• Title/Summary/Keyword: 면처리

Search Result 2,940, Processing Time 0.031 seconds

The Effectiveness of the Dispersant Use during the "Deepwater Horizon" Incident -REVIEW of the Proceedings from 2011 International Oil Spill Conference- (미국 멕시코만 기름유출사고에서 본 유처리제 사용의 효용성 고찰)

  • Cho, Hyun-Jin;Ha, Chang-Woo
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.18 no.1
    • /
    • pp.61-65
    • /
    • 2012
  • Once oil has spilled, oil spill responders use a variety of countermeasures to reduce the adverse effects of spilled oil on the environment. Mechanical methods of containment and recovery are preferred as the first response when the use of other methods fail or are ineffective. In these cases, the application of oil dispersants shall be use only as a last resort. While effectiveness of dispersants in removing oil form the sea surface is proven, the use of dispersants is controlled in almost all countries due to the toxicity of their active agents and the dispersed oil on the marine environment. However, according to reports, after dispersant application, no significant toxicity to fish or shrimp was observed in the field-collected samples. Moreover, the results also indicate that dispersant-oil mixtures are generally no more toxic to the aquatic test species than oil alone. During the Deepwater Horizon Incident, dispersants were applied to floating oil and injected into the oil plume at depth. These decisions were carefully considered by state and federal agencies, as well as BP, to prevent as much oil as possible from reaching sensitive shoreline habitats. Net Environmental Benefit Analysis for dispersant use assumed that dispersants appear to prevent long-term contamination resulting absence of oil in the substrate and will benefit marine wildlife by decreasing the risk of significant contamination to feathers or fur. Further study to use dispersants with scientific baseline is needed for our maritime environment which consistently threaten huge oil spill incidents occurrence.

THE EFFECTS OF VARIOUS TETRACYCLINE HCL CONCENTRATION TREATED ROOW SURFACES ON PROLIFERATION AND SPREADING OF PERIODONTAL LIGAMENT CELLS (다양한 농도의 테트라사이클린로 처리된 치근면이 치주인대세포의 증식과 전개에 미치는 영향)

  • Jung, Oh-Chul;Sun, Jo-Young
    • Journal of Periodontal and Implant Science
    • /
    • v.24 no.3
    • /
    • pp.581-596
    • /
    • 1994
  • This in vitro study was undertaken to obtain optimal tetracycline concentration that aids proliferation and spreading of human periodontal ligament cells, for clinical application in root surfaces of periodontally diseased teeth. Periodontal ligament cells used in this study were obtained from explants of periodontal ligament of 1st premolar teeth which were extracted for the purpose of orthodontic treatment. The cells were cultured in Dulbecco's Modified Eagle Medium(DMEM) supplemented with 100 U/ml penicillin, $100\;{\mu}g/ml$ streptomycin and 10% FBS at $37^{\circ}C$, 100% humidity, 5% $CO_2-95%$ air. Cells were used between the third to 4th passage. After root planing of periodontally extracted teeth, the root slabs were cut with carborundum disk. In the cell proliferation experiment, experimental groups were root planing only group, immersed groups in 25, 50, 75, 100, 150mg/ml aqueous solution of Tetracycline HCl followed by a vigorous rinse in PBS. Human PDL cells at concentration of $1{\times}10^5\;cells/ml$ were seeded in each culture well which contained root slabs and incubated for 6 hours. Then, all of the root slabs were moved into new 24 culture well and incubated 24, 48 and 72 hours. The cell counting was done by inverted phase contrast microscope after trypsinization. The following results were obtained. The cell number was increased in order root planing only group, 25, 150, 50, 75, 100mg/ml of Tetracycline HCl treated group in 24, 48 and 72 hours. The maximal cell number was obtained when the root slabs were immersed in solution with 100mg/ml of Tetracycline HCl. There were statistically significant between the root planing only group and 75, 100 mg/ml of Tetracycline HCl treated group in 24 hours, between the root planing only group and 100mg/ml of Tetracycline HCl treated group in 48 hours, between the root planing only group and 50, 75, 100mg/ml of Tetracycline HCl treated group, between 25 and 100mg/ml of Tetracycline HCl treated group in 72 hours(p<0.05). In the cell spreading experiment, after 30 minutes of incubated, in the root planing only group, the cells were generally round in shape. The cell surface was mostly covered with blebs. The cells started to attach to root surface by cytoplasmic extension in 50, 100mg/ml of Tetracycline HCl treated groups, more numerous cells attached to root surface than root planing only group. Many orifices of dentinal tubule were exposed, cells showed radially spreaded cytoplasm and unspreaded central region of the cell was covered with blebs. After 6 hours of incubation, in the root planing only group, cells showed radially spreaded cytoplasm and were attached flat appearance. In 50, 100mg/ml of Tetracycline HCl treated groups, cellular margin was concaved and cytoplasm showed elongated appearance with polarity. After 24 hours of incubation, in the root planing group, cells showed characteristic polarity. In 50, 100mg/ml of Tetracycline HCl treated groups, cells showed more elongated and spindle - like appearance.

