• 제목/요약/키워드: 모달 시험

검색결과 77건 처리시간 0.027초

수치해석과 실험을 통한 안전등급 축전지의 내진검증 (Seismic Qualification of Class 1E Battery by Combined Analysis and Testing)

  • 김영중;박성환;정태영;정정훈
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1992년도 추계학술대회논문집; 반도아카데미, 20 Nov. 1992
    • /
    • pp.87-91
    • /
    • 1992
  • 축전지를 탑재한 프레임형 랙에 대한 공진탐색시험결과를 이용하여 유한요 소에 의한 수치해석모형을 결정하였다. 내진검증시험은 에이징시험을 거친 3 개의 축전지를 포함하여 28개의 축전지를 탑재한 시험랙을 대상으로 수행되 었다. 공진탐색시험으로부터 구한 모달특성치를 이용하여 지진응답을 해석하 였으며 실험치와 부합함을 확인하였다. 시험랙의 지진응답이 실제 설치될 60 개의 축전지를 갖는 전체랙의 응답보다 크므로, 시험랙에 의한 내진검증이 보다 열악한 조건에서 수행되었다고 볼 수 있다. 시험랙에 대한 내진검증시 구조부재의 구조적 안정성과 축전지의 성능유지를 확인한 바 있으므로 전체 랙의 경우에도 내진검증이 이루어졌다고 판단된다.

  • PDF

바이모달 트램 적용 하니컴 샌드위치 복합재 패널의 저속 충격 해석 (Simulation of Low Velocity Impact of Honeycomb Sandwich Composite Panels for the BIMODAL Tram Application)

  • 이재열;정종철;신광복
    • Composites Research
    • /
    • 제20권4호
    • /
    • pp.42-50
    • /
    • 2007
  • 본 논문에서는 바이모달 트램의 차체와 바닥재 구조 재료로 적용되는 2종류의 샌드위치 패널에 대한 충격 손상을 시험과 수치해석을 통해 상호 비교하였다. 적용된 시편은 $100mm{\times}100mm$의 크기를 가지며 저속충격시험기를 사용하여 4가지 경우의 충격에너지에 대해 시험하였다. 또한, 저속충격 조건에 따라 차체 적용 샌드위치 구조물의 저속 충격 특성을 유한요소해석으로 분석하기 위해 범용 외연유한요소해석 프로그램인 LS-DYNA3D를 이용하여 특성을 분석하였다. 이때 금속재와 복합재 재료의 손상모델, 그리고 직교이방성 특성을 갖는 하니컴 재료의 유효손상모델을 제시하기 위하여 기계적 특성 시험을 수행하여 물성 파라메터를 획득하였고, 시험과 해석결과 충격 하중에 대한 샌드위치 패널의 손상 영역과 깊이를 비교적 잘 예측할 수 있음을 증명하였다.

주포 사격시험을 이용한 대형 함정의 모달테스트 (A Modal Testing of Large Naval Vessel Using Main Gun Firing Test)

  • 박미유;한형석;조흥기;김중길;임동빈;이민재
    • 한국산학기술학회논문지
    • /
    • 제12권1호
    • /
    • pp.1-6
    • /
    • 2011
  • 유한요소해석을 통한 대상 구조물의 동특성 해석에 있어서 신뢰성 높은 실제 구조물의 동특성을 정확히 예측하는 해석결과는 얼마나 신뢰성이 높은 유한요소모델을 수립하는가하는 문제와 직결된다고 할 수 있다. 따라서 많은 경험과 노력을 통해 만들어진 모델을 대상으로 모달 테스팅을 통해 관심주파수대역에 걸쳐 모델을 검증하고, 이때 얻어진 데이터를 이용, 모델을 개선하는(Model updating) 작업을 거치게 된다. 본 연구에서는 이와 같이 중량과 크기의 제한으로 인하여 충격망치나 가진기로 가진하기 어려운 함정의 고유진동수 등을 얻기 위한 모달 테스팅 방법으로써 함정의 시운전 항목 중 하나인 주포 사격시험을 이용하여 그 결과와 가능성, 향후 진행방향에 대하여 고찰해 보았다.

