• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.64-71
• /
• 2014

Multiplier performs a complex arithmetic operation in various signal processing algorithms such as multimedia and communication system. The multiplier also suffers from its relatively large signal propagation delay, high power dissipation, and large area requirement. This paper presents memristor-CMOS based reconfigurable multiplier reducing area occupation of the multiplier circuitry and increasing compatibility using optimized bit-width for various applications. The performance of the memristor-CMOS based reconfigurable multiplier are estimated with memristor SPICE model and 180 nm CMOS process under 1.8 V supply voltage. The circuit shows performance improvement of 61% for area, 38% for delay and 28% for power consumption respectively compared with the conventional reconfigurable multipliers. It also has an advantage for area reduction of 22% against a twin-precision multiplier.

• Science of Emotion and Sensibility
• /
• v.15 no.2
• /
• pp.193-200
• /
• 2012

The purpose of this study was to investigate the consumer sensibility according to the arrangement and area-ratio of a stripe, and the necktie width. The experimental materials developed for this study were a set of stimuli and necktie sensibility scales. The stimuli were 27 color pictures, in which the necktie width(narrow, medium, wide), stripe arrangement(horizontal, vertical, oblique), and stripe area-ratio(1:1, 1:2, 1:3) were manipulated. The 7-point scale was used for the consumere sensibility. Data were obtained from 270 men and women in their 20s and 30s living in Seoul, Gwangju, Daegu, Jinju, and Changwon on November 2011. For the data analysis, ANOVA and Duncan-test were used by using SPSS program. Results of this study were as follows.; The factors of consumer sensibility according to the arrangement and area-ratio of a stripe, and the necktie width consisted of five dimensions of attractiveness, grace, individuality, ability, and activity. The necktie width showed an independent effect on attractiveness and grace. The stripe arrangement showed an independent effect on attractiveness, grace, individuality, and ability. The stripe area-ratio showed an independent effect on grace. Also, interaction effects of the necktie width and stripe area-ratio on ability were found. The study results are highly expected to be used as valuable sources in plans for necktie products.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.739-742
• /
• 2019

In this paper, we propose enhanced DAP(Dose Area Product). The development of enhanced DAP proposed in this paper has optimized the area dose meter that was developed previously. The development of enhanced DAP performed Optimized design of charge integrator and ADC circuit, optimization of line transceiver for RS-485 communication, optimization of display circuit, and optimization of PC-based control program for interlocking and aging. As a result of evaluating the performance of the proposed system in an accredited testing laboratory, Radiation dose dependence and Radiation quality dependence were measured to be 4.2%, which is below ${\pm}15%$ of international standard. Energy range/Tube voltage was confirmed in the range of 30~150kV. The sensitivity difference between sensor field and sensor field area dose sensitivity was measured to be 4.3%, and it was confirmed that it operates normally under ${\pm}15%$ of international standard. In order to measure the reproducibility of the area dosimeter, it was confirmed that it was 0% and it was operated normally at less than 2% of IEC60580 recommendation. Digital resolution was confirmed to be a minimum unit of $0.01{\mu}Gy{\cdot}m^2$ within the error range for the reference dose per hour.

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.975-980
• /
• 2020

Cervical neural foraminal stenosis is a very common spinal disease that affects a relatively large number of people of all ages. However, since imaging methods that quantitatively provide neural foraminal stenosis are lacking, this study attempts to present quantitative measurement results by reconstructing 3D computed tomography images. Using a 3D reconstruction software, the surrounding bones were removed, including the spinous process, transverse process, and lamina of the cervical spine so that the neural foramen were well observed. Using Image J, a region of interest including the neural foramen area of the 3D image was set, and the number of pixels of the neural foramen area was measured. The neural foramen area was calculated by multiplying the number of measured pixels by the pixel size. In order to measure the widest area of the neural foramen, it was measured between 40-50 degrees in the opposite direction and 15-20 degrees toward the head. The measured cervical neural foramen area showed consistent measurement values. The largest measured area of the right neural foramen C5-6 was 12.21 ㎟, and after 2 years, the area was measured to be 9.95 ㎟, indicating that 18% stenosis had progressed. Since 3D reconstruction using axial CT scan images, no additional radiation exposure is required, and the area of stenosis can be objectively presented. In addition, it is good to explain to patients with neural stenosis while viewing 3D images, and it is considered a good method to be used in the evaluation of the progression of stenosis and post-operative evaluation.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.04a
• /
• pp.32-36
• /
• 1999

본 연구에서는 대공 무기체계의 성능평가를 위한 시뮬레이션 모델의 개발로서 능력추정을 위한 수식의 전개와 전산프로그램을 개발하고 예제를 통하여 능력산출 예를 보였다. 본 연구에서 고려된 시뮬레이션 방법으로 Mon Carlo 시뮬레이션과 Karman Filtering을 사용하였다. 본 모델의 주요 단계로서 1) 가장 최단 경로에서의 표적과 탄두간의 상대 속도와 위치를 결정하고, 2) 표적의 탄두에 대한 취약면적을 산출하고 3) 마지막으로 표적살상 확률을 산정하는 과정의 단계에 따라 개발되었다.