  • PDF

Antimicrobial Activities of Root Surfaces Treated with Tetracycline-Containing Gel and a Mixture of Tetracycline and Citric Acid-Containing Gel : In Vitro study (테트라사이클린 및 테트라사이클린-구연산 혼합젤로 처리한 치근면의 항미생물 활성 변화에 관한 연구)

  • Cheong, Hee-Sun;Han, Soo-Boo;Shim, Chang-Koo
    • Journal of Periodontal and Implant Science
    • /
    • v.25 no.2
    • /
    • pp.372-385
    • /
    • 1995
  • 본 연구의 목적은 비외과적 치주치료시 부가적으로 사용하기 위해 실험적으로 개발한 젤 형태의 테트라사이클린 및 테트라사이클린-구연산 혼합젤의 치근면에 대한 시간에 따른 활성도를 측정하고, 이를 용액 형태의 테트라사이클린 제제 또는 클로르헥시딘 들과 비교하는 것이다. 6명의 환자로 부터 18개의 발치된 치아를 실험대상으로 하였으며, 치아는 발치한 즉시 치석제거술과 치근활택술을 시행한 후 각 각 4개씩 4군으로 나누어 다옴과 같은 처치롤 하였다 ; 1) O.1% 클로르핵시딘 용액에 5분간 침전; 2) 50mg/ml의 테트라사이클린 용액에 5분간 침전; 3) 5% 테트라사이클린 젤에 5 분간 처리 ; 4) 테트라사이클린-구연산 혼합첼로 5 분간 처치; 5) 그리고 2개의 치아는 대조군으로서 멸균된 생리식염수에 5분간 처리하였다. 침전후 치아는 1ml의 tris-buffered saline이 담긴 용기에 옮겨 24시간 간격으로 탈착된 TBS용액올 교체하면서 실온에서 22일간 보관하였다. Porphyromonas gingivalis를 indicator organism으로 하여 microtiter assay를 이용하여 홉광도를 측정 함으로써 제거 된 용액 의 항 미생물 활성올 측정하였다. 1. 50mg/ml 의 테트라사이클린 수용액에 침전되었던 군은 생리식염수로 처리한 군에 비하여 17 일간 클로르헥시딘으로 처리한 군에 비하여는 16일간 항미생물 활성에 있어서 유의성 있는 차이를 보였다. 2. 테트라사이클린 젤과 테트라사이클린-구연산 혼합첼로 처리한 군은 대조군에 비하여 각 각 4일과 3일 까지 활성올 보였다. 3. 0.1% 클로르핵시딘 용액으로 처리한 군은 생리식염수로 처치한 군에 비하여 24시간 밖에 활성을 나타내지 못했다. 4. 전반척으로 테트라사이클린-구연산 혼합첼로 처리한 군에 비하여 테트라사이클린 첼로 처리한 군의 활성이 높았으나 유의성 있는 차이롤 보이지는 않았다.

