experimental models consist of two plaster models (overlap ratio 0%, 100%) and two cement models(overlap ratio 0%, 100%). The soft and hard rocks are modeled by plaster and cement models respectively. In these experiments, the model materials with strength values reflecting the calculated scaled factors not been used, so it is not a true scaled model test that reproduces in situ state in the laboratory. Experimental results show that the different overlap ratio pillars are one of the factors that can affect the stability of the mine.

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.105-112
• /
• 2000

Using a commercial epoxy/carbon fiber composite prepreg (DMS 2224) as a model system, the cure kinetics of vitrifying thermoset system were analyzed by isothermal and dynamic-heating experiments. Focusing on the processing condition of high performance composite systems, a phenomenological kinetic model was developed by using differential scanning calorimetry (DSC) and reaction kinetics theories. The model system exhibited a limited degree of cure as a function of isothermal temperature seemingly due to the diffusion-controlled reaction rates. The diffusion-controlled cure reaction was incorporated in the development of the kinetic model, and the model parameters were determined from isothermal experiments. The first order reaction was confirmed from the characteristic shape of isothermal cure thermograms, and the activation energy wes 78.43 kJ/mol. Finally, the proposed model was used to predict a complex autoclave thermal condition, which was composed of several isothermal and dynamic-heating stages.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.3
• /
• pp.224-231
• /
• 2010

Purpose: This study was to investigate how the crestal module design could affect the level of marginal bone stress around dental implant. Materials and methods: A submerged implant of 4.1 mm in diameter and 10 mm in length was selected as baseline model (Dentis Co., Daegu,Korea).A total of 5 experimental implants of different crestal modules were designed (Type I model : with microthread at the cervical 3 mm, Type II model : the same thread pattern as Type I but with a trans-gingival module, Type III model: the same thread pattern as the control model but with a trans-gingival module, Type IV model: one piece system with concave transgingival part, Type V model: equipped with beveled platform). Stress analysis was conducted with the use of axisy mmetric finite element modeling scheme. A force of 100 N was applied at 30 degrees from the implant axis. Results: Stress analysis has shown no stress concentration around the marginal bone for the control model. As compared to the control model, the stress levels of 0.2 mm areas away from the recorded implant were slightly lower in Type I and Type IV models, but higher in Type II, Type III and Type V models. As compared to 15.09 MPa around for the control model, the stress levels were 14.78 MPa, 18.39 MPa, 21.11 MPa, 14.63 MPa, 17.88 MPa in the cases of Type I, II, III, IV and V models. Conclusion: From these results, the conclusion was drawn that the microthread and the concavity with either crestal or trans-gingival modules maybe used in standard size dental implants to reduce marginal bone stress.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.5
• /
• pp.331-338
• /
• 2020

In this study, the characteristic of a 3-D micro-woven material, which is one of the newly developed periodic open-cell structure, is analyzed through various computational simulations. To increase the accuracy of the numerical simulations, the distance between each directional wire is parameterized using six design variables, and its model geometry is precisely discretized using tetrahedron elements. Using the improved computational model, the material properties of the mechanical, thermal, and fluidic behavior are investigated using commercial software and compared with the previous experimental results. By changing the space between the x- and y-directional wires, a parametric test is performed to determine the tendency of the change in the material properties. In addition, the correlation between two different material properties is investigated using the Ashby chart. The result can further be used in determining the optimal pattern and wire spacing in 3-D micro-woven materials.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.3
• /
• pp.194-200
• /
• 2013

In this paper, the results of composite laminate mechanical joints test(ASTM D5961) are compared with the theoretical strength calculations and FEM analysis results. To calculate the S.C.F.(stress concentration factor) on joint strength, equations on metallic and composite materials in ASM Handbook used and compared with experimental results. The difference of joint strength are compared by geometrical parameters and joining types(single/double lap joint). In FEM analysis, to find efficient FEM model on composite laminate mechanical joint, several FEM models are compared with experimental test results.

• CDE review
• /
• v.21 no.1
• /
• pp.7-12
• /
• 2015

본 글을 통해 학생들과 함께 수행한 다양한 디지털 디자인 모델을 기반으로 5가지의 디지털 패브리케이션 방식을 적용하여 여러 실제 인테리어패널의 제작 과정 및 그 결과물들을 요약적으로 소개하였다. 해당 과정은 기존의 분리된 설계와 제작 및 시공이 아닌, 설계-제작 통합적인 접근방법을 활용함으로써 학생들로 하여금 디지털 디자인과 패브리케이션의 효과를 극대화 할 수 있음을 체득하도록 하였다. 패브리케이션 기기 및 재료 등의 차이점에 따라 실제 구현된 모델과 원래의 디지털 모델과의 형상적인 차이점은 아직까지 한계점으로 남을 수 있지만, 비정형적으로 생성된 디지털 디자인의 형상이 직접적으로 실현이 가능하다는 점에서 의의가 있다고 할 수 있다. 또한 패러매트릭 모델링 기법이나 실제 제작 경험이 거의 없는 학생들을 대상으로 개별적인 교육이 아닌 설계-제작 통합적인 교육을 실시함으로써 각 요소들이 어떻게 유기적으로 관련되어 디지털 디자인 과정이나 패브리케이션과정에서 상호 보완적으로 중요한지 직접 체득할 수 있도록 하였다는데 의의가 있다. 본 글에서 소개한 재료를 깎는 등의 방식인 "마이너스"의 방식이 아닌 3D프린팅과 같이 재료를 이용해 만들어가는 "플러스"적인 방식 또한 해당 사례에서 수행되었으며 마찬가지로 다양한 특성을 지니고 있으나, 본 글에서는 전자의 방식에 대해 주로 논하였다. 본 글에서 다룬 제작기법뿐만 아니라 3D프린팅 기술의 발전과 보급에 따라 디지털 패브리케이션 역시 다양하게 진보하고 있으며, 팹랩 등을 통한 학교에서의 건축설계 교육도 다양하게 진화하고 있다. 본 사례 및 기타 실험적인 교육과 선도적인 여러 시도를 통해서, 디지털 디자인과 패브리케이션 영역을 확장시켜나가고 해당 기술의 발전에 적극적으로 보조할 수 있는 교육과정을 수립하고 이행하는데 일조 할 수 있기를 희망한다.