• The Magazine for Energy Service Companies
• /
• s.11
• /
• pp.70-77
• /
• 2001

이 연구는 미국의 ESCO에 의하여 개발된 800개 가량의 데이터베이스를 바탕으로 작성된 것이다. 이 프로젝트들은 누적 투자액이 14억달러에 달하는 에너지 효율 프로젝트를 대표하며 공공연히 이용할 수 있는 ESCO사업의 가장 포괄적인 역사적인 ''스냅 사진''들이다. 우리들은 ESCO프로젝트의 지리적 배분에 대한 정보를 제공하고 시간이 거듭될수록 다양한 분야에서 ESCO들에 의해 행해지는 프로젝트 개발 활동을 분석하며 견적 대비 실제의 입증된 에너지 절감효과를 분석했다. 우리는 또한 다양한 시장 분야(예를 들면, 프로젝트 비용, 건축면적 등)에서의 핵심적인 프로젝트의 특징을 요약하며 이들 프로젝트들을 개발함에 있어서 ESCO들이 의존하는 다양한 형태의 에너지설비 프로그램의 범위에 대하여 논의한다. 우리는 또한 연구로부터 주요한 몇 가지의 정책의 연관에 대하여 언급한다; (1) 중요한 민간 부문의 에너지 효율 활동이 있는 시장, (2) 민간 부문의 활동의 추세와 공공의 목적 또는 지방세 납세자 기금 프로그램과의 관계

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.346-349
• /
• 2006

본 연구에서는 WHPAs와 GIS 프로그램을 이용하여, 지하댐 건설 후 지하수를 효율적이고 안정적으로 양수하기 위해 관정 설치위치를 선정하고, 양수 시 영향반경을 예측하였다. A관정의 지하수 유동방향은 북서방향이고, B관정은 남쪽방향 그리고 C관정은 남서방향이다. 세 개의 관정(A, B, C)에 대하여 양수시 지하수 영향반경 해석을 수행하였다. A관정은 지하수 유동방향이 하천을 향하고 있어 하천의 영향이 적기 때문에 양수 시간에 따른 지하수 영향반경이 크게 차이가 나타난 반면에, B관정과 C관정은 주변의 지하수 유동방향과 하천의 영향으로 양수 시간이 늘어나도 지하수위 영향반경의 면적에 큰 변화가 없는 것으로 나타났다.

• Journal of the Korean Vacuum Society
• /
• v.8 no.1
• /
• pp.55-62
• /
• 1999

Monte Carlo ion scattering program is improved with the single scattering methods where the total cross section and the mean free path are calculated as a function of atomic density during ion scattering in matter. The relations among the parameters of incident ions and substrate materials are investigated to the sputtering phenomena. The sputtering yield has been analyzed with the dependence on the incident ion species and energy, incident angle, and surface binding energy. The energy distribution of sputtered particles is discussed.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.20-22
• /
• 2005

본 연구에서는 유도기의 사용 환경과 운전 조건을 고려하여 출력 1 [MW]급의 대형 유도기를 설계하였다. 유도기의 설계사양은 당사의 유도기 설계 프로그램(=등가회로법)을 통하여 전체적인 사양을 도출하였고, 기계 방정식과 결합된 유한요소 해석 프로그램을 이용하여 세부적인 동특성을 해석하였다. 유도기의 설계 변수는 턴수, 슬롯면적, 운전전압으로 하였고, 구동 주파수 25~60 [Hzl의 범위에서 가장 효율이 높은 유도기를 설계하였다. 해석의 타당성을 검증하기 위하여 샘플용 유도기를 제작하고 부하 시험을 수행하여 해석결과와 비교하였다. 부하 시험은 구동 주파수 25$\sim$60 [Hz]의 범위에서 부하율을 25$\sim$100 [%]로 변화시켜 수행하였다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.45-58
• /
• 2013

The purpose of this study was to analyze the area of occlusal contact points using visual method. One subject was selected who had Angle Class I, normal dentition, without dental caries, periodontal disease and temporomandibular disorders. Forty times PVS impressions were taken and 10 pairs casts were fabricated using dental super hard stone. After mounting the casts with customized loading apparatus, 78.9kg/f force was loaded as a maximum biting force. In T-Scan method, occlusal contact points measurement was repeated twice. Then, using Photoshop program (Adobe photoshop CS3, Adobe. San Jose, USA), the pixels which indicated occlusal contact points by color was recognized, and the distribution of recognized pixels were calculated to area. In Add picture method, polyether bite material applied to the occlusal surface of the casts. Then, the image of the translucent areas was recorded and classified $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$ area by the amount of transmitted light. To acquire occlusal surface, the numbers of pixels from the photograph of the contact area indicated cast converted to $mm^2$. The mean occlusal contact area by two methods was statistically analyzed (paired t-test). Part of the red and pink area in T-Scan image were almost equivalent to the $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$ area in Add picture image. The distribution of occlusal contact points were similar, but the average area of occlusal contact points was wider in T-scan image (P<.05). Pink and red area in T-scan image was wider than $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$ area in Add picture image (P<.05), but similar to $0{\sim}60{\mu}m$area in Add picture image (P>.05). Occlusal contact points in T-scan image did not indicate real occlusal contact points. Occlusal contact areas in T-scan method were enlarged results comparing with those in Add picture method.