  • PDF

Investigation on Hydraulic Properties According to Artificial Recharge and Extraction (인공 하수 주입 및 양수에 따른 대수층의 수리학적 특성 연구)

  • Kang, Jeong-Ok;Lee, So-Jung;Kim, Chang-Gyun
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.27 no.9
    • /
    • pp.995-1005
    • /
    • 2005
  • The study with laboratory sandbox model has been carried out to address potential use of reclaimed water, as a countermeasure artificially recharging the coastal aquifer, to effectively prevent from seawater intrusion due to overexploitation. It also investigated plausibility for either preserving or recovering the freshwater interface facing with seawater intrusion. To do this, we assessed hydraulic properties in artificial aquifer seawater/freshwater interface) depending upon the variation of extraction, storage and injection of reclaimed water. The variation of interface between freshwater and seawater were visualized by Surfer 8(Golden Software, USA) according to given experimental conditions. The interface between seawater and freshwater has been sensitively influenced by the change of extraction rate, where seawater zone migrated much faster into freshwater zone even though extraction rate became decreased. However, decreasing recharge rate could slow down moving of saline water zone toward freshwater zone. When the recharge was solely introduced into the sand box model, saline water intrusion was retarded than those of recharge and extraction working together. And also, the level of salinity of saline water was diluted by artificial recharge. It finally revealed that the artificial recharge would hydraulically avoid seawater intrusion while the freshwater sources could be conservatively utilized.

Studies on the Landscape Conservation Measures of the Radial Roadsides in Seoul Area (조경녹화사방(造景綠化砂防)에 관(關)한 연구(硏究))

  • Woo, Bo-Myeong
    • Journal of Korean Society of Forest Science
    • /
    • v.28 no.1
    • /
    • pp.67-96
    • /
    • 1975
  • The serious consequences of the roadside erosion and its impact on sedimentation and deterioration of roadside landscape continue to be documented in Koreas. An analysis on the landscape conservation treatments was made through the field survey for the 8 radial roadsides around Seoul area. This was performed to identify and evaluate the present restoration measures, and to establish the practical standard measures for the landscape conservation treatments on the cut-and banking roadside slopes.

  • PDF

Design of Two Layer Depth-encoding Detector Module with SiPM for PET (SiPM을 사용한 두 층의 반응 깊이를 측정하는 양전자방출단층촬영기기의 검출기 모듈 설계)

  • Lee, Seung-Jae
    • Journal of the Korean Society of Radiology
    • /
    • v.13 no.3
    • /
    • pp.319-324
    • /
    • 2019
  • A depth-encoding detector module with silicon photomultipliers(SiPMs) using two layers of scintillation crystal array was designed, and the position measurement capability was verified using DETECT2000. The depth of interaction of the crystal pixels with the gamma rays was tracked through the image acquired with the combination of surface treatment of the crystal pixels and reflectors. The bottom layer was treated as a reflector except for the optically coupled surfaces, and the crystals of top layer were optically coupled each other except for the outer surfaces so that the light sharing was made easier than the bottom layer. Flood images were obtained through the combination of specular reflectors and random reflectors, grounded and polished surfaces of crystal pixels, and the positions at which layer images were generated were measured and analyzed. The images were reconstructed using the Anger algorithm, whose the SiPM signals were reduced as the 16-channels to 4-channels. In the combination of the grounded surface and all reflectors, the depth positions were discriminated into two layers, whereas it was impossible to separate the two layers in the all polished surface combinations. Therefore, using the combination of grounded surface crystal pixels and reflectors could improve the spatial resolution at the outside of the field of view by measuring the depth position in preclinical positron emission tomography.