모달시험을 통한 국부 구조물 방진대책 수립 (Vibration measures for local structures through modal tests)

  • 권종현;김문수;양성붕;이원석;이봉민
    • 대한조선학회 특별논문집
    • /
    • 대한조선학회 2017년도 특별논문집
    • /
    • pp.14-18
    • /
    • 2017
  • The Lashing bridge and radar mast of ship are upright structures so they are generally exposed to excessive vibration. Recently, the use of low speed main engines for improving fuel efficiency has been increasing, and the excitation frequencies of the main engine are moving to the low frequency band. If the excitation frequencies are coincident with the natural frequencies of the local structure, excessive vibration occurs during main engine operating condition. The modal test is to experimentally determine resonance frequency, mode shape, and damping, which are vibration characteristics of a mechanical structure under dynamic external force. Through this study, the vibration characteristics of the structure are obtained by modal tests and the low vibration measure is applied to the local structures.

  • PDF

고무의 동탄성계수와 손실계수의 주파수 의존성을 평가하기 위한 양팔 샌드위치보 시험법의 연구 (A Double Cantilever Sandwich Beam Method far Evaluating Frequency Dependence of Dynamic Modulus and Damping Factor of Rubber Materials)

  • 김광우;박진택;이덕보;최낙삼
    • Composites Research
    • /
    • 제14권3호
    • /
    • pp.69-76
    • /
    • 2001
  • 본 연구에서는 고무의 동탄성계수와 손실계수에 대한 주파수 의존성을 평가하기 위한 새로운 양팔 샌드위치보 시험법을 제안하였다. 고무층이 삽입되어 접착된 양팔샌드위치보 시험편의 횡진동 거동에 대해 유한요소 모달변형률 에너지법을 조합한 사인스위프 시험을 이용하여 분석하고 동적 점 탄성해석시험 및 단순공진시험 결과와 비교 검토하였다. 양팔 샌드위치보의 횡진동 모드에 따라 고무층의 주파수별 동탄성계수와 재료감쇠계수를 측정하고, 이들을 최소자승오차법에 의거하여 주파수의 이차함수로 회귀시켜 평가할 수 있었다.

  • PDF

Single-Run FRF 측정을 통한 실차 모달 시험 및 모드맵 검증 (Full Vehicle Modal Testing using Single-Run FRF Measurement and Mode Map Validation)

  • 이근수;정승균;김증한
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2008년도 추계학술대회논문집
    • /
    • pp.387-388
    • /
    • 2008
  • Finding reasonable flexural modes from the full vehicle modal testing has always been a difficult job to N&V engineers due to FRF inconsistency, nonlinearity, heavy damping and, in many cases, interactions between global body structural modes and massive isolate/non-isolated subsystem modes. This paper provides a brier overview of the mode map validation using single-run FRF measurement with highly sensitive accelerometers fur the full vehicle modal analysis and then it can be used to characterize the vehicle's global/local vibration performances, especially customer perceived "structural feel" typically below 40Hz.

  • PDF

발전용 소형가스터빈 블레이드 공진 안정성 평가 (Evaluation of Blade Resonance of 5MW Power Generation Gas Turbine)

  • 안성종;박누가;윤태준;석진익
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2011년도 춘계학술대회 논문집
    • /
    • pp.433-438
    • /
    • 2011
  • Doosan has been developing a 5MW class gas turbine engine, DGT-5. Campbell diagram has been used for prediction of possible occurrence of resonances of rotating machinery. The Campbell diagram consists of blade natural frequency and excitation frequency. In this paper, modal characteristics of compressor and turbine blades are investigated and Campbell diagram is obtained. We calculated compressor and turbine blade's natural frequency using ANSYS tool. The result has been verified through test.

  • PDF