Seismic Data Processing for a BSR related to a Gas Hydrate of the East Sea (BSR 확인을 위한 동해 가스 하이드레이트 탐사자료 처리)

  • Jang, Seong-Hyung;Ryu, Byong-Jae;Suh, Sang-Yong
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2005.06a
    • /
    • pp.626-629
    • /
    • 2005
  • 새로운 에너지 자원으로 활용 가능성을 포함하고 있는 가스 하이드레이트를 조사하기 위해 한국지질자원연구원에서는 동해일원에서 탄성파탐사를 실시하고 있다. 탄성파 반사자료로부터 가스 하이드레이트 부존여부를 확인하는 방법은 해저면과 평행하면서 위상이 반대로 나타나는 고진폭 반사파 BSR (Bottom Simulating Reflect ion)과 BSR 상부에서의 진폭감소, 하부에서 진폭증가와 구간속도 감소 등을 들 수 있다. 그러나 고진폭 반사파는 free gas 또는 실리카를 포함하는 퇴적층에서도 발생하므로 이를 구별할 수 있는 방법이 필요하다. 여기에서는 가스 하이드레이트 탐사자료에 대한 일반자료처리와 함께 가스층 존재 유무를 확인하는 방법으로 많이 이용되는 탄성파 복소분석법을 적응하였다. 가스 하이드레이트 부존 유망지역에 대해 순간진폭, 순간진폭에 대한 1차, 2차 미분, 순간위상, 순간주파수 단면도를 제작하여 중합단면도와 비교하였으며 그 결과 순간진폭단면도의 경우 강한 BSR이 나타나는 지층경계면에서 순간진폭변화 차이를 강하게 보였으며, 순간주파수 단면도의 경우 BSR지역에서 고주파에서 저주파수로 변화함을 확인할 수 있었다.

  • PDF

Path Planning and Control of an Articulated Robot for Polishing Large Aspherical Surface (대구경 비구면 연마를 위한 다관절 로봇의 경로 계획 및 제어)

  • Kim, Ji-Su;Lee, Won-Chang
    • Journal of IKEEE
    • /
    • v.23 no.4
    • /
    • pp.1387-1392
    • /
    • 2019
  • Aspherical mirrors have lighter weight and better performance than spherical mirrors, but it is difficult to process their shape and measure the processing precision. Especially, large aperture aspherical mirrors mounted on satellites need high processing precision and long processing time. The computerized numerically controlled machine of gantry type has been used in polishing process, but it has difficulties in processing the complex shapes due to the lack of degrees of freedom. In order to overcome this problem we developed a polishing system using an articulated industrial robot. The system consists of tool path generating program, real-time robot monitoring, and control program. We show the performance of the developed system through the computer simulation and actual robot operation.

Robust Output Feedback Control Using a Servocompensator (서보보상기를 사용한 견실 출력귀환제어)

  • Lee, Ho-Jin;Lee, Keum-Won
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.8 no.3
    • /
    • pp.217-221
    • /
    • 2007
  • This paper deals with the robust nonlinear controller design using output feedback for a Chua circuit which is one of the well-known nonlinear models. First, an exosystem for reference signal tracking is defined, and error dynamic equations are derived from the differentiation of the output tracking error equation. The normal sliding surface is modified using the integral type servo compensator. The parameters in the equations of the modified sliding surface and servo compensator are determined by using the Hurwitz condition of stability. Especially the error signals can't be obtained directly from the output because all parameters are assumed unknown. So instead, a high gain observer is designed. From this estimated error signals, a stabilizing controller is designed. Simulation is done for demonstrating the effectiveness of the suggested algorithm.

  • PDF

Analysis of Wave Responses in Harbor Using Boundary Damper Techniques (경계 damper를 이용한 항만 파낭응답 해석)

  • 정원무;박우선
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.5 no.1
    • /
    • pp.39-44
    • /
    • 1993
  • This paper is concerned with developing a finite element model incorporating boundary damper techniques which is applicable to the prediction of wave agitations in harbors. Based on the linear wave theory, a mild-slope equation is used. In order to consider the wave energy dissipations on solid boundary. the partial reflecting boundary condition is introduced. Radiating boundary condition is modeled by using tile second-order boundary damper developed by Bando et al. (1984). The near field region in harbor is discretized using 8-noded isoparametric elements, the boundary conditions are presented using 3-noded line elements. The numerical model is applied to a fully open rectangular harbor to prove its validity. Numerical experiments are also performed to investigate the effects of the wave reflection coefficients of solid boundary and the types of the dampers.

  • PDF